Structural Engineering and Mechanics

  • 제54권6호
  • /
  • Pages.1111-1133
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Rebar corrosion effects on structural behavior of buildings

  • Yuksel, Isa (Department of Civil Engineering, Bursa Technical University)
  • 투고 : 2014.10.03
  • 심사 : 2015.03.26
  • 발행 : 2015.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Rebar corrosion in concrete is one of the main causes of reduction of service life of reinforced concrete buildings. This paper presents the influence of rebar corrosion on the structural behavior of reinforced concrete (RC) buildings subjected to strong earthquake ground motion. Different levels of rebar corrosion scenarios were applied on a typical four story RC frame. The deteriorated conditions as a result of these scenarios include loss in cross-sectional area and loss of mechanical properties of the reinforcement bars, loss in bond strength, and loss in concrete strength and its modulus of elasticity. Dynamic analyses of the frame with different corrosion scenarios are performed with selected strong earthquake ground motion records. The influences of degradation in both concrete and reinforcement on structural behavior are investigated by comparing the various parameters of the frame under different corrosion scenarios with respect to each other. The results show that the progressive deterioration of the frame due to rebar corrosion causes serious structural behavior changes such as change in failure mode. The intensity, propagation time, and extensity of rebar corrosion have very important effects on the level of degradation of steel and concrete, as well as on the earthquake behavior of the structure.

