DOI QR코드

DOI QR Code

A Second Order Sliding Mode Control of Container Cranes with Unknown Payloads and Sway Rates

미지의 부하와 흔들림 각속도를 갖는 컨테이너 크레인의 2차 슬라이딩 모드 제어

  • Baek, Woon-Bo (Department of Mechatronics Engineering, Dong-eui University)
  • 백운보 (동의대학교 메카트로닉스공학과)
  • Received : 2014.08.26
  • Accepted : 2015.01.08
  • Published : 2015.02.01

Abstract

This paper introduces a sway suppression control for container cranes with unknown payloads and sway rates. With no priori knowledge concerning the magnitude of payload mass and sway rate, the proposed control maintains superior sway suppressing and trolley positioning against external disturbances. The proposed scheme combines a second order sliding mode control and an adaptive control to cope with unknown payloads. A second order sliding mode control without feedback of the sway rate is first designed, which is based on a class of feedback linearization methods for stabilization of the under-actuated sway dynamics of the container. Under applicable restrictions of the magnitude of payload inertia and sway rate, a linear regression model is obtained, and an adaptive control with a payload estimator is then designed, which is based on Lyapunov stability methods for the fast attenuation of trolley oscillations in the vicinity of the target position. The asymptotic stability of the overall closed-loop system is assured irrespective of variations of rope length. Simulation are shown in the existence of initial sway and external wind disturbances.

Keywords

References

  1. K. S. Hong, B. J. Park, and M. H. Lee, "Two-stage control for container cranes," JSME International Journal, Series C, vol. 43, no. 2, pp. 273-282, 2000. https://doi.org/10.1299/jsmec.43.273
  2. J. Yi, N. Yubazaki, and K. Hirota, "Anti-swing and positioning control of overhead travelling crane," Information Science: an Int. Journal, vol. 155, no. 1-2, pp. 19-42, 2003. https://doi.org/10.1016/S0020-0255(03)00127-0
  3. H. Omar and A. Nayfeh, "Anti-swing control of gantry and tower cranes using fuzzy and time -delayed feedback with friction compensation," Shock and Vibration, vol. 12. pp. 73-89, 2005. https://doi.org/10.1155/2005/890127
  4. B. G. Kim and S. W. Hong, "Input shaper design for tower crane in consideration of nonlinear coupled motions," J. of the KSPE, vol. 26, pp. 88-95. 2003.
  5. H. Lee, "New approach for the anti-swing control of overhead cranes with high-speed load hoisting," International Journal of Control, vol. 76, no. 15, pp. 1493-1499, 2003. https://doi.org/10.1080/00207170310001604954
  6. H. Lee, Y. Liang, and D. Segura, "Sliding-mode anti- swing trajectory control for overhead cranes with high-speed load hoisting," Trans. of ASME, vol. 128, pp. 842-845, 2006.
  7. M. S. Park, D. Chwa, and S. K. Hong, "Anti-sway tracking control of overhead cranes with system uncertainty and actuator nonlinearity using an fuzzy sliding_mode control," IEEE, Trans. on Industrial Electronics, vol. 55, no. 11, pp. 3972-3984, 2008. https://doi.org/10.1109/TIE.2008.2004385
  8. H. Park, D. Chwa, and K. S. Hong, "A feedback linearization control of container cranes: varying rope length," International Journal of Control, Automation, and Systems, vol. 5, no. 4, pp. 379-387, 2007.
  9. W. B. Baek, "A study on the sway suppression control of container cranes," Journal of KSMTE, vol. 21, no. 2, pp. 109-115, 2012.
  10. W. B. Baek, "Anti-sway tracking control of container cranes with friction compensation," Journal of KSMTE, vol. 21, no. 6, pp. 878-884, 2012.
  11. L. A. Tuan, S.-G. Lee, V.-H. Dang, S. C. Moon, and B. S. Kim, "Partial feedback linearization control of a three-dimensional overhead crane," International Journal of Control, Automation, and Systems, vol. 11, no. 4, pp.718-727, 2013. https://doi.org/10.1007/s12555-012-9305-z
  12. W. B. Baek and J.-S. Lim "Adaptive variable structure control of container cranes with unknown payload and friction," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 20, no. 10, pp. 1008-1013, 2014. https://doi.org/10.5302/J.ICROS.2014.14.0085