Smart Structures and Systems

  • 제15권5호
  • /
  • Pages.1373-1392
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Health monitoring sensor placement optimization for Canton Tower using virus monkey algorithm

  • Yi, Ting-Hua (School of Civil Engineering, Dalian University of Technology) ;
  • Li, Hong-Nan (School of Civil Engineering, Dalian University of Technology) ;
  • Zhang, Xu-Dong (School of Civil Engineering, Dalian University of Technology)
  • 투고 : 2013.05.23
  • 심사 : 2014.09.23
  • 발행 : 2015.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Placing sensors at appropriate locations is an important task in the design of an efficient structural health monitoring (SHM) system for a large-scale civil structure. In this paper, a hybrid optimization algorithm called virus monkey algorithm (VMA) based on the virus theory of evolution is proposed to seek the optimal placement of sensors. Firstly, the dual-structure coding method is adopted instead of binary coding method to code the solution. Then, the VMA is designed to incorporate two populations, a monkey population and a virus population, enabling the horizontal propagation between the monkey and virus individuals and the vertical inheritance of monkey's position information from the previous to following position. Correspondingly, the monkey population in this paper is divided into the superior and inferior monkey populations, and the virus population is divided into the serious and slight virus populations. The serious virus is used to infect the inferior monkey to make it escape from the local optima, while the slight virus is adopted to infect the superior monkey to let it find a better result in the nearby area. This kind of novel virus infection operator enables the coevolution of monkey and virus populations. Finally, the effectiveness of the proposed VMA is demonstrated by designing the sensor network of the Canton Tower, the tallest TV Tower in China. Results show that innovations in the VMA proposed in this paper can improve the convergence of algorithm compared with the original monkey algorithm (MA).

