DOI QR코드

DOI QR Code

Prediction of RC structure service life from field long term chloride diffusion

  • Safehian, Majid (Concrete Technology and Durability Research Center, Department of Civil and Environment Engineering, Amirkabir University of Technology) ;
  • Ramezanianpour, Ali Akbar (Concrete Technology and Durability Research Center, Department of Civil and Environment Engineering, Amirkabir University of Technology)
  • 투고 : 2014.07.21
  • 심사 : 2014.11.15
  • 발행 : 2015.04.25

초록

It is well-documented that the major deterioration of coastal RC structures is chloride-induced corrosion. Therefore, regional investigations are necessary for durability based design and evaluation of the proposed service life prdiction models. In this paper, four reinforced concrete jetties exposed to severe marine environment were monitored to assess the long term chloride penetration at 6 months to 96 months. Also, some accelerated durability tests were performed on standard samples in laboratory. As a result, two time-dependent equations are proposed for basic parameters of chloride diffusion into concrete and then the corrosion initiation time is estimated by a developed probabilistic service life model Also, two famous service life prediction models are compared using chloride profiles obtained from structures after about 40 years in the tidal exposure conditions. The results confirm that the influence of concrete quality on diffusion coefficients is related to the concrete pore structure and the time dependence is due to chemical reactions of sea water ions with hydration products which lead a reduction in pore structure. Also, proper attention to the durability properties of concrete may extend the service life of marine structures greater than fifty years, even in harsh environments.

