DOI QR코드

DOI QR Code

Preparation and Characterization of Coal Tar Pitch-based Activated Carbon Fibers. II. Cu(II) and Ni(II) Adsorption in Activated Carbon Fibers during Physical Activation

콜타르피치 기반 활성탄소섬유의 제조 및 특성에 관한 연구. II. 물리적 활성화법에 의한 활성탄소섬유의 구리(II), 니켈(II) 흡착 특성

  • Received : 2015.01.23
  • Accepted : 2015.04.11
  • Published : 2015.04.30

Abstract

In this paper, the heavy metal ion adsorption behavior in coal tar pitch-based activated carbon fibers (ACFs) during physical activation is presented. $N_2$ adsorption isotherms at 77 K were examined using Brunauer-Emmett-Teller (BET), Horvath-Kawazoe (H-K), and Barret-Joyner-Halenda (BJH) methods to characterize specific surface area, pore volume, and pore size distribution. The removal of heavy metal ions from ACFs was confirmed by atomic absorption spectroscopy (AAS). Experimental results for the ACFs showed a type I isothermal adsorption curve, which confirmed that the created pores were mostly microporous. After a 40-min steam activation, the fibers showed a high specific surface area of $1,693m^2/g$. In addition, all heavy metal ions in the ACFs were adsorbed after about 20 min, and the adsorption reached equilibrium within 1 h. It was found that the adsorption capacity of the ACFs was improved by the presence of micropores but was also dependent on the specific surface area of the ACF.