키워드

참고문헌

  1. Abdullah, M.M., Richardson, A. and Hanif, J. (2001), "Placement of sensors/actuators on civil structures using genetic algorithms", Earthq. Eng. Struct. D., 30(8), 1167-1184. https://doi.org/10.1002/eqe.57
  2. Anderson, N. (1970), "Evolutionary significant of virus infection", Nature, 227(5265), 1346-1347. https://doi.org/10.1038/2271346a0
  3. ANSYS, ANSYS, Inc. Canonsburg, PA (USA), http://www.ansys.com.
  4. Carne, T.G. and Dohmann, C.R. (1995), "A modal test design strategy for modal correlation", Proceedings of the 13th International Modal Analysis Conference, Schenectady, New York, USA, February.
  5. Chang, F.K. and Markmiller, J.F.C. (2006), "A new look in design of intelligent structures with SHM", Proceedings of the 3rd European Workshop: Structural Health Monitoring, Granada, Spain, July.
  6. Chow, H.M., Lam, H.F., Yin, T. and Au, S.K. (2010), "Optimal sensor configuration of a typical transmission tower for the purpose of structural model updating", Struct. Control Health., 18(3), 305-320.
  7. Chung, Y.T. and Moore, J.D. (1993), "On-orbit sensor placement and system identification of space station with limited instrumentations", Proceedings of the 11th International Modal Analysis Conference, Kissimmee, Florida, USA, February.
  8. Cortes, P., Onieva, L., Munuzuri, J. and Guadix, J. (2013), "A viral system algorithm to optimize the car dispatching in elevator group control systems of tall buildings", Comput. Ind. Eng., 64(1), 403-411. https://doi.org/10.1016/j.cie.2012.11.002
  9. Dutta, R., Ganguli, R. and Mani, V. (2011), "Swarm intelligence algorithms for integrated optimization of piezoelectric actuator and sensor placement and feedback gains", Smart Mater. Struct., 20(10), 1-14.
  10. Fidanova, S., Marinov, P. and Alba, E. (2012), "Ant algorithm for optimal sensor deployment", Comput. Intell., 399, 21-29.
  11. Guo, H.Y., Zhang, L, Zhang, L.L. and Zhou, J.X. (2004), "Optimal placement of sensors for structural health monitoring using improved genetic algorithms", Smart Mater. Struct., 13(3), 528-534. https://doi.org/10.1088/0964-1726/13/3/011
  12. Kammer, D.C. (1991), "Sensor placement for on-orbit modal identification and correlation of large space structures", J. Guid. Control Dynam., 14(2), 251-259. https://doi.org/10.2514/3.20635
  13. Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  14. Li, D.S., Li, H.N. and Fritzec, C.P. (2007), "The connection between effective independence and modal kinetic energy methods for sensor placement", J. Sound Vib., 305(4-5), 945-955. https://doi.org/10.1016/j.jsv.2007.05.004
  15. Li, D.S., Li, H.N. and Fritzec, C.P. (2009), "A note on fast computation of effective independence through QR downdating for sensor placement", Mech. Syst. Signal Pr., 23(4), 1160-1168. https://doi.org/10.1016/j.ymssp.2008.09.007
  16. Li, D.S., Li, H.N. and Fritzec, C.P.T. (2012), "Load dependent sensor placement method: Theory and experimental validation", Mech. Syst. Signal Pr., 31(1), 217-227. https://doi.org/10.1016/j.ymssp.2012.04.014
  17. Lim, K.B. (1992), "Method for optimal actuator and sensor placement for large flexible structures", J. Guid. Control Dynam., 15(1), 49-57. https://doi.org/10.2514/3.20800
  18. Limongelli, M.P. (2003), "Optimal location of sensors for reconstruction of seismic responses through spline function interpolation", Earthq. Eng. Struct. D., 32(7), 1055-1074. https://doi.org/10.1002/eqe.262
  19. Liu, W., Gao, W.C., Sun, Y. and Xu, M.J. (2008), "Optimal sensor placement for spatial lattice structure based on genetic algorithms", J. Sound Vib., 317(1-2), 175-189. https://doi.org/10.1016/j.jsv.2008.03.026
  20. MATLAB, The MathWorks, Inc. Natwick, MA (USA), http://www.mathworks.com.
  21. Meo, M. and Zumpano, G. (2005), "On the optimal sensor placement techniques for a bridge structure", Eng. Struct., 27(10), 1488-1497. https://doi.org/10.1016/j.engstruct.2005.03.015
  22. Mini, S., Udgata, S.K. and Sabat, S.L. (2011), "Sensor deployment for probabilistic target k-coverage using artificial bee colony algorithm", Proceedings of the 2nd International conference on Swarm, Evolutionary, and Memetic Computing, Andhra Pradesh, India, December.
  23. Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct. Control Health., 16(1), 73-98. https://doi.org/10.1002/stc.303
  24. Ni, Y.Q., Xia, Y., Lin, W., Chen, W.H. and Ko, J.M. (2012), "SHM benchmark for high-rise structures: a reduced-order finite element model and field measurement data", Smart Mater. Struct., 9(6), 411-426. https://doi.org/10.12989/sss.2012.9.5.411
  25. Papadimitriou, C. (2004), "Optimal sensor placement methodology for parametric identification of structural systems", J. Sound Vib., 278(4-5), 923-947. https://doi.org/10.1016/j.jsv.2003.10.063
  26. Roy, T. and Chakraborty, D. (2009), "Optimal vibration control of smart fiber reinforced composite shell structures using improved genetic algorithm", J. Sound Vib., 319(1-2), 15-40. https://doi.org/10.1016/j.jsv.2008.05.037
  27. Salama, M., Rose, T. and Garba, J. (1987), "Optimal placement of excitations and sensors for verification of large dynamical systems", Proceedings of the 28th Structures, Structural Dynamics, and Materials Conference, Monterey, California, USA, April.
  28. Stubbs, N. and Park, S. (1996), "Optimal sensor placement for mode shapes via Shannon's sampling theorem", Comput.- Aided Civ. Inf., 11(6), 411-419. https://doi.org/10.1111/j.1467-8667.1996.tb00353.x
  29. Wenzel, H. (2009), Health monitoring of bridges, USA, John Wiley and Sons Ltd.
  30. Yi, T.H. and Li, H.N. (2012), "Methodology developments in sensor placement for health monitoring of civil infrastructures", Int. J. Distrib. Sens. N., Article ID 612726, 1-11.
  31. Yi, T.H., Li, H.N. and Gu, M. (2011a), "Optimal sensor placement for health monitoring of high-rise structure based on genetic algorithm", Math. Probl. Eng., Article ID 395101, 1-11.
  32. Yi, T.H., Li, H.N. and Gu, M. (2011b), "Optimal sensor placement for structural health monitoring based on multiple optimization strategies", Struct. Des. Tall Spec., 20(7), 881-900. https://doi.org/10.1002/tal.712
  33. Yi, T.H., Li, H.N. and Zhang, X.D. (2012a), "A modified monkey algorithm for optimal sensor placement in structural health monitoring", Smart Mater. Struct., 21(10), 1-9.
  34. Yi, T.H., Li, H.N. and Zhang, X.D. (2012b), "Sensor placement on Canton Tower for health monitoring using asynchronous-climbing monkey algorithm", Smart Mater. Struct., 21(12), 1-13.
  35. Zhao, R.Q. and Tang, W.S. (2008), "Monkey algorithm for global numerical optimization", J. Uncer. Syst., 2(3), 165-176.

피인용 문헌

  1. Optimization of the selective catalytic reduction structure of a vehicle based on the improvement in the uniformity of the nitrogen oxides distribution vol.232, pp.2, 2018, https://doi.org/10.1177/0954407017694276
  2. Multi-objective colliding bodies optimization algorithm for design of trusses vol.6, pp.1, 2015, https://doi.org/10.1016/j.jcde.2018.04.001
  3. Computational methodologies for optimal sensor placement in structural health monitoring: A review vol.19, pp.4, 2015, https://doi.org/10.1177/1475921719877579
  4. A hybrid identification method on butterfly optimization and differential evolution algorithm vol.26, pp.3, 2015, https://doi.org/10.12989/sss.2020.26.3.345