키워드

참고문헌

  1. ACI (American Concrete Institute) (2008), ACI 318-08: Building Code Requirements for Structural Concrete, ACI, Farmington Hills, MI, USA.
  2. Amey, S.L., Johnson, D.A., Miltenberger, M.A. and Farzam, H. (1998), "Predicting the service life of concrete marine structures: an environment methodology", ACI Struct. J., 95(2), 205-214.
  3. Andrade, C., Tavares, F., Castellote, M., Petre-Lazars, I., Climent, M.A. and Vera, G. (2006), "Comparison of chloride models: the importance of surface condition", In: Second international symposium on advances in concrete through science and engineering, Quebec City, Canada.
  4. Andrade, C., Prieto, M., Tanner, P., Tavares, F. and Andrea, R. (2013), "Testing and modelling chloride penetration into concrete", Constr. Build. Mater., 39, 9-18. https://doi.org/10.1016/j.conbuildmat.2012.08.012
  5. Bamforth, P.B. and Price, W.F. (1997), An international Review of Chloride Ingress into Structural Concrete, Transport Research Laboratory report 359, Scotland.
  6. Cheewaket, T., Jaturapitakkul, C. and Chalee, W. (2013), "Concrete durability presented by acceptable chloride level and chloride diffusion coefficient in concrete: 10-year results in marine site", Mater. Struct., DOI 10.1617/s11527-013-0131-4.
  7. Costa, A. and Appleton, J. (1999), "Chloride penetration into concrete in marine environment-Part II: Prediction of long term chloride penetration", Mater. Struct., 32, 354-359. https://doi.org/10.1007/BF02479627
  8. Crank, J. (1975), he Mathematics of Diffusion. 2nd ed, London, Oxford.
  9. Dousti, A., Shekarchi, M., Alizadeh, R. and Taheri, A. (2011), "Binding of externally supplied chlorides in micro silica concrete under field exposure conditions", Constr. Build. Mater., 33, 1071-1079.
  10. EN 206-1, (2001), Concrete-Part 1: Specification, Performance, Production and Conformity, European standard, Berlin, Germany.
  11. Hooton, R.D., Geiker, M.R. and Bentz, E.C. (2002), "Effects of curing on chloride ingress and implications on service life, ACI Mater. J., 99, 201-206.
  12. Kassir, M.K. and Ghosn, M. (2002), "Chloride-induced corrosion of reinforced concrete bridge decks", Cement Concrete Res., 32, 139-143. https://doi.org/10.1016/S0008-8846(01)00644-5
  13. Kropp, J. (1995), "Chlorides in concrete. In: Performance criteria for concrete durability", RILEM Report 12, E& FN SPON, 138-164.
  14. Lau, K., Powers, R.G. and Sagues, A.A. (2006), "Corrosion performance of concrete cylinder piles", In: 61th NACE conference on corrosion, Houston, USA.
  15. Mangat, P.S. and Molloy, B.T. (1994), "Prediction of long-term chloride concentration in concrete", Mater. Struct., 27, 338-346. https://doi.org/10.1007/BF02473426
  16. Mehta, P.K. (1988), "Durability of concrete exposed to marine environment- fresh look", ACI SP 109, 1-29.
  17. Model code-fib, (2011), fib Special Activity Group 5.
  18. Moodi, F., Ramezanianpour, A.A. and Jahangiri, E. (2014), "Assessment of some parameters of corrosion initiation prediction of reinforced concrete in marine environments", Comput. Concr., 13(1).
  19. Moradllo, M., Shekarchi, M. and Hoseini, M. (2012), "Time-dependent performance of concrete surface coatings in tidal zone of marine environment", Constr. Build. Mater., 30(1), 198-205. https://doi.org/10.1016/j.conbuildmat.2011.11.044
  20. Nilsson, L.O. (2006), "Present limitations of models for predicting chloride ingress into reinforced concrete structures", J. Phys. IV France, 136, 123-130. https://doi.org/10.1051/jp4:2006136013
  21. Nokken, M., Boddy, A., Hooton, R.D. and Thomas, M.D.A. (2006), "Time dependent diffusion in concretethree laboratory studies", Cement Concrete Res., 36, 200-207. https://doi.org/10.1016/j.cemconres.2004.03.030
  22. Pack, S., Jung, M., Song, H., Kim, S. and Ann, K.Y. (2010), "Prediction of time dependent chloride transport in concrete structures exposed to a marine environment", Cement Concrete Res., 40, 302-312. https://doi.org/10.1016/j.cemconres.2009.09.023
  23. Petcherdchoo, A. (2013), "Time dependent models of apparent diffusion coefficient and surface chloride for chloride transport in fly ash concrete", Constr. Build. Mater., 38, 497-507. https://doi.org/10.1016/j.conbuildmat.2012.08.041
  24. Ramezanianpour, A.A., Jahangiri, E., Ahmadi, B. and Moodi, F. (2012), "Evaluation and modification of the fib service-Life design model for the Persian Gulf region", In: fib symposium: concrete structures for sustainable community, Stockholm, Sweden.
  25. Ramezanianpour, A.A. and Pourkhorshid, A.R. (2012), "Durable concretes for hot and severe environments", In: International congress on durability of concrete, Trondheim, Norway.
  26. Rilem report 14, (1996), "Durability design of concrete structures", In: Sarja A, Vesikari E, Editors, E&FN Spon.
  27. Saassouh, B. and Lounis, Z. (2012), "Probabilistic modeling of chloride-induced corrosion in concrete structures using first and second-order reliability methods", Cement Concrete Compos., 34, 1082-1093. https://doi.org/10.1016/j.cemconcomp.2012.05.001
  28. Safehian, M. and Ramezanianpour, A.A. (2013), "Assessment of service life models for determination of chloride penetration into silica fume concrete in the severe marine environmental condition", Constr. Build. Mater., 48(1), 287-294. https://doi.org/10.1016/j.conbuildmat.2013.07.006
  29. Safehian, M. and Ramezanianpour, A.A. (2014), "Assessment of long term chloride diffusion in real RC structures in marine environment", European J.Sci. Res., 120(3), 332-345.
  30. Shekarchi, M., Alizadeh, R., Ghods, P., Chini, M. and Hosseini, M. (2008), "Durability based design of RC structures in south of Iran using DuraPGulf model", AJSE, Arabian J.Sci. Eng., 33(1), 77-88.
  31. Shekarchi, M., Moradi, F. and Pargar, F. (2011), "Study on corrosion damage of a reinforced concrete jetty structure in coastal region of Persian Gulf, a case Study", Struct. Infrastr. Eng., 7(9), 701-713. https://doi.org/10.1080/15732470902823903
  32. Shin, K.J., Kim, J.S. and Lee, K.M., (2011), "Probability-based durability design software for concrete structures subjected to chloride exposed environments", Comput. Concr., 8(5).
  33. Stanish, K. and Thomas, M.D.A., (2003), "The use of bulk diffusion tests to establish time-dependent concrete chloride diffusion coefficients", Cement Concrete Res., 33, 55-62. https://doi.org/10.1016/S0008-8846(02)00925-0
  34. Tang, L. and Gulikers, J. (2007), "On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete", Cement Concrete Res., 37, 589-595. https://doi.org/10.1016/j.cemconres.2007.01.006
  35. Thomas, M.D.A. and Bentz, E.C. (2001), "Life 365: Computer program for predicting the service life and life-cycle costs of reinforced concrete exposed to chlorides", Am. Concrete Inst., Committee 365, Service life prediction, Detroit, Michigan.
  36. Tuutti, K. (1996), "Chloride induced corrosion in marine concrete structures", In: Durability of concrete on saline environment, Uppsala; 81-93.
  37. Vennesland, Q., Climent, M.A. and Andrade, C. (2013), "Recommendation of RILEM TC 178-TMC: Testing and modelling chloride penetration in concrete", Mater. Struct., 46, 337-344. https://doi.org/10.1617/s11527-012-9968-1
  38. Wang, X.Y., Park, K.B. and Lee, H.S. (2012), "Modeling of chloride diffusion in a hydrating concrete incorporating silica fume", Comput. Concr., 10(5).
  39. Yuan, Q., Shi, C., Schutter, G.D., Audenaert, K. and Deng, D. (2009), "Chloride binding of cement-based materials subjected to external chloride environment-A review", Constr. Build. Mater., 23(1), 1-13. https://doi.org/10.1016/j.conbuildmat.2008.02.004
  40. Zhang, S., Lu, C. and Liu, R. (2011), "Experimental determination of chloride penetration in cracked concrete beams", Procedia Eng., 24, 380-384. https://doi.org/10.1016/j.proeng.2011.11.2661

