Computers and Concrete

  • 제15권4호
  • /
  • Pages.673-686
  • /
  • 2015
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

On geometry dependent R-curve from size effect law for concrete-like quasibrittle materials

  • Zhao, Yan-Hua (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology) ;
  • Chang, Jian-Mei (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology) ;
  • Gao, Hong-Bo (College of Civil Engineering and Architecture, Hainan University)
  • 투고 : 2014.07.21
  • 심사 : 2014.11.15
  • 발행 : 2015.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

R-curve based on the size effect law previously developed for geometrically similar specimens (geometry type III) is extended to geometries with variable depth (geometry type I) as well as with variable notch (geometry type II), where the R-curve is defined as the envelope of the family of critical strain energy release rates from specimens of different sizes. The results show that the extended R-curve for type I tends to be the same for different specimen configurations, while it is greatly dependent on specimen geometry in terms of the initial crack length. Furthermore, the predicted load-deflection responses from the suggested R-curve are found to agree well with the testing results on concrete and rock materials. Besides, maximum loads for type II specimen are predicted well from the extended R-curve.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Bazant, Z.P., Kim, J.K. and Pfeiffer, P.A. (1986), "Nonlinear fracture properties from size effect tests", J. Struct. Eng. Div. ASCE, 112(2), 289-307. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(289)
  2. Bazant, Z.P. and Kazemi, M.T. (1990), "Determination of fracture energy, process zone length and brittle number from size effect with application to rock and concrete", Int. J. Fract., 44(2), 111-131. https://doi.org/10.1007/BF00047063
  3. Bazant, Z.P., Gettu, R. and Kazemi, M.T. (1991), "Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves", Int. J. Rock. Mech. Min., 28(1), 43-51. https://doi.org/10.1016/0148-9062(91)93232-U
  4. de Moura, M.F.S.F., Morais, J.J.L. and Dourado, N. (2008), "A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam test", Eng. Fract. Mech., 75(13), 3852-3865. https://doi.org/10.1016/j.engfracmech.2008.02.006
  5. de Moura, M.F.S.F., Dourado, N. and Morais, J.J.L. (2010), "Crack equivalent based method applied to wood fracture characterization using the single edge notched-three point bending test", Eng. Fract. Mech., 77(3), 510-520. https://doi.org/10.1016/j.engfracmech.2009.10.008
  6. Dong, W., Wu, Z.M. and Zhou, X.M. (2013), "Calculating crack extension resistance of concrete based on a new crack propagation criterion", Constr. Build Mater., 38, 879-889. https://doi.org/10.1016/j.conbuildmat.2012.09.037
  7. Ferreira, L.E.T., Bittencourt, T.N., Sousa, J.L.A.O. and Gettu, R. (2002), "R-curve behavior in notched beam tests of rocks", Eng. Fract. Mech., 69(17), 1845-1852. https://doi.org/10.1016/S0013-7944(02)00064-4
  8. Jenq, Y.S. and Shah, S.P. (1985a), "Two parameter fracture model for concrete", J. Eng. Mech., 11(10), 1227-1241.
  9. Jenq, Y.S. and Shah, S.P. (1985b), "A fracture toughness criterion for concrete", Eng. Fract. Mech., 21(5), 1055-1069. https://doi.org/10.1016/0013-7944(85)90009-8
  10. Krafft, J.M., Sullivan, A.M. and Boyle, R.W. (1961), "Effect of dimensions on fast fracture instability of notched sheets", Proceedings of the Crack Propagation Symposium, Cranfied, UK, August.
  11. Kumar, S. and Barai, S.V. (2009), "Weight function approach for determining crack extension resistance based on the cohesive stress distribution in concrete", Eng. Fract. Mech., 76, 1131-1148. https://doi.org/10.1016/j.engfracmech.2009.01.010
  12. Morel, S., Dourado, N., Valentin, G. and Morais, J. (2005), "Wood: a quasi-brittle material R-curve behavior and peak load evaluation", Int. J. Fract,, 131(4), 385-400. https://doi.org/10.1007/s10704-004-7513-0
  13. Ouyang, C.S., Mobasher, B. and Shah, S.P. (1990), "An R-curve approach for fracture of quasi-brittle materials", Eng. Fract. Mech., 37(4), 901-913. https://doi.org/10.1016/0013-7944(90)90087-W
  14. Ouyang, C.S. and Shah, S.P. (1991), "Geometry-dependent R-curve for quasi-brittle materials", J. Am. Ceram. Soc., 74(11), 2831-2836. https://doi.org/10.1111/j.1151-2916.1991.tb06851.x
  15. RILEM. (1990), "Determination of fracture parameters (KIc and CTODc) of plain concrete using Three-Point bend tests" (RILEM draft recommendations), Mater. Struct., 23(6), 457-460. https://doi.org/10.1007/BF02472029
  16. RILEM. (1991), "Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18(106), 285-290.
  17. Tada, H., Paris, P.C. and Irwin, G.R. (2000), The stress analysis of cracks handbook(Third Edition), The American Society of Mechanical Engineers ,Professional Engineering Publishing, New York, NY, USA.
  18. Tang, T.X., Bazant, Z.P., Yang, S. and Zollinger, D. (1996), "Variable-notch one-size test method for fracture energy and process zone length", Eng. Fract. Mech., 55(3), 383-404. https://doi.org/10.1016/0013-7944(96)00030-6
  19. Xu, S.L. and Zhang, X.F. (2008). "Determination of fracture parameters for crack propagation in concrete using an energy approach", Eng. Fract. Mech., 75, 4292-4308. https://doi.org/10.1016/j.engfracmech.2008.04.022
  20. Xu, F., Wu, Z.M., Zheng, J.J., Zhao, Y.H. and Liu, K. (2011), "Crack extension resistance curve of concrete considering variation of FPZ length", J. Mater. Civil Eng. ASCE, 23, 703-710. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000207
  21. Yang, W. and Shah, S.P. (2001), "A geometry and size dependent fracture resistance curve", Int. J. Fract., 109(3), 23-28. https://doi.org/10.1023/A:1012298528032
  22. Zhao, Y.H., Xu, S.L. and Wu, Z.M. (2007), "Variation of fracture energy dissipation along evolving fracture process zones in concrete", J. Mater. Civ. Eng., 19(8), 625-633. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:8(625)

피인용 문헌

  1. Two scale modeling of behaviors of granular structure: size effects and displacement fluctuations of discrete particle assembly vol.55, pp.2, 2015, https://doi.org/10.12989/sem.2015.55.2.315
  2. Testing specimen effect on shrinkage of lightweight concrete vol.171, pp.3, 2018, https://doi.org/10.1680/jstbu.16.00125
  3. Size effect and age factor in mechanical properties of BST Light Weight Concrete vol.177, pp.None, 2018, https://doi.org/10.1016/j.conbuildmat.2018.05.115
  4. Size effect study on compressive strength of SCLC vol.23, pp.6, 2015, https://doi.org/10.12989/cac.2019.23.6.409