Smart Structures and Systems

  • 제15권5호
  • /
  • Pages.1177-1202
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimal control and design of composite laminated piezoelectric plates

  • ALamir, ALhadi E. (Department of Mathematics, Najran university)
  • 투고 : 2013.05.10
  • 심사 : 2013.12.10
  • 발행 : 2015.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present paper is concerned with the optimal control and/or design of symmetric and antisymmetric composite laminate with two piezoelectric layers bonded to the opposite surfaces of the laminate, and placed symmetrically with respect to the middle plane. For the optimal control problem, Liapunov-Bellman theory is used to minimize the dynamic response of the laminate. The dynamic response of the laminate comprises a weight sum of the control objective (the total vibrational energy) and a penalty functional including the control force. Simultaneously with the active control, thicknesses and the orientation angles of layers are taken as design variables to achieve optimum design. The formulation is based on various plate theories for various boundary conditions. Explicit solutions for the control function and controlled deflections are obtained in forms of double series. Numerical results are given to demonstrate the effectiveness of the proposed control and design mechanism, and to investigate the effects of various laminate parameters on the control and design process.

키워드

참고문헌

  1. Behjat, B. and Khoshravan, M.R. (2012), "Nonlinear analysis of functionally graded laminates considering piezoelectric effect", J. Mech. Sci. Technol., 26(8), 2581-2588. https://doi.org/10.1007/s12206-012-0638-6
  2. Fares, M.E., Youssif, Y.G. and Alamir, A.E. (2002), "Optimal design and control of composite laminated plates with various boundary conditions using various plate theories", Compos. Struct., 56(1), 1-12. https://doi.org/10.1016/S0263-8223(01)00179-9
  3. Foda, M.A. and Alsaif, K.A. (2012), "Vibration mitigation of composite laminated satellite solar panels using distributed piezoelectric patches", Smart Struct. Syst., 10(2), 111-130. https://doi.org/10.12989/sss.2012.10.2.111
  4. Frecker M.I. (2002), "A review of current research activities in optimization of smart structures and actuators", Smart Struct. Mater., 4693, 112-123.
  5. Gabralyan, M.S. (1975), "About stabilization of mechanical systems under continuous forces", YGU Yervan, 2, 47-56.
  6. Gupta, V., Sharma, M. and Thakur, N. (2011), "Mathematical modeling of actively controlled piezo smart structures: a review", Smart Struct. Syst., 8(3), 275-302. https://doi.org/10.12989/sss.2011.8.3.275
  7. Kapuria, S., Kumari, P. and Nath, J.K. (2010), "Efficient modeling of smart piezoelectric composite laminates: a review", Acta. Mech., 214, 31-48. https://doi.org/10.1007/s00707-010-0310-0
  8. Kapuria, S. and Yaqoob, M. (2013), "Active vibration control of smart plates using directional actuation and sensing capability of piezoelectric composites", Acta. Mech., 224(6), 1185-1199. https://doi.org/10.1007/s00707-013-0864-8
  9. Khdeir, A.A. and Aldraihem, O.J. (2013), "Analytical investigation of laminated arches with extension and shear piezoelectric actuators", Eur. J. Mech. A - Solids, 37, 185-192. https://doi.org/10.1016/j.euromechsol.2012.06.009
  10. Molter, A., da Silveira, O.A.A., Fonseca, J.S.O. and Bottega, V. (2010), "Simultaneous piezoelectric actuator and sensor placement optimization and control design of manipulators with flexible links using SDRE method", Math. Probl. Eng., 2010, 1-23.
  11. Nanda, N. and Nath, Y. (2012), "Active control of delaminated composite shells with piezoelectric sensor/actuator patches", Struct. Eng. Mech., 42(2), 211-228. https://doi.org/10.12989/sem.2012.42.2.211
  12. Narwal, K. and Chhabra, D. (2012), "Analysis of simple supported plate for active vibration control with piezoelectric sensors and actuators", J. Mech. Civil. Eng., 1(1), 26-39. https://doi.org/10.9790/1684-0112639
  13. Padula, S.L. and Kincaid, R.K. (1999), Optimization strategies for sensor and actuator placement, NASA/TM-1999-209126, NASA, Langley Research Center.
  14. Qiu, Z.C., Zhang, X.M., Wu, H.X. and Zhang, HH. (2007), "Optimal placement and active vibration control for piezoelectric smart flexible cantilever plate", J. Sound Vib., 301, 521-543. https://doi.org/10.1016/j.jsv.2006.10.018
  15. Reece, P.L. (2007), Smart Materials And Structures: new research, Nova Science Publishers, New York, USA.
  16. Sadek, I., Kucuk, I., Zeini, E. and Adali, S. (2009), "Optimal boundary control of dynamics responses of piezo actuating micro-beams", Appl. Math. Model., 33, 3343-3353. https://doi.org/10.1016/j.apm.2008.11.009
  17. Wang, J., Ding, G. and Qin, Y. (2007), Optimal Shape Control of Multilayered Piezoelectric Smart Plate Structure, Springer, Berlin, Germany.
  18. Wang, J.Z., Wang, X.M. and Zhou, Y.H. (2012), "A wavelet approach for active-passive vibration control of laminated plates", Acta Mech Sinica, 28(2), 520-531. https://doi.org/10.1007/s10409-012-0045-3
  19. Xu, B., Ou, J.P. and Jiang, J.S. (2013), "Integrated optimization of structural topology and control for piezoelectric smart plate based on genetic algorithm", Finite Elem. Anal. Des., 64, 1-12. https://doi.org/10.1016/j.finel.2012.09.004
  20. Zoric, N.D., Simonovic, A.M., Mitrovic, Z.S. and Stupar, S.N. (2013), "Optimal vibration control of smart composite beams with optimal size and location of piezoelectric sensing and actuation", J. Intel. Mat. Syst. Str., 24 (4), 499-526. https://doi.org/10.1177/1045389X12463465

피인용 문헌

  1. SDRE controller considering Multi Observer applied to nonlinear IPMC model vol.20, pp.1, 2015, https://doi.org/10.12989/sss.2017.20.1.001