Cited by
- Leveraging 3D geometric knowledge in the product lifecycle based on industrial standards vol.5, pp.1, 2015, https://doi.org/10.1016/j.jcde.2017.11.002
Journal of Computational Design and Engineering
- Volume 2 Issue 4
- /
- Pages.253-260
- /
- 2015
- /
- 2288-4300(pISSN)
- /
- 2288-5048(eISSN)
DOI QR Code
An automatic 3D CAD model errors detection method of aircraft structural part for NC machining
- Huang, Bo (The Key Laboratory of Contemporary Designing and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University) ;
- Xu, Changhong (The Key Laboratory of Contemporary Designing and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University) ;
- Huang, Rui (The Key Laboratory of Contemporary Designing and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University) ;
- Zhang, Shusheng (The Key Laboratory of Contemporary Designing and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University)
- Received : 2015.03.31
- Accepted : 2015.06.14
- Published : 2015.10.01
Abstract
Feature-based NC machining, which requires high quality of 3D CAD model, is widely used in machining aircraft structural part. However, there has been little research on how to automatically detect the CAD model errors. As a result, the user has to manually check the errors with great effort before NC programming. This paper proposes an automatic CAD model errors detection approach for aircraft structural part. First, the base faces are identified based on the reference directions corresponding to machining coordinate systems. Then, the CAD models are partitioned into multiple local regions based on the base faces. Finally, the CAD model error types are evaluated based on the heuristic rules. A prototype system based on CATIA has been developed to verify the effectiveness of the proposed approach.