Smart Structures and Systems

  • 제15권4호
  • /
  • Pages.1121-1137
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Probabilistic-based damage identification based on error functions with an autofocusing feature

  • Gorgin, Rahim (State Key Laboratory of Structural Analysis for Industry Equipments, School of Aeronautics and Astronautics, Dalian University of Technology) ;
  • Ma, Yunlong (Beijing Aerospace System Engineering Institute) ;
  • Wu, Zhanjun (State Key Laboratory of Structural Analysis for Industry Equipments, School of Aeronautics and Astronautics, Dalian University of Technology) ;
  • Gao, Dongyue (State Key Laboratory of Structural Analysis for Industry Equipments, School of Aeronautics and Astronautics, Dalian University of Technology) ;
  • Wang, Yishou (State Key Laboratory of Structural Analysis for Industry Equipments, School of Aeronautics and Astronautics, Dalian University of Technology)
  • 투고 : 2014.05.09
  • 심사 : 2014.11.18
  • 발행 : 2015.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents probabilistic-based damage identification technique for highlighting damage in metallic structures. This technique utilizes distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. Diagnostic signals were used to define the scatter signals of different paths. The energy of scatter signals till different times were calculated by taking root mean square of the scatter signals. For each pair of parallel paths an error function based on the energy of scatter signals is introduced. The resultant error function then is used to estimate the probability of the presence of damage in the monitoring area. The presented method with an autofocusing feature is applied to aluminum plates for method verification. The results identified using both simulation and experimental Lamb wave signals at different central frequencies agreed well with the actual situations, demonstrating the potential of the presented algorithm for identification of damage in metallic structures. An obvious merit of the presented technique is that in addition to damages located inside the region between transducers; those who are outside this region can also be monitored without any interpretation of signals. This novelty qualifies this method for online structural health monitoring.

키워드

참고문헌

  1. Coverley, P.T. and Staszewski, W.J. (2003), "Impact damage location in composite structures using optimized sensor triangulation procedure", Smart Mater. Struct., 12(5), 795-803. https://doi.org/10.1088/0964-1726/12/5/017
  2. Hu, N., Shimomukai, T., Fukunaga, H. and Su, Z. (2008), "Damage identification of metallic structures using A0 mode of lamb waves", Struct. Health Monit., 7(3), 271-285. https://doi.org/10.1177/1475921708090566
  3. Ihn, J.B. and Chang, F.K. (2004), "Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics", Smart Mater. Struct., 13(3), 609-620. https://doi.org/10.1088/0964-1726/13/3/020
  4. Ihn, J.B. and Chang, F.K. (2008), "Pitch-catch active sensing methods in structural health monitoring for aircraft structures", Struct.Health Monit., 7(1), 5-19. https://doi.org/10.1177/1475921707081979
  5. Kundu, T., Das, S. and Jata, K.V. (2009), "Health monitoring of a thermal protection system using lamb waves", Struct. Health Monit., 8(1), 29-45. https://doi.org/10.1177/1475921708090558
  6. Lin, B. and Giurgiutiu, V. (2006), "Modeling and testing of PZT and PVDF piezoelectric wafer active sensors", Smart Mater. Struct., 15(4), 1085-1093. https://doi.org/10.1088/0964-1726/15/4/022
  7. Ling, H.Y., Lau, K.T., Cheng, L. and Jin, W. (2005), "Fibre optic sensors for delamination identification in composite beams using a genetic algorithm", Smart Mater. Struct., 14(1), 287-295. https://doi.org/10.1088/0964-1726/14/1/030
  8. Park, S., Yun, C.B., Roh, Y. and Lee, J.J. (2006), "PZT-based active damage detection techniques for steel bridge components", Smart Mater. Struct., 15(4), 957-966. https://doi.org/10.1088/0964-1726/15/4/009
  9. Sohn, H. and Lee, S.J. (2010), "Lamb wave tuning curve calibration for surface-bonded piezoelectric transducers", Smart Mater. Struct., 19(1), 015007. https://doi.org/10.1088/0964-1726/19/1/015007
  10. Sohn, H., Park, G., Wait, J.R., Limback, N.P. and Farrar, C.R. (2004), "Wavelet-based active sensing for delamination detection in composite structures", Smart Mater. Struct., 13(1), 153-160. https://doi.org/10.1088/0964-1726/13/1/017
  11. Su, Z. and Ye, L. (2004), "Lamb wave-based quantitative identification of delamination in CF/EP composite structures using artificial neural algorithm", Compos. Struct., 66(1-4), 627-637. https://doi.org/10.1016/j.compstruct.2004.05.011
  12. Su, Z., Ye, L. and Lu, Y. (2006), "Guided lamb waves for identification of damage in composite structures: A review", J. Sound Vib., 295(3-5), 753-780. https://doi.org/10.1016/j.jsv.2006.01.020
  13. Wang, C.H., Rose, J.T. and Chang, F.K. (2003), "A computerized time-reversal method for structural health monitoring", Proceedings of the SPIE Conference on Smart Structures/NDE, San Diego.
  14. Wang, C.H., Rose, J.T. and Chang, F.K. (2004), "A synthetic time-reversal imaging method for structural health monitoring", Smart Mater. Struct., 13(2), 413-423.
  15. Wang, D., Ye, L., Su, Z., Lu, Y., Li, F. and Meng, G. (2010), "Probabilistic damage identification based on correlation analysis using guided wave signals in aluminum plates", Struct. Health Monit., 9(2), 133-144. https://doi.org/10.1177/1475921709352145
  16. Wang, L. and Yuan, F.G. (2005), "Damage identification in a composite plate using prestack reverse-time migration technique", Struct. Health Monit., 4(3), 195-211. https://doi.org/10.1177/1475921705055233
  17. Worden, K. and Lane, A.J. (2001), "Damage identification using support vector machines", Smart Mater. Struct., 10(3), 540-547. https://doi.org/10.1088/0964-1726/10/3/317
  18. Wu, Z. and Chang, F.K. (2009), "Damage detection for composite laminate plates with a distributed hybrid PZT/FBG sensor network", J. Intel. Mat. Syst. Str., 20(9), 1069-1077. https://doi.org/10.1177/1045389X08101632
  19. Ye, L., Su, Z., Yang, C., He, Z. and Wang, X. (2006), "Hierarchical development of training database for artificial neural network-based damage identification", Compos. Struct., 76(3), 224-233. https://doi.org/10.1016/j.compstruct.2006.06.029
  20. Zhou, C., Su, Z. and Cheng, L. (2011), "Probability-based diagnostic imaging using hybrid features extracted from ultrasonic Lamb wave signals", Smart Mater. Struct., 20(12), 125005. https://doi.org/10.1088/0964-1726/20/12/125005

피인용 문헌

  1. Guided wave propagation in H-beam and probability-based damage localization vol.24, pp.5, 2017, https://doi.org/10.1002/stc.1916