Membrane and Water Treatment

  • 제6권1호
  • /
  • Pages.15-26
  • /
  • 2015
  • /
  • 2005-8624(pISSN)
  • /
  • 2092-7037(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Design, fabrication, and performance analysis of a twisted hollow fibre membrane module configuration

  • Palmarin, Matthew J. (Department of Environmental Systems Engineering, University of Regina) ;
  • Young, Stephanie (Department of Environmental Systems Engineering, University of Regina) ;
  • Lee, Tsun Ho (Department of Environmental Systems Engineering, University of Regina)
  • 투고 : 2014.07.20
  • 심사 : 2014.11.17
  • 발행 : 2015.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

The compact structure and high-quality effluent of membrane bioreactors make them well-suited for decentralized greywater reclamation. However, the occurrence of membrane fouling continues to limit their effectiveness. To address this concern, a unique membrane module configuration was developed for use in a decentralized greywater treatment system. The module featured local aeration directly below a series of inclined membrane bundles, giving the overall module a twisted appearance compared to a module with vertically orientated fibres. The intent of this design was to increase the frequency and intensity of collisions between rising air bubbles and the membrane surface. Material related to the construction of custom-fit modules is rarely communicated. Therefore, detailed design and assembly procedures were provided in this paper. The twisted module was compared to two commercially available modules with diverse specifications in order to assess the relative performance and marketability of the twisted module with respect to existing products. Contaminant removal efficiencies were determined in terms of biochemical oxygen demand, chemical oxygen demand, ammonia, total nitrogen, total phosphorus, and turbidity for each module. Membrane fouling was monitored in terms of permeate flux, transmembrane pressure, and membrane resistance. Following 168 h of operation, the twisted module configuration demonstrated competitive performance, indicating good potential for further development and commercialization.

