DOI QR코드

DOI QR Code

Damage detection and localization on a benchmark cable-stayed bridge

  • Domaneschi, Marco (Department of Civil and Environmental Engineering, Politecnico di Milano) ;
  • Limongelli, Maria Pina (Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano) ;
  • Martinelli, Luca (Department of Civil and Environmental Engineering, Politecnico di Milano)
  • 투고 : 2014.08.08
  • 심사 : 2014.11.11
  • 발행 : 2015.05.25

초록

A damage localization algorithm based on Operational Deformed Shapes and known as Interpolation Damage Detection Method, is herein applied to the finite element model of a cable stayed bridge for detecting and localizing damages in the stays and the supporting steel beams under the bridge deck. Frequency Response Functions have been calculated basing on the responses of the bridge model to low intensity seismic excitations and used to recover the Operational Deformed Shapes both in the transversal and in the vertical direction. The analyses have been carried in the undamaged configuration and repeated in several different damaged configurations. Results show that the method is able to detect the damage and its correct location, provided an accurate estimation of the Operational Deformed Shapes is available. Furthermore, the damage detection algorithm results effective also when damages coexist at the same time at several location of the cable-stayed bridge members.

키워드

참고문헌

  1. ANSYS Rel. 14.0 (2014), Ansys Inc., Canonsburg PA, US.
  2. Bhagwat, M., Sasmal, S., Novak, B. and Upadhyay, A. (2011), "Investigations on seismic response of two span cable-stayed bridges", Earthq. Struct., 2(4), 337-356. https://doi.org/10.12989/eas.2011.2.4.337
  3. Bocchini, P. and Frangopol, D. (2012), "Optimal resilience and cost-based post disaster intervention prioritization for bridges along a highway segment", J. Bridge Eng., ASCE, 17(1), 117-129. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000201
  4. Caicedo, J.M. and Dyke, S.J. (2005), "Experimental validation of structural health monitoring for flexible bridge structures", Sturct. Control Hlth. Monit., 12(3-4), 425-443. https://doi.org/10.1002/stc.78
  5. Caicedo, J.M., Dyke, S.J., Moon, S.J., Bergman, L.A., Turan, G. and Hague, S. (2003), "Phase II benchmark control problem for seismic response of cable-stayed bridges", J. Struct. Control, 10(3-4), 137-168. https://doi.org/10.1002/stc.23
  6. Deco, A., Bocchini, P. and Frangopol, D. (2013), "A probabilistic approach for the prediction of seismic resilience of bridges", Earthq. Eng. Struct. Dyn, 42(10), 1469-1487. https://doi.org/10.1002/eqe.2282
  7. Dilena, M., Limongelli, M.P. and Morassi, A. (2015), "Damage localization in bridges via FRF interpolation method", Mech. Syst. Signal Pr., 52-53, 162-180. https://doi.org/10.1016/j.ymssp.2014.08.014
  8. Domaneschi, M. (2010), "Feasible control solutions of the ASCE benchmark cable-stayed bridge", Struct. Control Hlth. Monit., 17(6), 675-693.
  9. Domaneschi, M. and Martinelli, L. (2012), "Performance comparison of passive control schemes for the numerically improved ASCE cable-stayed bridge model", Earthq. Struct., 3(2), 181-201. https://doi.org/10.12989/eas.2012.3.2.181
  10. Domaneschi, M. and Martinelli, L. (2014), "Extending the benchmark cable-stayed bridge for transverse response under seismic loading", J. Bridge Eng., 19(3), art. no. 4013003.
  11. Domaneschi, M., Limongelli, M.P. and Martinelli, L. (2013a), "Vibration based damage localization using MEMS on a suspension bridge model", Smart Struct. Syst., 12(6), 679-694. https://doi.org/10.12989/sss.2013.12.6.679
  12. Domaneschi, M., Limongelli, M.P. and Martinelli, L. (2013b), "Multi-site damage localization in a suspension bridge via aftershock monitorino", Ingegneria Sismica, 30(3), 56-72.
  13. Hua, X.G., Ni, Y.Q., Chen, Z.Q. and Ko, J.M. (2009), "Structural damage detection of cable-stayed bridges using changes in cable forces and model updating", Struct. Eng., ASCE, 135(9), 1093-1106. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:9(1093)
