DOI QR코드

DOI QR Code

Seismic response of RC frame structures strengthened by reinforced masonry infill panels

  • Massumi, Ali (Department of Civil Engineering, Faculty of Engineering, Kharazmi University) ;
  • Mahboubi, Behnam (Department of Civil Engineering, Faculty of Engineering, Kharazmi University) ;
  • Ameri, Mohammad Reza (Department of Civil Engineering, Faculty of Engineering, Kharazmi University)
  • 투고 : 2014.07.21
  • 심사 : 2015.05.13
  • 발행 : 2015.06.25

초록

The performance of masonry infilled frames during the past earthquakes shows that the infill panels play a major role as earthquake-resistant elements. Experimental observations regarding the influence of infill panels on increasing stiffness and strength of reinforced concrete structures reveal that such panels can be used in order to strengthen reinforced concrete frames. The present study examines the influence of infill panels on seismic behavior of RC frame structures. For this purpose, several low- and mid-rise RC frames (two-, four-, seven-, and ten story) were numerically investigated. Reinforced masonry infill panels were then placed within the frames and the models were subjected to several nonlinear incremental static and dynamic analyses. In order to determine the acceptance criteria and modeling parameters for frames as well as reinforced masonry panels, the Iranian Guideline for Seismic Rehabilitation of Existing Masonry Buildings (Issue No. 376), the Iranian Guideline for Seismic Rehabilitation of Existing Structures (Issue No. 360) and FEMA Guidelines (FEMA 273 and 356) were used. The results of analyses showed that the use of reinforced masonry infill panels in RC frame structures can have beneficial effects on structural performance. It was confirmed that the use of masonry infill panels results in an increment in strength and stiffness of the framed buildings, followed by a reduction in displacement demand for the structural systems.

