References
- Lee, S.Y., Kim, B., Kim, S.D., Kim, G. & Hong, Y.S.., "Effect of Si doping on the wear properties of CrN coatings synthesized by unbalanced magnetron sputtering", Thin Soild Films, vol. 506-507, pp. 192-196, 2006 https://doi.org/10.1016/j.tsf.2005.08.027
- Hong, Y.S. & Lee, S.Y., "A comparative study of Cr-X-N(X=Zr,Si) coatings for the improvement of the low-speed torque efficiency of a hydraulic piston pump", Metals and Materials Int. Vol. 14, No. 1, pp. 33-40, 2008 https://doi.org/10.3365/met.mat.2008.02.033
- Murrenhoff, H., Piepenstock, U. and Torsten Kohmascher, T., "Analyzing losses in hydrostatic drives", Proc. of the 7th JFPS International Symposium on Fluid Power, pp. 103-108, 2008
- Hooke, C.J., Kakoullis, Y.P., " The lubrication of slippers on axial piston pumps", 5th international fluid power symposium, pp. 13-26, 1978
- Koc, E, Hooke, C.J., "Investigation into the effects of orifice size, offset and overclamp ratio on the lubrication of slipper bearings", Tribology International, vol. 29, No. 4, pp. 299-305, 1996 https://doi.org/10.1016/0301-679X(95)00044-5
- Bergada, J.M., Watton, J., Haynes, J.M., "The hydrostatic/hydrodynamic behavior of an axial piston pump slipper with multiple lands", Meccanica, vol. 45, pp. 585-602, 2010 https://doi.org/10.1007/s11012-009-9277-0
- Johnson, R.E., Manring, N.D., "Translating circular trust bearings", J. Fluid Mech., vol.530, pp. 197-212, 2005 https://doi.org/10.1017/S0022112005003782
- Schenk, A., Ivantysynova, M., "An Investigation of the impact of elastohydrodynamic deformation on power loss in the slipper swashplate interface", Proc. 8th JFPS Int. Symposium on Fluid Power, pp. 228-234, 2011
- Wieczorek, U., "Ein Simulationsmodell zur Beschreibung der Spaltstroemung in Axialkolbenmaschinen der Schraegscheibenbauart", Fortschritt-Berichte VDI-Verlag, Series 7, No. 443, 2003
- Boinghoff, O.,"Untersuchen zum Reibungsverhalten der Gleitschuhe in Schragscheiben-Axialkolbenmascinen", VDI-Forschungsheft, VDI-Verlag, vol. 584, 1977
- Hong, Y.S. & Kwon, Y.C., "Investigation of the power losses from hydrostatic piston shoe bearings for swash plate type axial piston pumps under mixed friction conditions", Int. J. Precision Engineering & Manufacturing, vol. 15, No. 11, pp. 2327-2333, 2014 https://doi.org/10.1007/s12541-014-0597-1
- Hong, Y.S., Kim, J.H. & Lee, S.L.," Performance Improvement of a swash plate type piston pump in the low-speed tange by DLC-coating", J. Korean Soc. Fluid Power Construction Equipments, vol. 11, No. 4, pp. 25-31, 2014