DOI QR코드

DOI QR Code

Predicting the compressive strength of cement mortars containing FA and SF by MLPNN

  • Kocak, Yilmaz (Department of Construction, Kutahya Vocational School of Technical Sciences, Dumlupinar University) ;
  • Gulbandilar, Eyyup (Department of Computer Engineering, Faculty of Engineering, Dumlupinar University) ;
  • Akcay, Muammer (Department of Computer Engineering, Faculty of Engineering, Dumlupinar University)
  • 투고 : 2014.11.20
  • 심사 : 2015.02.06
  • 발행 : 2015.05.25

초록

In this study, a multi-layer perceptron neural network (MLPNN) prediction model for compressive strength of the cement mortars has been developed. For purpose of constructing this model, 8 different mixes with 240 specimens of the 2, 7, 28, 56 and 90 days compressive strength experimental results of cement mortars containing fly ash (FA), silica fume (SF) and FA+SF used in training and testing for MLPNN system was gathered from the standard cement tests. The data used in the MLPNN model are arranged in a format of four input parameters that cover the FA, SF, FA+SF and age of samples and an output parameter which is compressive strength of cement mortars. In the model, the training and testing results have shown that MLPNN system has strong potential as a feasible tool for predicting 2, 7, 28, 56 and 90 days compressive strength of cement mortars.

