참고문헌
- P. Marshall, Austenitic Stainless steels, Microstructure and Properties, Elsevier, London (1984).
- O. K. Chopar and W. J. Shack, NUREG/CR-6909, ANL-06/08, U.S. NRC (2007).
- H. Cho, B. K. Kim, I. S. Kim, C. Jang and D. Jung, Adv. Mater. Res., 26-28, 1121 (2007). https://doi.org/10.4028/www.scientific.net/AMR.26-28.1121
- H. Cho, Ph. D. Thesis, KAIST, Daejeon (2007).
- Jean L. Smith and O. K. Chopar, ANL/ET/CP-98400, U.S. NRC (1999).
- Jean L. Smith, O. K. Chopra, ASME/JSME Joint Pressure vessel and piping Conference, San Diego (1998).
- O. K. Chopra, NUREG/CR-6787, ANL-01/25, U.S. NRC (2002).
- ASTM E 8-05, Annual Book of ASTM Standards, ASTM International, USA (2011).
- ASTM E 647-05, Annual Book of ASTM Standards, ASTM International, USA (2005).
- S. G. Hong and S. B. Lee, J. Kor. Inst. Met. Mater., 43, 87 (2005).
- Sarata Cisse, Lydia Laffont, Benoit Tanguy, Marie-Christine Lafont and Eric Nadrieu, Corrosion Science, 56, 209 (2012). https://doi.org/10.1016/j.corsci.2011.12.007
- J. F. Moulder and Eden Prairie, Handbook of X-ray Photoelectron Spectroscopy, Physical Electronics Inc, USA (1995).
- Zahida Begum, A. Poonguzhali, Ranita Basu, C. Sudha, H. Shaikh and R. V. Subba Rao, Corrosion Science, 53, 1424 (2011). https://doi.org/10.1016/j.corsci.2011.01.003
- S. Suresh, G. F. Zamiski and R. O. Ritchie, Meta. Tran. A, 12A, 1435 (1981).
- J. M. Lee, J. H. Yoon, M. W. Kim, B. S. Lee and S. I. Kwun, J. Kor. Inst. Met. Mater. 45, 593 (2007).
- A. Puskar and L. Varkoly, Fatigue Fract. Eng. Mater. Struct. 9, 143 (1986). https://doi.org/10.1111/j.1460-2695.1986.tb00442.x
- G. R. Irwin, Pro. 7th Sagamore Ordance Mater. Res. Conf. (1960).
- Masahiro, Fartigue Crack, intervision, Seoul (2006).
- Newman and Elber, Mechanics of fatigue crack closure, ASTM, Philadelphia (1988).
- Z. Mei and J. W. Morris, Meta. Tran. A, 21A, 3137 (1990).
- C. Bathias, A. Pineau, J. Pluvinage and P. Rubbe, Adv. Res. Frac. Mater., 1283 (1978).
- Hans-Peter Seifert and Stefan Ritter, PSI Bericht Nr. 09-03, PSI, Switzerland (2009).
- D. A. Jones, Principles and Prevention of Corrosion, Prentice Hall, USA (1999).
- O. K. Chopra, W. J. Shack, NUREG/CR-6717, ANL-00/ 27, U.S. NRC (2001).
- O. K. Chopra, NUREG/CR-6787, ANL-01/25, U.S. NRC (2002).
- E. Herms, J. M. Olive and M. Puiggali, Mater. Sci. Eng. A, 272, 279 (1999). https://doi.org/10.1016/S0921-5093(99)00319-6
- Y. Murakami and S. Mastsuoka, Eng. Fract. Mech., 77, 1926 (2010). https://doi.org/10.1016/j.engfracmech.2010.04.012
- H. Kobayashi, H. Tsuji, and K. D. Park, Int. J. Automotive Tech., 460 (1990).
- T. Kanezaki and C. Narazak, Int. J. Hydrogen Energ., 33, 2604 (2008). https://doi.org/10.1016/j.ijhydene.2008.02.067
- G. Lothongkum, P. Wongpanya, S. Morito, T. Furuhara and T. Maki, Corrosion. Sci., 48, 137 (2006). https://doi.org/10.1016/j.corsci.2004.11.017
- Y. S. Kim, J. Corrosion Sci. Soc. Korea, 21, 189 (1992).
- R. C. Newman, T. Shahrabi, Corrosion. Sci., 27, 827 (1987). https://doi.org/10.1016/0010-938X(87)90040-0
- Xiluo, Ruitang, Chongsheng Long, Zhi Miao, Zhi Miao, Qian Peng and Cong Li, Nucl. Eng. Tech., 40, 147 (2007).