  14. Ismail, M., Rodellar, J., Carusone, G.., Domaneschi, M. and Martinelli, L. (2013), "Characterization, modeling and assessment of Roll-N-Cage isolator using the cable-stayed bridge benchmark", ACTA Mech., 224(3), 525-547. https://doi.org/10.1007/s00707-012-0771-4
  15. Liao, W.H., Wang, D.H. and Huang, S.L. (2001), "Wireless monitoring of cable tension of cable-stayed bridges using PVDF Piezoelectric films", J. Intell Mater. Syst. Struct., 12(5), 331-339. https://doi.org/10.1106/AVHK-TLR4-6PTQ-QGXY
  16. Limongelli, M.P. (2003), "Optimal location of sensors for reconstruction of seismic responses through spline function interpolation", Earthq. Eng. Struct. Dyn., 32(7), 1055-1074. https://doi.org/10.1002/eqe.262
  17. Limongelli, M.P. (2010), "Frequency response function interpolation for damage detection under changing environment", Mech. Syst. Signal. Pr., doi:10.1016/j.ymssp.2010.03.004.
  18. Limongelli, M.P. (2011), "The interpolation damage detection method for frames under seismic excitation", J. Sound Vib., 330(22), 5474-5489. https://doi.org/10.1016/j.jsv.2011.06.012
  19. Limongelli, M.P. (2013), "Two dimensional damage localization using the interpolation method", Key Eng. Mater., 569, 860-867.
  20. Macdonald, J.H.G. and Daniell, W.E. (2005), "Variation of modal parameters of a cable-stayed bridge identified from ambient vibration measurements and FE modeling", Eng. Struct., 27(13), 1916-1930. https://doi.org/10.1016/j.engstruct.2005.06.007
  21. Mehrabi, A.B. (2006), "In-service evaluation of cable-stayed bridges, overview of available methods, and findings", J. Bridge Eng., 11(6), 716-724. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:6(716)
  22. Miyashita, T. and Nagai, M. (2008), "Vibration-based structural health monitoring for bridges using laser doppler vibrometers and MEMS-based technologies", Int. J. Steel Struct., 8(4), 325-331.
  23. Mordini, A., Savov, K. and Wenzel, H. (2008), "Damage detection on stay cables using an open sourcebased framework for finite element model updating", Struct. Hlth. Monit., 7(2), 91-102. https://doi.org/10.1177/1475921708089550
  24. Ni, Y.Q., Zhou, H.F., Chan, K.C. and Ko, J.M. (2008), "Modal flexibility analysis of cable-stayed Ting Kau bridge for damage identification", Comput. Aid. Civil Inf. Eng., 23(3), 223-236. https://doi.org/10.1111/j.1467-8667.2008.00521.x
  25. Phares, B., Lu, P., Wipf, T., Greimann, L. and Seo, J. (2013a), "Evolution of a bridge damage-detection algorithm", Trans. Res. Rec., 2331(1), 71-80. https://doi.org/10.3141/2331-07
  26. Phares, B., Lu, P., Wipf, T., Greimann, L. and Seo, J. (2013b), "Field Validation of a Statistical-Based Bridge Damage-Detection Algorithm", J. Bridge Eng., 18(11), 1227-1238. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000467
  27. Ren, W.X., Peng, X.L. and Lin, Y.Q. (2005), "Experimental and analytical studies on dynamic characteristics of a large span cable-stayed bridge", Eng. Struct., 27(4), 535-548. https://doi.org/10.1016/j.engstruct.2004.11.013
  28. Ren, W.X., Lin, Y.Q. and Peng, X.L. (2007), "Field load tests and numerical analysis of Qingzhou cablestayed bridge", J. Bridge Eng., 12(2), 261-270. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:2(261)
  29. Seo, J., Phares, B., Lu, P., Wipf, T. and Dahlberg, J. (2013), "Bridge rating protocol using ambient trucks through structural health monitoring system", Eng. Struct., 46, 569-580. https://doi.org/10.1016/j.engstruct.2012.08.012
  30. Venkittaraman, A. and Banerjee, S. (2014), "Enhancing resilience of highway bridges through seismic retrofit", Earthq. Eng. Struct. Dyn., 43(8), 1173-1191. https://doi.org/10.1002/eqe.2392
  31. Wang, D.H., Liu, J.S., Zhou, D.G. and Huang, S.L. (1999), "Using PVDF Piezoelectric Film sensors for In Situ Measurement of stayed-cable tension of cable-stayed bridges", Smart Mater. Struct., 8(5), 554-559. https://doi.org/10.1088/0964-1726/8/5/305
  32. Watson, C., Watson, T. and Coleman, R. (2007), "Structural monitoring of cable-stayed bridge: Analysis of GPS versus modeled deflections", J. Surv. Eng., 133(1), 23-28. https://doi.org/10.1061/(ASCE)0733-9453(2007)133:1(23)

