Structural Engineering and Mechanics

  • 제54권6호
  • /
  • Pages.1201-1216
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fracture energy and tension softening relation for nano-modified concrete

  • Murthy, A. Ramachandra (CSIR-Structural Engineering Research Centre) ;
  • Ganesh, P. (CSIR-Structural Engineering Research Centre) ;
  • Kumar, S. Sundar (CSIR-Structural Engineering Research Centre) ;
  • Iyer, Nagesh R. (CSIR-Structural Engineering Research Centre)
  • 투고 : 2014.11.01
  • 심사 : 2015.04.06
  • 발행 : 2015.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the details of size independent fracture energy and bi-linear tension softening relation for nano modified high strength concrete. Nano silica in powder form has been used as partial replacement of cement by 2 wt%. Two popular methods, namely, simplified boundary effect method of Karihaloo et al. (2003) and RILEM (1985) fracture energy with P-${\delta}$ tail correction have been employed for estimation of size independent fracture energy for nano modified high strength concrete (compressive strength ranges from 55 MPa to 72 MPa). It is found that both the methods gave nearly same values, which is an additional evidence that either of them can be employed for determination of size independent fracture energy. Bi-linear tension softening relation corresponding to their size independent fracture energy has been constructed in an inverse manner based on the concept of non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams.