키워드

참고문헌

  1. Almusallam, A.A. (2001), "Effect of degree of corrosion on the properties of reinforcing steel bars", Constr. Build. Mater., 15(8), 361-368. https://doi.org/10.1016/S0950-0618(01)00009-5
  2. Almusallam, A.A., Al-Gahtani, A.S., Aziz, A.R., Dakhil, F.H. and Rasheeduzzafar. (1996), "Effect of reinforcement corrosion on flexural behaviour of concrete slabs", J. Mater. Civil Eng., 8(3), 123-127. https://doi.org/10.1061/(ASCE)0899-1561(1996)8:3(123)
  3. Apostolopoulos, C.A., Demis, S. and Papadakis, V.G. (2013), "Chloride-induced corrosion of steel reinforcement -mechanical performance and pit depth analysis", Constr. Build. Mater., 38(1), 139-146. https://doi.org/10.1016/j.conbuildmat.2012.07.087
  4. Apostolopoulos, C.A. and Papadakis, V.G. (2008), "Consequences of steel corrosion on the ductility properties of reinforcement bar", Constr. Build. Mater., 22(12), 2316-2324. https://doi.org/10.1016/j.conbuildmat.2007.10.006
  5. Auyeung, Y.B., Balaguru, P. and Chung, L. (2000), "Bond behavior of corroded reinforcement bars", ACI Mater. J., 97(2), 214-220.
  6. Bertagnoli, G., Mancini, G. and Tondolo, F. (2006), "Bond deterioration due to corrosion and actual bearing capacity", Proceedings of the 2nd International Congress, Session 15-Durability of Concrete Structures, Naples, June.
  7. Berto, L., Seatta, A., Simioni, P. and Vitaliani, R. (2008), "Nonlinear static analyses of RC frame structures: influence of corrosion on seismic response", Proceedings of the 8th. World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, June-July.
  8. Biondini, F. and Vergani, M. (2012), "Damage modeling and nonlinear analysis of concrete bridges under corrosion", 6th International Conference on Bridge Maintenance, Safety and Management (IABMAS), Stresa, July.
  9. Cabrera, J.G. (1996), "Deterioration of concrete due to reinforcement steel corrosion", Cemment Concrete Compos., 18(1), 47-59. https://doi.org/10.1016/0958-9465(95)00043-7
  10. Chung, L., Kim, J.J. and Seong, Y. (2008), "Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars", Cemment Concrete Compos., 30(7), 603-611. https://doi.org/10.1016/j.cemconcomp.2008.03.006
  11. Coronelli, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete Beams: Modeling guidelines", J. Struct. Eng., 130(8), 1214-1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
  12. Demis, S., Efstathiou, M.P. and Papadakis, V.G. (2014), "Computer-aided modelling of concrete service life", Cement Concrete Compos., 47, 9-18. https://doi.org/10.1016/j.cemconcomp.2013.11.004
  13. Demis, S., Pilakoutas, K. and Apostolopoulos, Ch. (2010), "Effect of corrosion on bond strength of steel and non-metallic reinforcement", Mater. Corros., 61(4), 328-331. https://doi.org/10.1002/maco.200905324
  14. Fang, C. (2006), "Bond strength of corroded reinforcement under cyclic loading", Mag. Concrete Res., 58(7), 437-446. https://doi.org/10.1680/macr.2006.58.7.437
  15. Fang, C.Q., Gylltoft, K., Lundgren, K. and Plos, M. (2006), "Effect of corrosion on bond in reinforced concrete under cyclic loading", Cement Concrete Res., 36(3), 548-555. https://doi.org/10.1016/j.cemconres.2005.11.019
  16. Ghandehari, M., Zulli, M. and Shah, S.P. (2000), "Influence of Corrosion on bond degradation in reinforced concrete", Proceedings of the ASCE Engineering Mechanics Conference, Austin, TX, May.
  17. Ghosh, J. and Padgett, J.E. (2012), "Impact of multiple component deterioration and exposure conditions on seismic vulnerability of concrete bridges", Earthq. Struct., 3(5), 649-673. https://doi.org/10.12989/eas.2012.3.5.649
  18. Gu, X.L., Zhang, W.P., Shang, D.F. and Wang, X.G., (2010), "Flexural behavior of corroded reinforced concrete beams", Earth and Space 2010: Engineering, Science, Construction, and Operations in Challenging Environments, Honolulu, March.
  19. Hanjari, K.Z. (2010), "Structural behaviour of deteriorated concrete structures", Ph.D. Dissertation, Chalmers University of Technology, Gothenburg.
  20. IDARC2D Version 7.0 (2009), A Program for the Inelastic Damage Analysis of Structures, Developed by A.M. Reinhorn, H. Roh, M. Sivaselvan, S.K. Kunnath, R.E. Valles, A. Madan, C. Li, R. Lobo and Y.J. Park, State University of New York.
  21. Imbsen Software System, (2001), "XTRACT-Cross Sectional analysis of components", Sacramento.
  22. Kato, E., Iwanami, M. and Yokota, H. (2006), "Deterioration in ductility of rc beams with corroded reinforcement", Proceedings of the 2nd International Congress, Session 15-Durability of Concrete Structures, Naples, June.
  23. Kivell, A., Palermo, A. and Scott, A. (2011a), "Effects of bond deterioration due to corrosion in reinforced concrete", Ninth Pacific Conference on Earthquake Engineering, Auckland, April.
  24. Kivell, A., Palermo, A. and Scott, A. (2011b), "Monotonic and cyclic bond testing of heavily corroded reinforcing high strength concrete", 9th International Symposium on High Performance Concrete, Christchurch, August.
  25. Kunnath, S.K., Reinhorn, A.M. and Lobo, R.F. (1992), "IDARC Version 3.0: A program for the Inelastic Damage Analysis of RC Structures", Report No. NCEER-92-0022, National Center for Earthquake Engineering Research, State University of New York at Buffalo, N.Y.
  26. Lee, H.S. and Cho, Y.S. (2009), "Evaluation of the mechanical properties of steel reinforcement embedded in concrete specimen as a function of the degree of reinforcement corrosion", Int. J. Fract., 157(1-2), 81-88. https://doi.org/10.1007/s10704-009-9334-7