피인용 문헌

  1. Practical evaluation of rapid tests for assessing the Chloride resistance of concretes containing Silica Fume vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.793
  2. Performance-based remaining life assessment of reinforced concrete bridge girders vol.18, pp.1, 2016, https://doi.org/10.12989/cac.2016.18.1.069
  3. Modified electrical conductivity test method for evaluation concrete permeability vol.16, pp.6, 2015, https://doi.org/10.12989/cac.2015.16.6.865
  4. Probabilistic Generalization of a Comprehensive Model for the Deterioration Prediction of RC Structure under Extreme Corrosion Environments vol.10, pp.9, 2018, https://doi.org/10.3390/su10093051
  5. Practical evaluation of rapid tests for assessing the Chloride resistance of concretes containing Silica Fume vol.18, pp.4, 2016, https://doi.org/10.12989/cac.2016.18.4.793
  6. Numerical modeling of concrete cover cracking due to steel reinforcing bars corrosion vol.61, pp.6, 2017, https://doi.org/10.12989/sem.2017.61.6.693
  7. Accelerated life testing of concrete based on stochastic approach and assessment vol.19, pp.1, 2017, https://doi.org/10.12989/cac.2017.19.1.111
  8. Experimental study on durability of strengthened corroded RC columns with FRP sheets in tidal zone of marine environment vol.19, pp.4, 2015, https://doi.org/10.12989/cac.2017.19.4.339
  9. Mesoscale model for cracking of concrete cover induced by reinforcement corrosion vol.22, pp.1, 2015, https://doi.org/10.12989/cac.2018.22.1.053
  10. A simplified probabilistic model for the combined action of carbonation and chloride ingress vol.71, pp.7, 2019, https://doi.org/10.1680/jmacr.18.00140
  11. Durability of Recycled Steel Fiber Reinforced Concrete in Chloride Environment vol.7, pp.12, 2015, https://doi.org/10.3390/fib7120111
  12. Influence of data acquisition and processing on surface chloride concentration of marine concrete vol.273, pp.None, 2021, https://doi.org/10.1016/j.conbuildmat.2020.121705
  13. Application of Novel Machine Learning Techniques for Predicting the Surface Chloride Concentration in Concrete Containing Waste Material vol.14, pp.9, 2015, https://doi.org/10.3390/ma14092297
  14. The Rapid Chloride Migration Test in Assessing the Chloride Penetration Resistance of Normal and Lightweight Concrete vol.11, pp.16, 2021, https://doi.org/10.3390/app11167251
  15. Sensitivity Analysis of Stochastic Calculation of SCC Regarding Aggressive Environment vol.14, pp.22, 2021, https://doi.org/10.3390/ma14226838