Fire Science and Engineering (한국화재소방학회논문지)

Korean Institute of Fire Science and Engineering (한국화재소방학회)
권호 표지
DOI QR코드

DOI QR Code

Appropriateness of MSDS by Means of the Measurement of Combustible Properties of Anisole

아니솔의 연소특성치의 측정에 의한 MSDS의 적정성

  • Ha, Dong-Myeong (Dept. of Occupational Health and Safety Engineering, Semyung University)
  • 하동명 (세명대학교 보건안전공학과)
  • Received : 2015.02.09
  • Accepted : 2015.04.01
  • Published : 2015.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

For the safe handling of anisole, this study was investigated the explosion limits of anisole in the reference data. The flash points and auto-ignition temperatures (AITs) by ignition delay time were experimented. The lower flash points of Anisole by using closed-cup tester were experimented in $39^{\circ}C$ and $42^{\circ}C$. The lower flash points of Anisole by using open cup tester were experimented in $50^{\circ}C$ and $54^{\circ}C$. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 tester for Anisole. The AIT of Anisole was experimented as $390^{\circ}C$. The lower explosion limit (LEL) by the measured the lower flash point for Anisole were calculated as 1.07 Vol%.

아니솔의 안전한 취급을 위해, 폭발한계는 문헌을 통해 고찰하였고, 인화점과 발화지연시간에 의한 발화온도를 측정하였다. 그 결과, 밀폐식 장치에 의한 아니솔의 하부인화점은 $39^{\circ}C$와 $42^{\circ}C$로 측정되었으며, 개방식에서는 $50^{\circ}C$와 $54^{\circ}C$로 측정되었다. ASTM E659 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 아니솔의 최소자연발화온도는 $390^{\circ}C$로 측정되었다. 측정된 하부인화점에 의한 폭발하한계는 1.07 Vol%로 계산되었다.

Keywords

References

  1. D. A. Crowl and J. F. Louvar, "Chemical Process Safety Fundamentals with Application", 2nd ed., Pearson Education Inc. (2002).
  2. F. P. Lees, "Loss Prevention in the Process Industries", Vol. 2, 2nd ed., Butterworth-Heinemann (1996).
  3. KOSHA, /www.kosha.or.kr/msds/msdsMain.do?menuId=69.
  4. D. R. Lide, "Handbook Chemistry and Physics", 76th ed., CRC Press (1996).
  5. R. H. Perry and D. W. Green, "Perry's Chemical Engineers' Handbook", 7th ed., McGraw-Hill (1997).
  6. NFPA, "Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids", NFPA 325M, NFPA (1991).
  7. R. J. Lewis, "SAX's Dangerous Properties of Industrial Materials", 11th ed., John Wiley & Son, Inc., N.J. (2004).
  8. V. Babrauskas, "Ignition Handbook", Fire Science Publishers, SFPE (2003).
  9. R. M. Stephson, "Flash Points of Organic and Orgarnometallic Compounds," Elsevier Science Publishing Co. Inc. (1987).
  10. D. M. Ha, "Risk Assessment by means of Measurement of Combustible Characteristics for n-Noanol", J. of the Korean Institute of Fire Sci. & Eng., Vol. 26, No. 2, pp. 84-89 (2012).
  11. D. M. Ha, "The Measurement of Fire and Explosion Properties of n-Pentadecane", J. of the Korean Society of Safety, Vol. 28, No. 4, pp. 53-57 (2013). https://doi.org/10.14346/JKOSOS.2013.28.4.053
  12. T. E. Vittal Prasad, R. Deshmukh, A. Kuman and D. H. L. Prasad, "(Vapor + liquid) Equilibrium of Binary Mixtures Formed by N,N.-Dimethyl formamide with Some Compounds at 95.1 kPa", Fluid Phase Equilibria, Vol. 245, pp. 11-17 (2007).
  13. D. M. Ha, "The Evaluation of Hazard by Measurement of Combustible Characteristics of n-Tetradecane", J. of the Korean Society of Safety, Vol. 27, No. 5, pp. 70-76 (2012). https://doi.org/10.14346/JKOSOS.2012.27.5.070
  14. N. N. Semenov, "Some Problems in Chemical Kinetics and Reactivity, Vol. 2", Princeton University Press, Princeton, N.J. (1959).