자원리싸이클링 (Resources Recycling)

  • 제24권2호
  • /
  • Pages.55-61
  • /
  • 2015
  • /
  • 2765-3439(pISSN)
  • /
  • 2765-3447(eISSN)
한국자원리싸이클링학회 (The Korean Institute of Resources Recycling)
권호 표지
DOI QR코드

DOI QR Code

전처리 공정에 따른 폐타이어 재생 고무분말의 특성연구

A study on the Characteristic of Waste Ground Rubber Tire Powders with Pre-treatment Process for Recycling

  • 박종문 (금오공과대학교 신소재공학부) ;
  • 안주영 (금오공과대학교 신소재공학부) ;
  • 박진의 (금오공과대학교 신소재공학부) ;
  • 방대석 (금오공과대학교 에너지융합소재공학부) ;
  • 김봉석 ((주)씽크루트) ;
  • 오명훈 (금오공과대학교 신소재공학부)
  • Park, Jongmoon (Department of Materials Science and Engineering, Kumoh National Institute of Technology) ;
  • An, Ju-Young (Department of Materials Science and Engineering, Kumoh National Institute of Technology) ;
  • Park, Jin-Eui (Department of Materials Science and Engineering, Kumoh National Institute of Technology) ;
  • Bang, DaeSuk (Department of Polymer Science and Engineering, Kumoh National Institute of Technology) ;
  • Kim, Bong-Suk (Thinker route Co., LTD.) ;
  • Oh, Myung-Hoon (Department of Materials Science and Engineering, Kumoh National Institute of Technology)
  • 투고 : 2015.03.25
  • 심사 : 2015.04.09
  • 발행 : 2015.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 폐타이어 재활용을 위하여 수행된 전처리 공정이 재생 고무분말의 기계적 물성에 미치는 영향을 조사하는 것을 목적으로 하였다. 이를 위하여 분쇄 및 탈황공정을 통하여 생산된 폐타이어 고무분말을 재가황한 후 인장시험, 충격시험 및 파단면 관찰을 수행하였다. 분쇄 공정을 거쳐서 생산된 고무분말은 입자크기가 작아질수록 그 표면적이 증가되며 인장강도와 연신율이 모두 증가되었다. 반면에 탈황공정을 거친 고무분말은 내부에 존재하는 황과의 가교결합이 줄어들어서 이후의 가황처리 후에도 인장강도와 연신율이 모두 증가되었다. 따라서 폐타이어 재활용을 위한 전처리 공정은 재활용 분말을 일정크기로 분쇄한 후 탈황공정까지를 수행한 고무분말을 제조하는 것이 단순 분쇄공정만을 거친 재활용 고무분말에 비하여 가황 시에 연신율을 보다 효율적으로 증가시킬 수 있음을 확인하였다.

In this study, mechanical properties of waste ground rubber tire powder were investigated to evaluate the influence of pre-treatment process for recycling. The tensile test, fracture test and morphology observation were carried out using various kinds of waste ground tire powders, which were produced by grinding and devulcanization process, respectively. As a results, it was found that the produced rubber powder through grinding process increased its tensile strength and elongation with decreasing particle size because of decreasing surface area. Devulcanized rubber powder also increased its tensile strength and elongation by de-crosslink with sulfur. It could be also suggested that devulcanization treatment after grinding process was more efficient recycling process for both increasing tensile property and fracture elongation of waste ground rubber tire powders.

