Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical analysis on the welding residual stress and fracture toughness of the heavy thick steel welded joints by welding processes

  • Bang, HanSur (Department of Welding and Joining Science Engineering, Chosun University) ;
  • Bang, HeeSeon (Department of Welding and Joining Science Engineering, Chosun University)
  • Received : 2014.10.07
  • Accepted : 2015.04.13
  • Published : 2015.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study examined the welding residual stress and fracture toughness of 78mm thick steel electro gas welding (EGW) and flux cored arc welding (FCAW) welded joints by numerical analyses of the thermal elasto-plastic behavior and fracture toughness(KIC). The residual stress, fracture toughness characteristics and production mechanism on the welded joints were clarified. Moreover, the effects of the welding process (EGW and FCAW) on the welding residual stresses and fracture toughness of welded joints were evaluated. The results showed that the new welding process (EGW) appears to be an effective substitute for the existing welding process (FCAW) in a thick steel plate with high strength.

Keywords

References

  1. Kim, C. G., A Study on the Trend and its limitation of building large container ship to reduce the logistics cost. The Korean Association of Shipping and Logistics, (2002)
  2. Minagawa, M, Ishida, K. et al., 390 MPa Yield Strength Steel Plate for Large Heat-input Welding for Large Container Ships. Nippon Steel Technical Report. 90 (2004), 7-10
  3. Kim, C. M., Lee, J. B., Choo, W.Y., Characteristics of single pass welds in 50kJ/mm of heavy thickness shipbuilding steel. Proceedings of the Thirteenth International Offshore and Polar Engineering Conference. (2003)
  4. Jeong, H. C., Park, Y. H., An Y. H., Lee, J. B., Mechanical properties and micro structures of high heat input welded tandem EGW joint in EH36-TM Steel. The Korea welding and joining society.25 (2007)
  5. Inoue, T., Ishkawa, T. et al., Long Crack Arrestability of Heavy-thick Shipbuilding steels. Proceedings of the Eighteenth International Offshore and Polar Engineering Conference. (2008), 132-136
  6. Bang, H. S., Study on the mechanical behavior of welded part in thick plate three-dimensional thermal elasto-platic analysis based on finite element method. Journal of the Korean Welding Society. 10 (1992), 37-43
  7. Kim, Y. C., Yamakita, T., Bang, H. S., Ueda. Y., Mechanical behavior on welding residual stress relief annealing of repair welding in thick plate. Q.J. Japan Weld. Society. 6 (1988), 53-59 https://doi.org/10.2207/qjjws.6.53
  8. Ueda, Y., Kim, Y. C., Garatani, K., Yamakita, T., Bang, H. S., Mechanical characteristics of repair welds thick plate-distributions of three-dimensional welding residual stresses and plastic strains and their production mechanisms, JWRI. 15 (1986), 359-368
  9. Bang, H. S. , Kim, S. J., et al, Study on lamellar tearing generated by corner joint welding in box column of ultra thick plate. Science and Technology of Welding & Joining. 6 (2001), 213-219 https://doi.org/10.1179/136217101101538794