Keywords

References

  1. W. K. Park, M. H. Jang, H. Y. Yang, and C. N. Choi, "Adsorption Behavior of Amidoximated PAN Nano Fiber Web for Heavy Metal Ion", Text. Sci. Eng., 2007, 44, 327-332.
  2. D. H. Kim, D. W. Kim, B. H. Kim, K. S. Yang, Y. K. Lim, and E. N. Park, "Study of the Adsorbent-Adsorbate Interactions from Cd(II) and Pb(II) Adsorption on Activated Carbon and Activated Carbon Fiber", J. Korean Chem. Soc., 2013, 57, 104-108. https://doi.org/10.5012/jkcs.2013.57.1.104
  3. T. S. Hwang, H. Y. Song, C. H. Lee, K. J. Kang, E. H. Hwang, and H. G. Woo, “Synthesis of Pan Fibrous Ion-Exchanger by Hydrolysis and Their Adsorption Properties for Nickel Ion”, Polymer(Korea), 2001, 25, 789-795.
  4. S. J. Park and Y. M. Kim, “Adsorption Behaviors of Heavy Metal Ions onto Electrochemically Oxidized Activated Carbon Fibers”, Mater. Sci. Eng. A, 2005, 391, 121-123. https://doi.org/10.1016/j.msea.2004.08.074
  5. J. W. Shim, S. J. Park, and S. K. Rye, "Effect of Modification with $HNO_3$ and NaOH on Metal Adsorption by Pitch-based Carbon Fibers", Carbon, 2001, 39, 1635-1642. https://doi.org/10.1016/S0008-6223(00)00290-6
  6. M. Machida, B. Fotoohi, Y. Amamo, T. Ohbad, H. Kanohd, and L. Mercier, "Cadmium(II) Adsorption Using Functional Mesoporous Silica and Activated Carbon", J. Hazard. Mater., 2012, 221, 220-227.
  7. H. Yanagisawa, Y. Matsumoto, and M. Machida, "Adsorption of Zn(II) and Cd(II) Ions onto Magnesium and Activated Carbon Composite in Aqueous Solution", Appl. Surf. Sci., 2010, 256, 1619-1623. https://doi.org/10.1016/j.apsusc.2009.10.010
  8. M. A. A. Zaini, Y. Amano, and M. Machida, "Adsorption of Heavy Metals onto Activated Carbons Derived from Polyacrylonitrile Fiber", J. Hazard. Mater., 2010, 180, 552-560. https://doi.org/10.1016/j.jhazmat.2010.04.069
  9. H. A. Hanafi and H. S. Hassan, "Sorption of Ni(II), Cu(II) and Fe(III) Ions from Aqueous Solutions Using Activated Carbon", J. Korean Chem. Soc., 2010, 54, 533-540. https://doi.org/10.5012/jkcs.2010.54.5.533
  10. M. A. A. Zaini, Y. Amano, and M. Machida, "Adsorption of Heavy Metals onto Activated Carbons Derived from Polyacrylonitrile Fiber", J. Hazard. Mater., 2010, 180, 552-560. https://doi.org/10.1016/j.jhazmat.2010.04.069
  11. N. K. Yun, H. W. Kwak, M. G. Lee, S. K. Lee, and K. H. Lee, "Electrospun Zein Nanofibrous Membrane for Chromium (VI) Adsorption", Text. Sci. Eng., 2014, 51, 57-62. https://doi.org/10.12772/TSE.2014.51.057
  12. Y. H. Kim, B. H. Lee, Y. S. Cho, and J. H. Yi, "Effect of Pore Properties of Mesoporous Silica on the Metal Adsorption Capacities", Hwahak Konghak, 2001, 39, 228-236.
  13. J. M, Lee, M. I. Kim, and Y. S. Lee, “Selective Removal of Cr (VI) and Cr (III) in Aqueous Solution by Surface Modified Activated Carbon”, Carbon Lett., 2008, 9, 23-27. https://doi.org/10.5714/CL.2008.9.1.023
  14. S. J. Park, Y. M. Kim, and J. S. Shin, "Studies on Anodic Oxidation Treatment of Surface and Heavy Metal Adsorption Properties of Activated Carbon Fibers", J. Korean Ind. Eng. Chem., 2003, 14, 41-47.
  15. S. J. Park and W. Y. Jung, “Removal of Chromium by Activated Carbon Fibers Plated with Copper Metal”, Carbon Sci., 2001, 2, 15-21.
  16. S. J. Park, G. H. Shim, and H. Y. Kim, "Heavy Metal Adsorption of Activated Carbon Fibers with Chelating Groups", Text. Sci. Eng., 2005, 42, 129-135.
  17. S. J. Park, K. D. Kim, and J. R. Lee, “Influence of Activation Temperautre on Surface and Adsorption Properties of PANbased Activated Carbon Fibers/Phenolic Resin Matrix Composites”, Polymer(Korea), 2000, 24, 97-104.
  18. Y. V. Basova, D. D. Edie, Y. S. Lee, L. K. Reid, and S. K. Rye, “Effect of Precursor Composition on the Activation of Pitchbased Carbon Fibers”, Carbon, 2004, 42, 485-495. https://doi.org/10.1016/j.carbon.2003.12.070
  19. C. Kim, Y. M. Kim, and K. S. Yang, “Steam Activation Behaviors of Oxidatively Stabilized Petroleum-based Pitch Fibers Spun by Melt-blown Method”, Carbon Sci., 2002, 3, 93-98.
  20. J. A. Macia-Agullo, B. C. Moore, D. Cazorla-Amoros, and A. Linares-Solano, "Activation of Coal Tar Pitch Carbon Fibers: Physical Activation vs. Chemical Activation", Carbon, 2004, 42, 1367-1370. https://doi.org/10.1016/j.carbon.2004.01.013
  21. F. Rodriguez-Reinoso, M. Molina-Sabio, and M. T. G-onzalez, "The Use of Steam and $CO_2$ as Activating Agents in the Preparation of Activated Carbon", Carbon, 1995, 33, 15-23. https://doi.org/10.1016/0008-6223(94)00100-E
  22. B. B. Park, S. K. Ryu, and B. S. Rhee, "Effect on Activating Agent ($CO_2$, steam) as Preparating of Activated Carbon Fibers", Hwahak Konghak, 1998, 36, 491-495.
  23. Y. S. Lim, K. W. Kim, S. H. Jung, G. D. Kim, and Y. J. Chung, "Preparation of PAN-based Activated Carbon Fibers by Physical Activation", J. Korean Ceram Soc., 1999, 36, 1016-1021.
  24. H. M. Lee, H. R. Kang, K. H. An, H. G. Kim, and B. J. Kim, “Comparative Studies of Porous Carbon Nanofibers by Various Activation Methods”, Carbon Lett., 2013, 14, 180-185. https://doi.org/10.5714/CL.2013.14.3.180
  25. J. S. Roh, "Microstructural Changes during Activation Process of Isotopic Carbon Fibers Using $CO_2$ Gas(I)-XRD Study", Korean J. Mater. Res., 2003, 13, 742-748. https://doi.org/10.3740/MRSK.2003.13.11.742
  26. J. S. Roh and D. S. Suhr, "Activation of Carbon Fibers in $CO_{2}$ Gas(I)-Activation Process of Carbon Fiber", Korean J. Mater. Res., 1998, 8, 114-119.
  27. J. S. Roh and and D. S. Suhr, "Activation of Carbon Fibers in $CO_2$ Gas(I)-Activation Process of Carbon Fiber", Korean J. Mater. Res., 1998, 8, 120-125.
  28. S. M. Lee, C. H. Jung, J. K. Moon, W. Z. Oh, and S. K. Ryu, "The Adsorption of Cu(II), Co(II), Ni(II) from Aqueous Solution onto Activated Carbon Fibers and the Effect of Picolinic Acid", Hwahak Konghak, 1999, 37, 34-40.
  29. J. Yang, P. Juan, Z. Shen, R. Guo, J. Jia, H. Fang, and Y. Wang, “Removal of Carbon Disulfide (CS2) from Water via Adsorption on Active Carbon Fiber (ACF)”, Carbon, 2006, 44, 1367-1375. https://doi.org/10.1016/j.carbon.2005.11.016
  30. J. W. Shim and S. K. Ryu, "Effect of Surface Modification of Activated Carbon Fiber for Adsorption on Copper and Nickel Ions", Hwahak Konghak, 1998, 36, 903-907.