피인용 문헌

  1. Structural Damage Localization by the Principal Eigenvector of Modal Flexibility Change vol.9, pp.4, 2016, https://doi.org/10.3390/a9020024
  2. Highway Bridge Infrastructure in the Province of British Columbia (BC), Canada vol.2, pp.2, 2017, https://doi.org/10.3390/infrastructures2020007
  3. A new method to identify bridge bearing damage based on Radial Basis Function Neural Network vol.11, pp.5, 2016, https://doi.org/10.12989/eas.2016.11.5.841
  4. Diagnosis of instant and long-term damages in cable-stayed bridges based on the variation of cable forces 2018, https://doi.org/10.1080/15732479.2017.1375962
  5. Existing concrete dams: loads definition and finite element models validation vol.3, pp.2, 2016, https://doi.org/10.12989/smm.2016.3.2.129
  6. Structural Behavior of a Long-Span Partially Earth-Anchored Cable-Stayed Bridge during Installation of a Key Segment by Thermal Prestressing vol.6, pp.12, 2016, https://doi.org/10.3390/app6080231
  7. The modal surface interpolation method for damage localization vol.842, 2017, https://doi.org/10.1088/1742-6596/842/1/012004
  8. A Rapidly Convergent Empirical Mode Decomposition Method for Analyzing the Environmental Temperature Effects on Stay Cable Force vol.33, pp.8, 2018, https://doi.org/10.1111/mice.12355
  9. Longitudinal Seismic Response of Continuously Welded Track on Railway Arch Bridges vol.8, pp.5, 2018, https://doi.org/10.3390/app8050775
  10. Vibration Mitigation of Suspension Bridge Suspender Cables Using a Ring-Shaped Tuned Liquid Damper vol.24, pp.4, 2019, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001372
  11. Structural damage detection using a parked vehicle induced frequency variation vol.170, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2018.05.082
  12. Output-only modal identification by in-operation modal appropriation for use with enhanced frequency domain decomposition method vol.33, pp.7, 2015, https://doi.org/10.1007/s12206-018-0906-1
  13. State-of-the-Art Review on Determining Prestress Losses in Prestressed Concrete Girders vol.10, pp.20, 2020, https://doi.org/10.3390/app10207257
  14. Development of a Novel Damage Detection Framework for Truss Railway Bridges Using Operational Acceleration and Strain Response vol.4, pp.2, 2021, https://doi.org/10.3390/vibration4020028
  15. Bridge load testing and damage evaluation using model updating method vol.252, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2021.113648