참고문헌
- ACI Committee 349 (2001) Code Requirements for Nuclear Safety Related Concrete Structures, ACI 349-01, Appendix B: Anchoring to concrete, American Concrete Institute.
- ACI Committee 318 (2002) Building Code Requirements for Structural Concrete and Commentary, ACI 318-02, Appendix D: Anchoring to concrete, American Concrete Institute.
- ETAG 001 (2013) Guideline for European Technical Approval of Metal Anchors for use in Concrete, European Organization for Technical Approvals (EOTA).
- ACI Committee 318 (2008) Building Code Requirements for Structural Concrete and Commentary, ACI 318-08, Appendix D: Anchoring to concrete, American Concrete Institute.
- ACI Committee 318 (2011) Building Code Requirements for Structural Concrete and Commentary, Appendix D: Anchoring to concrete, American Concrete Institute.
- Lee, N.H., Park, K.R., and Suh, Y.P. (2010) Shear Behavior of Headed Anchors with Large Diameters and Deep Embedments, ACI Structural Journal, Vol.107, No.4, pp.146-156.
- 한국콘크리트학회(2007) 콘크리트구조설계기준해설, 부록 IV 콘크리트용 앵커. Korean Concrete Institute (2007) Concrete Structure Design Code and Commentary, Appendix IV Anchoring to Concrete (in Korean).
- 한국콘크리트학회(2012) 콘크리트구조설계기준해설, 부록 II 콘크리트용 앵커. Korean Concrete Institute (2012) Concrete Structure Design Code and Commentary, Appendix II Anchoring to concrete (in Korean).
- Hallowell, J.M. (1996) Tensile and Shear Behavior of Anchors in Uncracked Concrete Under Static and Dynamic Loading, Master Thesis, The University of Texas at Austin.
- Klingner, R.E., Mendonca, J.A., and Malik, J.B. (1982) Effect of Reinforcing Details on the Shear Resistance of Short Anchor Bolts Under Reversed Cyclic Loading, ACI Journal, Vol.79, No.1, pp.3-12.
- Eligehausen, R., Mallee, R., and Silva, J. (2006) Anchorage in Concrete Construction, Ernst & Sohn.
- Eligehausen, R. and Hofmann, J. (2003) Experimental and Mumerical Investigation on Fixings Under Shear Loading Close to an Edge, Report, Institute of Construction Materials, University of Stuttgart (in German).
- 박용명, 전명희, 최명국, 김철환, 김인기(2012) 전단력을 받는 선설치 앵커볼트의 콘크리트 파열파괴강도 평가 연구, 한국강구조학회논문집, 한국강구조학회, 제24권, 제2호, pp.207-215. Park, Y.M., Jeon, M.H., Choi, M.K., Kim, C.H., and Kim, I.G. (2012) A Study on the Concrete Breakout Capacity of CIP Anchor Bolts Under Shear Loading, Journal of Korean Society of Steel Construction, KSSC, Vol.24, No.2, pp.207-215 (in Korean).
- 박용명, 강문기, 김동현, 이종한, 강충현(2014) 선설치앵커의 동적 전단하중에 대한 저항강도: 비보강 앵커, 한국강구조학회논문집, 한국강구조학회, 제26권, 제1호, pp.11-20. Park, Y.M., Kang, M.G., Kim, D.H., Lee, J.H., and Kang, C.H. (2014) Shear Resistance of CIP Anchors Under Dynamic Loading: Unreinforced Concrete, Journal of Korean Society of Steel Construction, KSSC, Vol.26, No.1, pp.11-20 (in Korean).
피인용 문헌
- 지진모의실험에 의한 비균열 및 균열콘크리트에 매입된 비보강 선설치앵커의 전단 저항강도 평가 vol.27, pp.3, 2015, https://doi.org/10.7781/kjoss.2015.27.3.347
- 비균열 콘크리트에 매립된 발전설비 정착부 선 설치 앵커의 구조성능 평가 vol.20, pp.11, 2015, https://doi.org/10.5762/kais.2019.20.11.250
- 균열 콘크리트에 매립된 발전설비 현장설치용 선 설치 앵커의 구조성능 평가 vol.23, pp.7, 2015, https://doi.org/10.11112/jksmi.2019.23.7.120