Journal of Institute of Convergence Technology (융복합기술연구소 논문집)
- Volume 5 Issue 1
- /
- Pages.7-12
- /
- 2015
- /
- 2233-8667(pISSN)
DOI QR Code
Experimental Study on the Forming Limit Curve of Aluminum Alloy Sheets using Digital Image Correlation
디지털 이미지 상관관계를 이용한 알루미늄 합금 판재의 성형한계도 평가
- Kim, Yongbae (Metal Forming R&D Group, Research Institute of Advanced Manufacturing Technology, Korea Institute of Industrial Technology) ;
- Park, Jungsoo (Metal Forming R&D Group, Research Institute of Advanced Manufacturing Technology, Korea Institute of Industrial Technology) ;
- Song, Junghan (Metal Forming R&D Group, Research Institute of Advanced Manufacturing Technology, Korea Institute of Industrial Technology)
- 김용배 (한국생산기술연구원 뿌리산업기술연구소 성형기술그룹) ;
- 박정수 (한국생산기술연구원 뿌리산업기술연구소 성형기술그룹) ;
- 송정한 (한국생산기술연구원 뿌리산업기술연구소 성형기술그룹)
- Received : 2015.04.06
- Accepted : 2015.05.01
- Published : 2015.05.31
Abstract
Sheet metal formability can be defined as the ability of metal to deform without necking or fracture into desired shape. Every sheet metal can be deformed without failure only up to a certain limit, which is normally known as forming limit curve(FLC). In this paper, the dome stretching tests and tensile tests have been performed to obtain forming limit curve of aluminum alloy. During the experiment, failure strain is measured using digital image correlation(DIC) method. DIC method is a whole-field measurement technique that acquires surface displacements and strains from images information which characterized a random speckle as intensity grey levels. Recently years, this DIC method is being developed and used increasingly in various research. DIC results demonstrated the usefulness and ability to determine a strain.
Keywords
- Forming limit curve;
- Digital image correlation;
- Aluminum alloy;
- Dome stretching test;
- Sheet metal forming