키워드

참고문헌

  1. APHA (2005), Standard Methods for the Examination of Water and Wastewater, (21th Edition), American Public Health Association/American Water Works Association / Water Environment Federation, Washington, D.C., USA.
  2. Allgeier, S., Alspach, B. and Vickers, J. (2005), Membrane Filtration Guidance Manual, US EPA, Cincinnati, OH, USA.
  3. Bouhabila, E.H., Aim, R.B. and Buisson, H. (1998), "Microfiltration of activated sludge using submerged membrane with air bubbling (application to wastewater treatment)", Desalination, 118(1-3), 315-322. https://doi.org/10.1016/S0011-9164(98)00156-8
  4. Broussous, L., Schmitz, P., Boisson, H., Prouzet, E. and Larbot, A. (2000), "Hydrodynamic aspects of filtration antifouling by helically corrugated membranes", Chem. Eng. Sci., 55(21), 5049-5057. https://doi.org/10.1016/S0009-2509(00)00126-3
  5. Chang, S., Fane, A.G. and Vigneswaran, S. (2002), "Experimental assessment of filtration of biomass with transverse and axial fibres", Chem. Eng. J., 87(1), 121-127. https://doi.org/10.1016/S1385-8947(01)00224-8
  6. Cheng, T.-W. (2002), "Influence of inclination on gas-sparged cross-flow ultrafiltration through an inorganic tubular membrane", J. Membr. Sci., 196(1), 103-110. https://doi.org/10.1016/S0376-7388(01)00584-1
  7. Cheng, T.-W. and Lee, Z.-W. (2008), "Effects of aeration and inclination on flux performance of submerged membrane filtration", Desalination, 234(1-3), 74-80. https://doi.org/10.1016/j.desal.2007.09.072
  8. Cheng, T.-W., Yeh, H.-M. and Wu, J.-H. (1999), "Effects of gas slugs and inclination angle on the ultrafiltration flux in tubular membrane module", J. Membr. Sci., 158(1-2), 223-234. https://doi.org/10.1016/S0376-7388(99)00013-7
  9. Choo, K.-H. and Lee, C.-H. (1996), "Membrane fouling mechanisms in the membrane-coupled anaerobic bioreactor", Water Res., 30(8), 1771-1780. https://doi.org/10.1016/0043-1354(96)00053-X
  10. Cui, Z.F., Chang, S. and Fane, A.G. (2003), "The use of gas bubbling to enhance membrane processes", J Membr. Sci., 221(1-2), 1-35. https://doi.org/10.1016/S0376-7388(03)00246-1
  11. Culfaz, P.Z., Haddad, M., Wessling, M. and Lammertink, R.G.H. (2011), "Fouling behavior of microstructured hollow fibers in cross-flow filtrations: Critical flux determination and direct visual observation of particle deposition", J. Membr. Sci., 372(1-2), 210-218. https://doi.org/10.1016/j.memsci.2011.02.002
  12. Drews, A. (2010), "Membrane fouling in membrane bioreactors - Characterisation, contradictions, cause and cures", J. Membr. Sci., 363(1-2), 1-28. https://doi.org/10.1016/j.memsci.2010.06.046
  13. Ghosh, R. (2006), "Enhancement of membrane permeability by gas-sparging in submerged hollow fibre ultrafiltration of macromolecular solutions: Role of module design", J. Membr. Sci., 274(1-2), 73-82. https://doi.org/10.1016/j.memsci.2005.08.002
  14. Gil, J.A., Tua, L., Rueda, A., Montano, B., Rodriguez, M. and Pratz, D. (2010), "Monitoring and analysis of the energy cost of an MBR", Desalination, 250(3), 997-1001. https://doi.org/10.1016/j.desal.2009.09.089
  15. Hong, S.P., Bae, T.H., Tak, T.M., Hong, S. and Randall, A. (2002), "Fouling control in activated sludge submerged hollow fiber membrane bioreactors", Desalination, 143(3), 219-228. https://doi.org/10.1016/S0011-9164(02)00260-6
  16. Jie, L., Liu, L., Yang, F., Liu, F. and Liu, Z. (2012), "The configuration and application of helical membrane modules in MBR", J. Membr. Sci., 392-393, 112-121. https://doi.org/10.1016/j.memsci.2011.12.011
  17. Judd, S. (2006), The MBR Book, Elsevier Ltd., Oxford, South East England, UK.
  18. Kim, J.-Y., Chang, I.-S., Park, H.-H., Kim, C.-Y., Kim, J.-B. and Oh, J.-H. (2008), "New configuration of a membrane bioreactor for effective control of membrane fouling and nutrients removal in wastewater treatment", Desalination, 230(1-3), 153-161. https://doi.org/10.1016/j.desal.2007.11.022
  19. Kwon, O., Yang, H., Choi, Y. and Noh, S. (2008), "Fouling control of a submerged membrane module (YEF) by filtration modes", Desalination, 234(1-3), 81-88. https://doi.org/10.1016/j.desal.2007.09.073
  20. Lee, T.H. and Young, S. (2012), "Effects of membrane orientation on permeate flux performance in a submerged membrane bioreactor", Membr. Water Treat., Int. J., 3(3), 141-149. https://doi.org/10.12989/mwt.2012.3.3.141
  21. Li, F., Wichmann, K. and Otterpohl, R. (2009a), "Review of the technological approaches for grey water treatment and reuses", Sci. Total Environ., 407(11), 3439-3449. https://doi.org/10.1016/j.scitotenv.2009.02.004
  22. Li, B., Ye, M., Yang, F. and Ma, H. (2009b), "Mathematical model analysis on the enhancement of aeration efficiency using ladder-type flat membrane module forms in the Submerged Membrane Bio-reactor (SMBR)", Sci. China Ser. E, 52(5), 1363-1373. https://doi.org/10.1007/s11431-008-0342-z
  23. Liao, B.Q., Bagley, D.M., Kraemer, H.E., Leppard, G.G. and Liss, S.N. (2004), "A review of biofouling and its control in membrane separation bioreactors", Water Environ. Res., 76(5), 425-436. https://doi.org/10.2175/106143004X151527
  24. Liu, L., Xu, X., Zhao, C. and Yang, F. (2010), "A new helical membrane module for increasing permeate flux", J. Membr. Sci., 360(1-2), 142-148. https://doi.org/10.1016/j.memsci.2010.05.014
  25. Marrot, B., Barrios-Martinez, A., Moulin, P. and Roche, N. (2004), "Industrial wastewater treatment in a membrane bioreactor: A review", Environ. Prog., 23(1), 59-68. https://doi.org/10.1002/ep.10001
  26. Meng, F., Zhang, H., Yang, F., Li, Y., Xiao, J. and Zhang, X. (2006), "Effect of filamentous bacteria on membrane fouling in submerged membrane bioreactor", J. Membr. Sci., 272(1-2), 161-168. https://doi.org/10.1016/j.memsci.2005.07.041
  27. Popovic, S. and Tekic, M.N. (2011), "Twisted tapes as turbulence promoters in the microfiltration of milk", J. Membr. Sci., 384(1-2), 97-106. https://doi.org/10.1016/j.memsci.2011.09.016
  28. Qaisrani, T.M. and Samhaber, W.M. (2011), "Impact of gas bubbling and backflushing on fouling control and membrane cleaning", Desalination, 266(1-3), 154-161. https://doi.org/10.1016/j.desal.2010.08.019
  29. Taha, T., Cheong, W.L., Field, R.W. and Cui, Z.F. (2006), "Gas-sparged ultrafiltration using horizontal and inclined tubular membranes - A CFD study", J. Membr. Sci., 279(1-2), 487-494. https://doi.org/10.1016/j.memsci.2005.12.063
  30. Young, S. and Munoz, A. (2012), Moving Bed Membrane Bioreactor, International, Patent No. WO 2012 / 019294 A1.
  31. Yu, K., Wen, X., Bu, Q. and Xia, H. (2003), "Critical flux enhancements with air sparging in axial hollow fibers cross-flow microfiltration of biologically treated wastewater", J. Membr. Sci., 224(1-2), 69-79. https://doi.org/10.1016/j.memsci.2003.07.001