키워드

참고문헌

  1. Adhikari, B and Maiti, D. De, S., 2000 : Reclamation and recycling of waste rubber, Prog. Polym. Sci. 25(7), pp. 909-948. https://doi.org/10.1016/S0079-6700(00)00020-4
  2. Rorres, A., Chomon, M. J. and Caballero, B., 2001 : Pyrolysis of scrap tyres. Fuel Process. Technol, 72, pp. 9-22. https://doi.org/10.1016/S0378-3820(01)00174-6
  3. Jang, J. W., Yoo, T. S., Oh, J. H. and Iwasaki, I., 1998 : Discarded tire recycling practices in United States, Japn and Korea resoures. Conserv. Recycl, 22, pp. 1-14. https://doi.org/10.1016/S0921-3449(97)00041-4
  4. 한국자원재생공사 1998 : 폐타이어 재생처리시설현황
  5. Lee, J. Y., 2007 : Recycling of Waste Rubber, Korean Industrial Chemistry Nesws, 10(3), pp. 42-49.
  6. Kim, J. K., 1993 : Waste Tire recycling technique, Gyeongsang National University, pp. 205-211.
  7. Kim, J. K., et al., 2003 : A Study on Recycling Technology of Waste Tire Powder by Particle Size Distribution Analysis, Elastomer, 38(2), pp. 128-138.
  8. Kim, J. K., et al., 2003 : A Study on Surface Modification of Waste Rubber Tire(I), J. of Korean Inst. of Resources Recycling, 12(2), pp. 28-35.
  9. Cho, H. N and Kim J. K., 1996 : Effect of the Curing Conditions on the Recycling of the Scrap Waste Tire, Journal of the Korea Institute of Rubber Industry, 31(2), pp. 95-103.
  10. Hwang, S. H., 2004 : A Study on Utilization of Waste Tire by Fine Powder Processing and Modification of Molecule Structure, Gyeongsang National University, section2, pp. 1-26.
  11. Paul. S and Chattopadhyay. A.B., 1995 : Effect of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding steels, Cryogenics, 35(8), pp. 515-523. https://doi.org/10.1016/0011-2275(95)98219-Q
  12. Harrison, K., Tong, S. G and Hilyard, N. C 1986 : An economic evaluation of cryogenic-grinding of scrap automotive tyres, Conservation & Recycling, 9(1), pp. 1-14. https://doi.org/10.1016/0361-3658(86)90128-1
  13. Wilczek, M., Bertling, J and Hintemann, D., 2004 : Optimised technologies for cryogenic grinding, International Journal of Mineral Processing, 74, S425-S434. https://doi.org/10.1016/j.minpro.2004.07.032
  14. De-Link Bulletin 1. 1995 : De-Link recycling system, all you want to know. Kuala Lumpur, STI-K Polymers Sdn. pp. 69-92.
  15. Schocke, D., Arastoopour, H and Bernstein, B., 1999 : Pulverization of rubber under high compression and shear, Powder technology, 102(3), pp. 207-214. https://doi.org/10.1016/S0032-5910(98)00213-7
  16. Bauman, B. D, 1974 : Surface-modified rubber particles in PU. Rubber Plast. News 23, pp. 56-58.
  17. Seo, K. H., Lim, J. C and Lim, H. S., 2000 : Effect of Ground Rubber on Mechanical Properties of EPDM Foam, Elastomer, 35(2), pp. 132-137.
  18. Park, J. W., Roh, H. S., Kim, J. K. and Joe, Y. I., 1997 : Studies on Microbial Treatment for Recycling of Waste Tire, Journal of the Korea Institute of Rubber Industry, 32(5), pp. 325-329.
  19. Levin, V. T., Kim, S. H. and Isayev, A. I., 1997 : Effect of crosslink type on the ultrasound devulcanization of SBR vulcanizates, Rubber Chemical Technology, 70, pp. 641-649. https://doi.org/10.5254/1.3538450
  20. Park, J. M., An, J. Y., Bang, D. S., Kim, B. S and Oh, M. H., 2014 : Characteristics Studies of Waste Tire Rubber Powders using the Different Grinding Methods, J. of Korean Inst. of Resources Recycling, 23(3), pp. 44-50. https://doi.org/10.7844/KIRR.2014.23.3.44
  21. An, J. Y., Park, J. M., Bang, D. S., Kim, B. S and Oh, M. H., 2014 : Characteristics of Thermo-Plastic Vulcanized (TPV) Composite Prepared by the Waste Tire and Plastic Powder, J. of Korean Inst. of Resources Recycling, 23(4), pp. 30-36. https://doi.org/10.7844/kirr.2014.23.4.30
  22. Park, C H., 2009 : Devulcanization Method for Wasted Tire, 10-0926346-0000(KR)
  23. Kim, B. S., 2015 : private communication with Thinker route Co. Ltd.