Smart Structures and Systems

  • 제15권5호
  • /
  • Pages.1203-1214
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Force identification by using specific forms of PVDF patches

  • 투고 : 2013.10.08
  • 심사 : 2014.02.09
  • 발행 : 2015.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the experimental validation of the use of PVDF Patches for the assessment of spatial derivatives of displacement field. It focuses more exactly on the shear Force Identification by using Specific forms of PVDF patcHes (FISH) on beams. An overview of the theoretical approach is exposed. The principle is based on the use of the weak form of the equation of motion of the beam which allows the shear forces to be extracted at one edge of the sensor when this last has a specific form. The experimental validation is carried out with a cantilever steel beam, excited by a shaker at its free boundary. The validation consists in comparing the shear force measured by the designed sensor glued at the free edge and the directly measured force applied by the shaker. The sensor is made of two patches, called the "stiffness" patch and the "mass" patch. The use of both patches allows one to identify correctly the shear force on a large frequency domain. The use of only the stiffness patch is valid in the low frequency domain and has the advantage to have a frequency-independent gain that allows its use in real time.

키워드

참고문헌

  1. Ablitzer, F., Pezerat, C. and Genevaux, J.M. (2012), "Identification of the damping ratio of multi-layered composite panels from the verification of their local equation of motion", Proceedings of the Vibrations, Shock and Noise, Clamart, France.
  2. Chesne, S., Pezerat, C. and Guyader, J.L. (2006), "Identification of boundary forces in beams from measured displacements", J. Vib. Acoust., 128(6), 757-771. https://doi.org/10.1115/1.2202171
  3. Chesne, S., Pezerat, C. and Guyader, J.L. (2008), "Identification of plate boundary forces from measured displacements", J. Vib. Acoust., 130(4), 041006-1. https://doi.org/10.1115/1.2890398
  4. Chesne, S. and Pezerat, C. (2011), "Distributed piezoelectric sensors for boundary force measurements in Euler Bernoulli beams." Smart Mater. Struct.20, 075009, 1-9.
  5. Chochol, C., Chesne, S. and Remond, D. (2013), "An original differentiation tool for identification on continuous structures", J. Sound Vib., 332(13), 3338-3350. https://doi.org/10.1016/j.jsv.2013.01.022
  6. Clark, R.L. and Burke, S.E. (1996), "Practical limitations in achieving shaped modal sensors with induced strain materials", J. Vib. Acoust., 118(4), 668-675. https://doi.org/10.1115/1.2888350
  7. Francois, A., De Man, P. and Preumont, A. (2001), "Piezoelectric array sensing of volume displacement: a hardware demonstration", J. Sound Vib., 244(3), 395-405. https://doi.org/10.1006/jsvi.2000.3483
  8. Friswell, M.I. (2001), "On the design of modal actuators and sensor", J. Sound Vib., 241(3), 361-372. https://doi.org/10.1006/jsvi.2000.3300
  9. Gavric, L. and Pavic, G. (1993), "Finite element method for computation of structural intensity by normal mode approach", J. Sound Vib., 164(1), 29-43. https://doi.org/10.1006/jsvi.1993.1194
  10. Gawronski, W. (2000), "Modal actuators and sensors", J. Sound Vib., 229(4), 1013-1022. https://doi.org/10.1006/jsvi.1999.2499
  11. Grediac M. (1989), "Principe des travauxvirtuels et identification [principle of virtual work and identification", Comptes Rendus de l'Academie des Sciences, 309(1-5), In French with abridged English version.
  12. Gu, Y., Clark, R.L., Fuller, C.R. and Zander, A.C. (1994), "Experiments on active control of plate vibration using piezoelectric actuators and polyvinylidene fluoride (pvdf) modal sensor", J. Vib. Acoust., 116(3), 303-308. https://doi.org/10.1115/1.2930429
  13. Guyader, J.L. (2002), Vibration in Continuous Media, Wiley-Blackwell, ISTE, Chippenham, England.
  14. Hubbard, J.E. (2010), Spatial Filtering for the Control of Smart Structures, Springer-Verlag Berlin Heidelberg..
  15. Leclere, Q. and Pezerat, C. (2012), "Vibration source identification using corrected finite difference schemes", J. Sound Vib., 331(6), 1366-1377. https://doi.org/10.1016/j.jsv.2011.11.002
  16. Lee, C.K. and Moon, F.C. (1990), "Modal Sensors/actuators", J. Appl. Mech. -T ASME, 57, 434-441. https://doi.org/10.1115/1.2892008
  17. Noiseux, D.U. (1970), "Measurement of power flow in uniform beams and plates", J. Acoust. Soc. Am., 47(18), 238-247. https://doi.org/10.1121/1.1911472
  18. Pavic, G. (1976), "Measurement of structure borne wave intensity, Part I: Formulation of the methods", J. Sound Vib., 49(2), 221-230. https://doi.org/10.1016/0022-460X(76)90498-3
  19. Pezerat, C. and Guyader, J.L. (1995), "Two inverse methods for localization of external source exciting a beam", Acta Acustica, 1(3), 1-10.
  20. Pezerat, C. and Guyader, J.L. (2000), "Force analysis technique: Reconstruction of force distribution on plates", Acta Acustica, 86(2), 322-332.
  21. Pierron, F. and Grediac, M. (2012), The Virtual Fields Method, Springer, New-York.
  22. Preumont, A., Francois, A., De Man, P. and Piefort, V. (2003), "Spatial filters in structural control", J. Sound Vib., 265(1), 61-79. https://doi.org/10.1016/S0022-460X(02)01440-2
  23. Xu, H., Cheng, L., Su, Z. and Guyader, J.L. (2011), "Identification of structuraldamage based on locally perturbed dynamic equilibrium with an application tobeam component", J. Sound Vib., 330, 5963-5981. https://doi.org/10.1016/j.jsv.2011.07.028
  24. Zhang, Y. and Adin Mann, J., III, (1999), "Measuring the structural intensity and force distribution in plates", J. Acoust. Soc. Am., 99(1), 345-361. https://doi.org/10.1121/1.414546

피인용 문헌

  1. Design of distributed piezoelectric modal sensor for a rotating beam with elastic boundary restraints vol.26, pp.23, 2015, https://doi.org/10.1177/1077546320923460