키워드

참고문헌

  1. Akin, E. and Ozcebe, G. (2013), "CFRP Strengthening of reinforced concrete frames with masonry infill walls: A numerical and parametric study", J. Adv. Mater. Res., 747, 51-54. https://doi.org/10.4028/www.scientific.net/AMR.747.51
  2. Akin, E., Ozcebe, G., Canbay, E. and Binici, B. (2014), "Numerical study on CFRP strengthening of reinforced concrete frames with masonry infill walls", J. Compos. Constr., 18(2), 04013034. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000426
  3. Al-Nimry, H., Resheidat, M. and Al-Jamal, M. (2014), "Ambient vibration testing of low and medium rise infilled RC frame buildings in Jordan", Soil Dyn. Earthq. Eng., 59, 21-29. https://doi.org/10.1016/j.soildyn.2014.01.002
  4. Bertero, V.V. (1977), "Strength and deformation capacities of buildings under extreme environments", Struct. Eng. Struct. Mech., 53(1), 29-79.
  5. BHRC (2005), The Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard No. 2800), Tehran, Iran.
  6. Binici, B., Ozcebe, G. and Ozcelik, R. (2007), "Analysis and design of FRP composites for seismic retrofit of infill walls in reinforced concrete frames", J. Compos. Part B: Eng., 38(5), 575-583. https://doi.org/10.1016/j.compositesb.2006.08.007
  7. Cavaleri, L., Papia, M., Macaluso, G., Di Trapani, F. and Colajanni, P. (2014), "Definition of diagonal poisson's ratio and elastic modulus for infill masonry walls", J. Mater. Struct., 47(1-2), 239-262. https://doi.org/10.1617/s11527-013-0058-9
  8. Cavaleri, L. and Trapani, F.D. (2014), "Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling", J. Soil Dyn. Earthq. Eng., 65, 224-242. https://doi.org/10.1016/j.soildyn.2014.06.016
  9. Celareca, D., Ricci, P. and Dolsek, M. (2012), "The sensitivity of seismic response parameters to the uncertain modelling variables of masonry-infilled reinforced concrete frames", J. Eng. Struct., 35, 165-177. https://doi.org/10.1016/j.engstruct.2011.11.007
  10. Derakhshan, H., Ingham, J.M. and Griffith, M.C. (2009), "Tri-linear force- displacement models representative of out-of-plane unreinforced masonry wall behavior", In 11th Canadian Masonry Symposium, Toronto, Canada.
  11. Dolsek, M. and Fajfar, P. (2008), "The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame - a deterministic assessment", J. Eng. Struct., 30(7), 1991-2001. https://doi.org/10.1016/j.engstruct.2008.01.001
  12. El-Dakhakhni, W.W., Elgaaly, M. and Hamid, A.A. (2003), "Three-strut model for concrete masonry infilled steel frames", J. Struct. Eng., 129(2), 177-185. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(177)
  13. FEMA (2000), "NEHRP guidelines for the seismic rehabilitation of buildings (FEMA 273)", Washington, USA.
  14. FEMA (2000), "Prestandard and commentary for the seismic rehabilitation of buildings (FEMA 356)", Washington, USA.
  15. Fiore, A., Netti, A. and Monaco, P. (2012), "The influence of masonry infill on the seismic behaviour of RC frame buildings", Int. J. Eng. Struct., 44, 133-145.
  16. INBC-06 (2006), Design Loads for Buildings, Tehran, Iran.
  17. Jazanya, R.A., Hajirasouliha, I. and Farshchi, H. (2013), "Influence of masonry infill on the seismic performance of concentrically braced frames", J. Constr. Steel Res., 88, 150-163. https://doi.org/10.1016/j.jcsr.2013.05.009
  18. Madan, A., Reinhorn, A.M., Mander, J.B. and Valles, R.E. (1997), "Modeling of masonry infill panels for structural analysis", J. Struct. Eng., 123(10), 1295-1302. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1295)
  19. Mehrabi, A.B., Shing, P.B., Schuller, M.P. and Noland, J.L. (1996), "Experimental evaluation of masonry infilled RC frames", J. Struct. Eng., 122(3), 228-237. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(228)
  20. Mondal, G. and Tesfamariam, S. (2014), "Effects of vertical irregularity and thickness of unreinforced masonry infill on the robustness of RC framed buildings", Earthq. Eng. Struct. Dyn., 43(2), 205-223. https://doi.org/10.1002/eqe.2338
  21. MPOIRI (2006), The Guideline for Seismic Rehabilitation of Existing Buildings (Issue No. 360), Tehran, Iran.
  22. Murty, C.V.R. and Jain, S.K. (2000), "Beneficial influence of masonry infill walls on seismic performance of RC frame buildings", Proceeding of the 12th WCEE, Auckland, New Zealand.
  23. Nazri, F.M. and Ku, B.F. (2014), "A new lateral load pattern study based on a different limit states", Proceedings of the International Civil and Infrastructure Engineering Conference, Springer, Singapore.
  24. Negro, P. and Verzeletti, G. (1996), "Effect of infills on global behaviour of R/C frames: Energy considerations from pseudodynamic tests", Earthq. Eng. Struct. Dyn., 25(8), 753-773. https://doi.org/10.1002/(SICI)1096-9845(199608)25:8<753::AID-EQE578>3.0.CO;2-Q
  25. Ozden, S., Akguzel, U. and Ozturan, T. (2011), "Seismic strengthening of infilled reinforced concrete frames with composite materials", ACI Struct. J., 108(4), 414-422.
  26. Parsa, F. and Moghadam, A. (2006), "Assessment of the behaviour of RC frame structures infilled with masonry panels under cyclic loading", Msc. Thesis, International Institute of Earthquake Engineering and Seismology, Tehran, Iran.
  27. Saneinejad, A. and Hobbs, B. (1995), "Inelastic design of infilled frames", J. Struct. Eng., 121(4), 634-650. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(634)
  28. Santhi, H.M., Knight, G.M.S. and Muthumani, K. (2005), "Evaluation of seismic performance of gravity load designed reinforced concrete frames", J. Perform. Constr. Facil., 19(4), 277-282. https://doi.org/10.1061/(ASCE)0887-3828(2005)19:4(277)
  29. Smith, S. (1962), "Lateral stiffness of infilled frames", J. Struct. Div., 88(6), 183-199.
  30. SRES-360 (2006), The Iranian Guideline for Seismic Rehabilitation of Existing Structures (Issue No. 360), Tehran, Iran.
  31. SREUMB-376 (2007), The Iranian Guideline for Seismic Rehabilitation of Existing Masonry Buildings (Issue No. 376), Tehran, Iran.
  32. Tasnimi, A.A. and Mohebkhah A. (2005), "Effect of infill vertical irregularity on seismic demands of RC buildings", Proceeding of the 2nd International Conference on Concrete and Development, Tehran, Iran.
  33. Uva, G., Porco, F. and Fiore, A. (2012), "Appraisal of masonry infill walls effect in the seismic response of RC framed buildings: A case study", J. Eng. Struct., 34, 514-526. https://doi.org/10.1016/j.engstruct.2011.08.043
  34. Uva, G., Raffaele, D., Porco, F. and Fiore, A. (2012), "On the role of equivalent strut models in the seismic assessment of infilled RC buildings", Eng. Struct., 42, 83-94. https://doi.org/10.1016/j.engstruct.2012.04.005
  35. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141

피인용 문헌

  1. Performance of RC moment frames with fixed and hinged supports under near-fault ground motions vol.13, pp.1, 2017, https://doi.org/10.12989/eas.2017.13.1.089
  2. Effect of masonry infilled panels on the seismic performance of a R/C frames vol.16, pp.3, 2015, https://doi.org/10.12989/eas.2019.16.3.329
  3. Structural health monitoring of seismically vulnerable RC frames under lateral cyclic loading vol.19, pp.1, 2015, https://doi.org/10.12989/eas.2020.19.1.29
  4. Effect of infill walls on behavior of reinforced concrete special moment frames under seismic sequences vol.28, pp.None, 2020, https://doi.org/10.1016/j.istruc.2020.09.029
  5. Slope topography effect on the seismic response of mid-rise buildings considering topography-soil-structure interaction vol.20, pp.2, 2015, https://doi.org/10.12989/eas.2021.20.2.187