  27. Lee, H.S., Noguchi, T. and Tomosawa, F. (2002), "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cemment Concrete Res., 32(8), 1313-1318. https://doi.org/10.1016/S0008-8846(02)00783-4
  28. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  29. Mangat, P.S. and Elgarf, M.S. (1999). "Flexural strength of concrete beams with corroding reinforcement." ACI Struct. J., 96(1), 149-158.
  30. Mohammed, T.U., Hamada, H. and Yamaji, T. (2004), "Concrete after 30 years of exposure-Part II: Chloride ingress and corrosion of steel bars", ACI Struct. J., 101(1), 13-18.
  31. O'Flaherty, F.J., Mangat, P.S. and Lambert, P. (2010), "Influence of steel reinforcement corrosion on the stiffness of simply supported concrete beams", IABMAS10: Proceedings of the fifth International IABMAS Conference, Philadelphia, July.
  32. Ou, Y.C., Tsai, L.L. and Chen, H.H. (2012), "Cyclic performance of large-scale corroded reinforced concrete beams", Earthq. Eng. Struct. Dyn., 41(4), 593-604. https://doi.org/10.1002/eqe.1145
  33. Palsson, R. and Mirza, M.S. (2002), "Mechanical response of corroded steel reinforcement of abandoned concrete bridge", ACI Struct. J., 99(2), 157-162.
  34. Park, Y.J., Ang, A.H.S. and Wen, Y.K. (1984), "Seismic damage analysis and damage-limiting design of r/c buildings, civil engineering studies", Technical Report No. SRS 516, University of Illionis, Urbana.
  35. Park, Y.J., Ang, A.H.S. and Wen, Y.K. (1987), "Damage-limiting aseismic design of buildings", Earthq. Spectra, 3(1), 1-26. https://doi.org/10.1193/1.1585416
  36. PEER (2014), Strong Motion Database, Website of the Pacific Earthquake Engineering Research Center, http://peer.berkeley.edu/peer_ground_motion_database/.
  37. Republic of Turkey Prime Ministry Disaster & Emergency Management Presidency Earthquake Department (2014), Website of the National Strong motion Observation Network, http://kyh.deprem.gov.tr/ftpe.htm.
  38. Revathy, J., Suguna, K. and Raghunath, P.N. (2009), "Effect of corrosion damage on the ductility performance of concrete columns", Am. J. Eng. Appl. Sci., 2(2), 324-327. https://doi.org/10.3844/ajeassp.2009.324.327
  39. Rodriquez, J., Ortega, L., Izquierdo, D. and Andrade, C. (2002), "Detailed assessment of concrete structures affected by reinforcement corrosion", First Fib Congress, Osaka, October.
  40. Rodriguez, J., Ortega, L.M. and Casal, J. (1997), "Load carrying capacity of concrete structures with corroded reinforcement", Constr. Build. Mater., 11(4), 239-248. https://doi.org/10.1016/S0950-0618(97)00043-3
  41. Sadjadi, R., Kianoush, M.R. and Talebi, S. (2007), "Seismic performance of reinforced concrete moment resisting frames", Eng. Struct., 29(9), 2365-2380. https://doi.org/10.1016/j.engstruct.2006.11.029
  42. Saito, Y., Oyado, M., Kanakubo, T. and Yamamoto, Y. (2007), "Structural performance of corroded RC column under uniaxial compression load", First International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading, Whistler, August.
  43. Tapan, M. and Aboutaha, R.S. (2011), "Effect of steel corrosion and loss of concrete cover on strength of deteriorated RC columns", Constr. Build. Mater., 25(5), 2596-2603. https://doi.org/10.1016/j.conbuildmat.2010.12.003
  44. TBC-500-(2000), Requirements for design and construction of reinforced concrete structures, Turkish Standards Institute (TSE), Ankara, Turkey. (in Turkish)
  45. TEC-2007-Turkish Earthquake-resistant Code, Specification for Buildings to Be Built in Seismic Zones, Ministry of Public Works And Settlement, Ankara, Turkey. (in Turkish)
  46. Torres-Acosta, A.A., Navarro-Gutierrez, S. and Teran-Guillen, J. (2007), "Residual flexure capacity of corroded reinforced concrete beams", Engineering Structures, 29(6), 1145-1152. https://doi.org/10.1016/j.engstruct.2006.07.018
  47. TS708 (2010), Steel for the reinforcement of concrete - Reinforcing steel, Turkish Standards Institute (TSE), Ankara, Turkey. (in Turkish)
  48. Tuutti, K. (1982) "Corrosion of steel in concrete", CBI research report no 4.82. Swedish Cement and Concrete Research Institute, Stockholm, Sweden.
  49. Wu, H. (2012), "Bond degradation and residual flexural capacity of corroded rc beams", Master Thesis, Ryerson University, Toronto.
  50. Yalciner, H., Sensoy, S. and Eren, O. (2012), "Effect of corrosion damage on the performance level of a 25-year-old reinforced concrete building", Shock Vib., 19(5), 891-902. https://doi.org/10.1155/2012/861509
  51. Ying, M., Yi, C. and Jinxin, G. (2012), "Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading", Constr. Build. Mater., 29(1), 548-556. https://doi.org/10.1016/j.conbuildmat.2011.11.002
  52. Yuksel, I. and Coskan, S. (2013), "Earthquake response of reinforced concrete frame structures subjected to rebar corrosion", Earthq. Struct., 5(3), 321-341. https://doi.org/10.12989/eas.2013.5.3.321

피인용 문헌

  1. Experimental and numerical study about seismic retrofitting of corrosion-damaged reinforced concrete columns of bridge using combination of FRP wrapping and steel profiles vol.30, pp.3, 2015, https://doi.org/10.12989/scs.2019.30.3.231
  2. Investigations on the behaviour of corrosion damaged gravity load designed beam-column sub-assemblages under reverse cyclic loading vol.16, pp.2, 2015, https://doi.org/10.12989/eas.2019.16.2.235
  3. Theoretical and practical models for shear strength of corroded reinforced concrete columns vol.79, pp.5, 2015, https://doi.org/10.12989/sem.2021.79.5.565