키워드

참고문헌

  1. Abdalla, H.M. and Karihaloo, B.L. (2003), "Determination of size-independent specific fracture energy of concrete from three-point bend and wedge splitting tests", Mag. Concrete Res., 55, 133-141. https://doi.org/10.1680/macr.2003.55.2.133
  2. Abdalla, H.M. and Karihaloo, B.L. (2004), "A method for constructing the bilinear tension softening diagram of concrete corresponding to its true fracture energy", Mag. Concrete Res., 56, 597-604. https://doi.org/10.1680/macr.2004.56.10.597
  3. Bazant, Z.P. and Kazemi, M.T. (1991), "Size dependence of concrete fracture energy determined by RILEM work-of-fracture method", Int. J. Fract., 51, 121-138.
  4. Bazant, Z.P. (1996), "Analysis of work-of-fracture method for measuring fracture energy of concrete", ASCE J. Mater. Civil Eng., 122, 138-144.
  5. Carpinteri, A. and Chiaia, B. (1996), "Size effects on concrete fracture energy: dimensional transition from order to disorder", Mater. Struct. 29, 259-266. https://doi.org/10.1007/BF02486360
  6. Cifuentes, H., Alcalde, M. and Medina, F. (2013), "Measuring the size independent fracture energy of concrete", Strain, 49, 54-59. https://doi.org/10.1111/str.12012
  7. Elices, M., Guinea, G.V. and Planas, J. (1992), "Measurement of the fracture energy using three-point bend tests: part 3-Influence of cutting the P-$\delta$ tail", Mater. Struct., 25, 137-163. https://doi.org/10.1007/BF02472426
  8. Karihaloo, B.L., Abdalla, H.M. and Imjai, T. (2003), "A simple method for determining the true specific fracture energy of concrete", Mag. Concrete Res., 55, 471-481. https://doi.org/10.1680/macr.2003.55.5.471
  9. Guinea, G.V., Planas, J. and Elices, M. (1992), "Measurement of the fracture energy using three-point bend tests: part 1-Influence of experimental procedures", Mater. Struct., 25, 212-218. https://doi.org/10.1007/BF02473065
  10. Hillerborg, A., Modeer, M. and Petersson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6, 773-782. https://doi.org/10.1016/0008-8846(76)90007-7
  11. Hu, X. and Wittmann, F. (1992), "Fracture energy and fracture process zone", Mater. Struct. 25, 319-326. https://doi.org/10.1007/BF02472590
  12. Hu, X. and Wittmann, F. (2000), "Size effect on toughness induced by crack close to free surface", Eng. Fract. Mech., 65, 209-221. https://doi.org/10.1016/S0013-7944(99)00123-X
  13. Jalal, M. (2014), "Corrosion resistant self-compacting concrete using micro and Nano silica admixtures". Struct. Eng. Mech., 51, 403-412. https://doi.org/10.12989/sem.2014.51.3.403
  14. Karihaloo, B.L. (1995), Fracture Mechanics and Structural Concrete, Addison Wesley Longman, UK.
  15. Mindess, S. (1984), "The effect of specimen size on the fracture energy of concrete", Cement Concrete Res., 14, 431-436. https://doi.org/10.1016/0008-8846(84)90062-0
  16. Nallathambi, P., Karihaloo, B.L. and Heaton, B.S. (1985), "Various size effects in fracture of concrete", Cement Concrete Res., 15, 117-126. https://doi.org/10.1016/0008-8846(85)90016-X
  17. Olesen, J.F. (2001), "Fictitious crack propagation in fiber-reinforced concrete beams", J. Eng. Mech., ASCE, 127, 272-280. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:3(272)
  18. Ostergaard, L. (2003), "Early-age fracture mechanics and cracking of concrete", PhD Thesis, The Technical University of Denmark, Lyngby.
  19. Pacheco-Torgal, F. and Jalali, S. (2011), "Nanotechnology: Advantages and drawbacks in the field of construction and building materials UK", Constr. Build. Mater., 25, 582-590. https://doi.org/10.1016/j.conbuildmat.2010.07.009
  20. Pan, Z. (2011), "Fracture properties of geopolymer paste and concrete", Mag. Concrete Res., 63, 763-771. https://doi.org/10.1680/macr.2011.63.10.763
  21. Planas, J., Elices, M. and Guinea, G.V. (1992), "Measurement of the fracture energy using three-point bend tests: part 2-Influence of bulk energy dissipation", Mater. Struct., 25, 305-312. https://doi.org/10.1007/BF02472671
  22. Ramachandra Murthy, A., Karihaloo, B.L., Iyer, N.R. and Raghu Prasad, B.K. (2013), "Determination of Size-independent specific fracture energy of concrete mixes by two methods", Cement Concrete Res., 50, 19-25 https://doi.org/10.1016/j.cemconres.2013.03.015
  23. RILEM TCM-85 (1985), "Determination of the fracture energy of mortar and concrete by means of threepoint bend tests on notched beams", Mater. Struct., 18, 287-290. https://doi.org/10.1007/BF02472918
  24. Sahin, Y. and Koksal, F. (2011), "The influences of matrix and steel fibre tensile strengths on the fracture energy of high strength concrete", Constr. Build. Mater., 25, 1801-1806. https://doi.org/10.1016/j.conbuildmat.2010.11.084
  25. Said, A.M., Zeidan, M.S., Bassuoni, M.T. and Tian, Y. (2012), "Properties of concrete incorporating nanosilica", Constr. Build. Mater., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044
  26. Sanchez, F. and Sobolev, K. (2010), "Nanotechnology in concrete-A review", Constr. Build. Mater., 24, 2060-2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014
  27. Singh, L.P., Karade, S.R., Bhattacharyya, S.K., Yousuf, M.M. and Ahalawat, S. (2013), "Beneficial role of nanosilica in cement based materials-A review", Constr. Build. Mater., 47, 1069-1077. https://doi.org/10.1016/j.conbuildmat.2013.05.052
  28. Stang, H. and Olesen, J.F. (1998), "On the interpretation of bending tests on FRC-materials", Proceedings of the FRAMCOS-3, Fracture Mechanics of Concrete Structures, Aedificatio Publishers, Freiburg, Germany.
  29. Tabatabaei, R., Sanjari, H.R. and Shamsadini, M. (2014), "The use of artificial neural networks in predicting ASR of concrete containing Nano-silica", Comput Concrete, 13, 739-748. https://doi.org/10.12989/cac.2014.13.6.739
  30. Tada, H., Paris, P.C. and Irwin, G.R. (1985), The Stress Analysis of Cracks Handbook, 2nd Edition, St. Louis MO, Paris Productions.
  31. Ulfkjaer, J.P., Krenk, S. and Brincker, R. (1995), "Analytical model for fictitious crack propagation in concrete beams", J Eng Mech., ASCE, 121(1), 7-15. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:1(7)
  32. Vydra, V., Trtik, K. and Vodak, F. (2012), "Size independent fracture energy of concrete", Constr. Build. Mater., 26, 357-361. https://doi.org/10.1016/j.conbuildmat.2011.06.034
  33. Zhang, P, Liu, C.H., Li, Q.F., Zhang, T.H. and Wang, P. (2014), "Fracture properties of steel fibre reinforced high-performance concrete containing nano-$SiO_2$ and fly ash", Current Sci., 106(7), 980.

피인용 문헌

  1. Size and boundary effects on notch tensile strength and fracture properties of PMMA bone cement vol.59, 2017, https://doi.org/10.1016/j.polymertesting.2017.02.018
  2. The continuous-discontinuous Galerkin method applied to crack propagation vol.23, pp.4, 2015, https://doi.org/10.12989/cac.2019.23.4.235
  3. Effect of steel fibres and nano silica on fracture properties of medium strength concrete vol.7, pp.3, 2015, https://doi.org/10.12989/acc.2019.7.3.143
  4. Mechanical, durability and fracture properties of nano-modified FA/GGBS geopolymer mortar vol.72, pp.4, 2015, https://doi.org/10.1680/jmacr.18.00059
  5. Numerical Simulation on Size Effect of Fracture Toughness of Concrete Based on Mesomechanics vol.13, pp.6, 2015, https://doi.org/10.3390/ma13061370
  6. Effects of UEA and MgO expansive agents on fracture properties of concrete vol.263, pp.None, 2015, https://doi.org/10.1016/j.conbuildmat.2020.120245
  7. Effect of medium coarse aggregate on fracture properties of ultra high strength concrete vol.77, pp.1, 2015, https://doi.org/10.12989/sem.2021.77.1.103