키워드

참고문헌

  1. Adhikary, B.B. and Mutsuyoshi, H. (2006), "Prediction of shear strength of steel fiber RC beams using neural Networks", Constr. Build. Mater., 20(9), 801-811. https://doi.org/10.1016/j.conbuildmat.2005.01.047
  2. Ahmaruzzaman, M. (2010), "A review on the utilization of fly ash", Prog. Energ. Combust., 36(3), 327-363. https://doi.org/10.1016/j.pecs.2009.11.003
  3. Aruntas, H.Y. (2006), "The potential of fly ash usage in construction sector", J. Faculty of Eng. Arch. of Gazi University, 21(1), 193-203.
  4. Ashrafi, H.R., Jalal, M. and Garmsiri, K. (2010), "Prediction of load-displacement curve of concrete reinforced by composite fibers (steel and polymeric) using artificial neural network", Expert Syst. Appl., 37(12), 7663-7668. https://doi.org/10.1016/j.eswa.2010.04.076
  5. Atici, U. (2011), "Prediction of the strength of mineral admixture concrete using multivariable regression analysis and an artificial neural network", Expert Syst. Appl., 38(8), 9609-9618. https://doi.org/10.1016/j.eswa.2011.01.156
  6. Behnood, A. and Ziari, H. (2008), "Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures", Cement Concrete Comp., 30(2), 106-112. https://doi.org/10.1016/j.cemconcomp.2007.06.003
  7. Demir, F. (2008), "Prediction of elastic modulus of normal and high strength concrete by artificial neural network", Constr. Build. Mater., 22(7), 1428-1435. https://doi.org/10.1016/j.conbuildmat.2007.04.004
  8. Garces, P., Andion, L.G., Zornoza, E., Bonilla, M. and Paya, J. (2010), "The effect of processed fly ashes on the durability and the corrosion of steel rebars embedded in cement-modified fly ash mortars", Cement Concrete Comp., 32(3), 204-210. https://doi.org/10.1016/j.cemconcomp.2009.11.006
  9. Fu, X., Wang, Z., Tao, W., Yang, C., Hou, W., Dong, Y. and Wu, X. (2002), "Studies on blended cement with a large amount of fly ash", Cement Concrete Res., 32(7), 1153-1159. https://doi.org/10.1016/S0008-8846(02)00757-3
  10. Jo, B.W., Kim, C.H., Tae, G. and Park, J. B. (2007), "Characteristics of cement mortar with nano-$SiO_2$ particles", Constr. Build. Mater., 21(6), 1351-1355. https://doi.org/10.1016/j.conbuildmat.2005.12.020
  11. Kocak, Y. (2010), "A study on the effect of fly ash and silica fume substituted cement paste and mortars", Scientific Res. Essays, 5(9), 990-998.
  12. Maas, A.J., Ideker, J.H. and Juenger, M.C.G. (2007), "Alkali silica reactivity of agglomerated silica fume", Cement Concrete Res., 37(2), 166-174. https://doi.org/10.1016/j.cemconres.2006.10.011
  13. Neville, A.M. (2006), Proporties of concrete, Pearson Education limited, England.
  14. Nochaiya, T., Wongkeo, W. and Chaipanich, A. (2010), "Utilization of fly ash with silica fume and properties of Portland cement-fly ash-silica fume concrete", Fuel, 89, 768-774. https://doi.org/10.1016/j.fuel.2009.10.003
  15. Ozcan, F., Atis, C.D., Karahan, O., Uncuoglu, E. and Tanyildizi, H. (2009), "Comparison of artificial neural network and fuzzy logic models for prediction of long-term compressive strength of silica fume concrete", Adv. Eng. Softw., 40(9), 856-863. https://doi.org/10.1016/j.advengsoft.2009.01.005
  16. Parichatprecha, R. and Nimityongskul, P. (2009), "Analysis of durability of high performance concrete using artificial neural Networks", Constr. Build. Mater., 23(2), 910-917. https://doi.org/10.1016/j.conbuildmat.2008.04.015
  17. Qing, Y., Zenan, Z., Deyu, K. and Rongshen, C. (2007), "Influence of nano-$SiO_2$ addition on properties of hardened cement paste as compared with silica fume", Constr. Build. Mater., 21(3), 539-545. https://doi.org/10.1016/j.conbuildmat.2005.09.001
  18. Saraswathy, V., Muralidharan, S., Thangavel, K. and Srinivasan, S. (2003), "Influence of activated fly ash on corrosion-resistance and strength of concrete", Cement Concrete Comp,, 25(7), 673-680. https://doi.org/10.1016/S0958-9465(02)00068-9
  19. Saridemir, M. (2009), "Prediction of compressive strength of concretes containing metakaolin and silica fume by artificial neural network", Adv. Eng. Softw., 40(5), 350-355. https://doi.org/10.1016/j.advengsoft.2008.05.002
  20. Song H.W., Pack S.W., Nam S.H., Jong J.C. and Saraswathy, V. (2010), "Estimation of the permeability of silica fume cement concrete", Constr. Build. Mater., 24(3), 315-321. https://doi.org/10.1016/j.conbuildmat.2009.08.033
  21. Subasi, S. (2009), "Prediction of mechanical properties of cement containing class C fly ash by using artificial neural network and regression technique", Scientific Res. Essay, 4(4), 289-297.
  22. Topcu, I.B., Karakurt, C. and Saridemir, M. (2008), "Predicting the strength development of cements produced with different pozzolans by neural network and fuzzy logic", Mater. Design, 29(10), 1986-1991. https://doi.org/10.1016/j.matdes.2008.04.005
  23. Topcu, I.B. and Saridemir, M. (2008), "Prediction of compressive strength of concrete containing fly ash using artificial neural networks and fuzzy logic", Comp. Mater. Sci., 41(3), 305-311. https://doi.org/10.1016/j.commatsci.2007.04.009
  24. Topcu, I.B., Saridemir, M., Ozcan, F. and Severcan, M.H. (2009), "Prediction of long-term effects of GGBFS on compressive strength of concrete by artificial neural networks and fuzzy logic", Constr. Build. Mater., 23(3), 1279-1286. https://doi.org/10.1016/j.conbuildmat.2008.07.021
  25. Trtnik, G., Kavcic, F. and Turk, G. (2009), "Prediction of concrete strength using ultrasonic pulse velocity and artificial neural Networks", Ultrasonics, 49(1), 53-60. https://doi.org/10.1016/j.ultras.2008.05.001
  26. Wang, S., Liamazos, E., Baxter, L., Topcu, I.B., Karakurt, C., Saridemir, M. and Fonseca, F. (2008), "Durability of biomass fly ash concrete: Freezing and thawing and rapid chloride permeability tests", Fuel, 87(3), 359-364. https://doi.org/10.1016/j.fuel.2007.05.027
  27. Worrell, E., Martin, N. and Price, L. (2000), "Potentials for energy efficiency improvement in the US cement industry", Energy, 25(12), 1189-1214. https://doi.org/10.1016/S0360-5442(00)00042-6
  28. Yaprak, H., Karaci, A. and Demir, I. (2013), "Prediction of the effect of varying cure conditions and w/c ratio on the compressive strength of concrete using artificial neural networks", Neural Compt. Appl., 22(1), 133-141.

피인용 문헌

  1. Failure estimation of the composite laminates using machine learning techniques vol.25, pp.6, 2015, https://doi.org/10.12989/scs.2017.25.6.663