References
- AASHTO(2011), A Policy on geometric design of Highways and Streets.
- Bokare and Maurya(2013), "Study of effect of speed, acceleration and deceleration of small petrol car on ITS tail pipe emission", International journal for traffic and transport engineering, 2013, 3(4):465-478 https://doi.org/10.7708/ijtte.2013.3(4).09
- Choi, Byungnam(2010), "A study on accident features on variation section of cross slope for expressway", Master thesis, Myongji Univ
- Guarnaccia(2010), "Analysis of traffic noise in a road intersection configuration", WSEAS Transactions on systems, issue 8, volume 9, August 2010
- Irene, 2010, "The effects of driving style and vehicle performance on the real-world fuel consumption of U.S. light-duty vehicles, Master thesis, Virginia polytechnic institute and state univ
- Jung jae-hak(2009), "A Hydrodynamic Diffusion Wave Model for Stormwater Runoff on Highway Surfaces at Superelevation Transitions", Doctor of Philosophy, University of Texas at Austin, Austin, Texas
- Jung Sukjin(2011), "A study of the characteristics of traffic accidents in rainy conditions on freeways", master thesis, University of Seoul.
- Kang et al (2013) , "New highway geometric design methods for minimizing vehicular fuel consumption and improving safety", Transportation research part C 31 99-111 https://doi.org/10.1016/j.trc.2013.03.002
- Kim Sangyup et al, 2007, "Theoretical review of highway grades considering vehicle performance", master thesis, University of Seoul.
- Lee seungyong(2008), "A study on the design of vertical grade considering vehicle performance", Master thesis, university of Seoul.
- Ministry of Land, Transport and Maritime Affairs(2012), Road structures and facilities Commentary Guidelines)
- Netional institute of of Enviromental research, 2001, "Survey of greenhouse gas emission of cars"
- Sim Myeongjin(2012), "A study on improvement of the expressway drainage poor site during rainfall", Master thesis, Yonsei Univ
- Son jeongsam et al, 2005, Charateristic study of tire hydroplaning phenomenon to vehicle velocity, Korean Society of Mechanical Engineering, vol29, No10, p1307
- Song Mintae et al, 2013, "Theoretical review on the vertical geometric design standards for high-speed roadway", International Journal of Highway Engineering, Vol.15, No.4 p 177 https://doi.org/10.7855/IJHE.2013.15.4.177
- Oregon department of transportation highway division(2011), ODOT Hydraulics manual
- Rakha and Ding(2003), "Impact of stops on vehicle fuel consumption and emissions", Virginia tech transportation institute, USA
- Ruediger Lamm, Basil Psarianos, Theodor Mailaender.(1999) Highway design and traffic safety engineering handbook. McGraw Hill
- Steven, 2005, "Differences in noise emissions (Lmax) between accelerating vehicle and vehicles driving at steady speed at 30 and 50km/h", European commission dg research
- Texas department of transportation(2014), Criteria For Highway Design Speed Facilities.
- US DOT, 2000, Speed prediction for two-lane rural highways,Publication No.99-171, US Department of Transportation, USA
- Washington state department of transportation(2010), WSDOT Hydraulics manual
Cited by
- Calculation of a Diesel Vehicle's Carbon Dioxide Emissions during Haulage Operations in an Underground Mine using GIS vol.25, pp.4, 2015, https://doi.org/10.7474/TUS.2015.25.4.373