DOI QR코드

DOI QR Code

Damage Detection of Beam Member Based on POM Curvature Extracted from Measured FRF Data

계측된 FRF 데이터로부터 추출된 POM 곡률의 평균값에 근거한 보 구조물의 손상탐지

  • Received : 2014.12.22
  • Accepted : 2015.03.16
  • Published : 2015.04.30

Abstract

This work presents an analytical method for detecting damage of flexural beam member without the baseline data at intact state. Utilizing FRF (frequency response function) data collected in the neighborhood of the resonance frequency, the POV (proper orthogonal value) and the corresponding POM (proper orthogonal mode) are extracted to use as a damage detection index. It is observed from the POM curvature curve that the damage coincides with the location to represent the abrupt change of the curve. The validity of the proposed method is illustrated in a numerical experiment. The sensitivity of the proposed method depending on the measurement data contaminated by the external noise, the resonance frequency region to collect the FRF data and the selected POV is investigated in a numerical experiment.

Keywords

Acknowledgement

Supported by : 한국연구재단, 강원대학교

References

  1. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W., "Damage identification and health monitoring of structural systems from changes in their vibration charteristics: A literature review." Report No. LA-12767-MS, Los Alamos National Laboratory, 1996.
  2. Doebling, S.W., Peterson, L.D. and Alvin, K.F., "Experimental determination of local structural stiffness by disassembly of measured flexibility matrices." Journal of Vibration and Acoustics, Vol. 120, 949-957, 1998. https://doi.org/10.1115/1.2893925
  3. Pandey, A.K., Biswas, M. and Samman, M.M., "Damage detection from changes in curvature mode shapes." Journal of Sound and Vibration, Vol. 145, 321-332, 1991. https://doi.org/10.1016/0022-460X(91)90595-B
  4. Maia, N.M.M., Silva, J.M.M., Almas, E.A.M. and Sampaio, R.P.C., "Damage detection in structures: From mode shape to frequency response function methods." Mechanical Systems and Signal Processing, Vol. 17, 489-498, 2003. https://doi.org/10.1006/mssp.2002.1506
  5. Sampaio, R.P.C., Maia, N.M.M. and Silva, J.M.M., "Damage detection using the frequency response function curvature method." Journal of Sound and Vibration, Vol. 226, 1029-1042, 1999. https://doi.org/10.1006/jsvi.1999.2340
  6. Park, N.G. and Park, Y.S., "Damage detection using spatially incomplete frequency response functions." Mechanical Systems and Signal Processing, Vol. 17, 519-532, 2003. https://doi.org/10.1006/mssp.2001.1423
  7. De Boe, P. and Golinval, J.C., "Principal component analysis of a piezo-sensor array for damage localization." Structural Health Monitoring, Vol. 2, 137-144, 2003. https://doi.org/10.1177/1475921703002002005
  8. Feldmann, U., Kreuzer, E. and Pinto, F., "Dynamic diagnosis of railway tracks by means of the Karhunen-Loeve transformation." Nonlinear Dynamics, Vol. 22, 193-203, 2000.
  9. Shane, C. and Jha, R., "Proper orthogonal decomposition based on algorithm for detecting damage location and severity in composite beams." Mechanical Systems and Signal Processing, Vol. 25, 1062-1072, 2011. https://doi.org/10.1016/j.ymssp.2010.08.015
  10. Lanata, F. and Del Grossor, A., "Damage detection and localization for continuous static monitoring of structures using a proper orthogonal decomposition of signals." Smart Materials and Structures, Vol. 15, 1811-1829, 2006. https://doi.org/10.1088/0964-1726/15/6/036
  11. Ruotolo, R. and Surace, C., "Using SVD to detect damage in structures with different operational conditions." Journal of Sound and Vibration, Vol. 226, 425-439, 1999. https://doi.org/10.1006/jsvi.1999.2305
  12. Lenaerts, V., Kerschen, G. and Golinval, J.C., "Proper orthogonal decomposition for model updating of non-linear mechanical systems." Mechanical Systems and Signal Processing, Vol. 15, 31-43, 2001. https://doi.org/10.1006/mssp.2000.1350
  13. Galvanetto, U. and Violaris, G., "Numerical investigation of a new damage detection method based on proper orthogonal decomposition." Mechanical Systems and Signal Processing, Vol. 21, 1346-1361, 2007. https://doi.org/10.1016/j.ymssp.2005.12.007
  14. Serker, N.H.M.K. and Wu. Z., "A non-baseline damage identification method based on the static strain response." ICME07-AM-66, 2007.
  15. Rucevskis, S., Wesolowski, M. and Chate, A., "Vibration-based damage detection in a beam structure with multiple damage locations." Aviation, Vol. 13, 61-71. 2009. https://doi.org/10.3846/1648-7788.2009.13.61-71
  16. Ratcliffe, C.P. and Bagaria, W.J., "A vibration technique for locating delamination in a composite beam." AIAA Journal, Vol. 36, 1074-1077, 1998. https://doi.org/10.2514/2.482
  17. Ratcliffe, C.P., "A frequency and curvature based experimental method for locating damage in structures." Journal of Vibration and Acoustics, Vol. 122, 324-329, 2000. https://doi.org/10.1115/1.1303121
  18. Yoon, M.K., Heider, D., Gillespie, J.W., Ratcliffe, C.P. and Crane, R.M,: "Local damage detection with the global fitting method using operating deflection shape data." Journal of Nondestructive Evaluation, Vol. 29, 25-37, 2009.
  19. Kim, J.B., Lee, E.T., Rahmatalla, S. and Eun, H.C., "Non-baseline damage detection based on the deviation of displacement mode shape data," Journal of Nondestructive Evaluation, Vol. 32, 14-24, 2013. https://doi.org/10.1007/s10921-012-0154-8