DOI QR코드

DOI QR Code

Weight and topology optimization of outrigger-braced tall steel structures subjected to the wind loading using GA

  • Nouri, Farshid (Department of Civil Engineering, University of Zanjan) ;
  • Ashtari, Payam (Department of Civil Engineering, University of Zanjan)
  • 투고 : 2014.07.13
  • 심사 : 2015.01.21
  • 발행 : 2015.04.25

초록

In this paper, a novel methodology is proposed to obtain optimum location of outriggers. The method utilizes genetic algorithm (GA) for shape and size optimization of outrigger-braced tall structures. In spite of previous studies (simplified methods), current study is based on exact modeling of the structure in a computer program developed on Matlab in conjunction with OpenSees. In addition to that, exact wind loading distribution is calculated in accordance with ASCE 7-10. This is novel since in previous studies wind loading distributions were assumed to be uniform or triangular. Also, a new penalty coefficient is proposed which is suitable for optimization of tall buildings. Newly proposed penalty coefficient improves the performance of GA and results in a faster convergence. Optimum location and number of outriggers is investigated. Also, contribution of factors like central core and outrigger rigidity is assessed by analyzing several design examples. According to the results of analysis, exact wind load distribution and modeling of all structural elements, yields optimum designs which are in contrast of simplified methods results. For taller frames significant increase of wind pressure changes the optimum location of outriggers obtained by simplified methods. Ratio of optimum location to the height of the structure for minimizing weight and satisfying serviceability constraints is not a fixed value. Ratio highly depends on height of the structure, core and outriggers stiffness and lateral wind loading distribution.

키워드

참고문헌

  1. AISC (2010), Specification for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Illinois, USA.
  2. ASCE/SEI 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers ASCE, Reston, Virginia, USA.
  3. ASTM Standard A572/A572M - 13a (2013), Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel, USA.
  4. Coello, C. and Carlos A. (2000), "Use of a self-adaptive penalty approach for engineering optimization problems", Comput. Ind., 41(2), 113-127. https://doi.org/10.1016/S0166-3615(99)00046-9
  5. Ding, J.M. (1991), "Optimum belt truss location for high-rise structures and top level drift coefficient", J. Build. Struct., 4, 10-13.
  6. Griffis, L.G. (2003), "Serviceability limit states under wind load", Engineering journal / American institute of steel construction.
  7. Hoenderkamp, J.C.D. (2008), "Second outrigger at optimum location on high-rise shear wall", Struct. Des. Tall Spec., 17(3), 619-634. https://doi.org/10.1002/tal.369
  8. Hoenderkamp, J.C.D. and Bakker, M.C.M. (2003), "Analysis of high-rise braced frames with outriggers", Struct. Design Tall Spec., 12(4), 335-350. https://doi.org/10.1002/tal.226
  9. Huang, M.F., Chan C.M. and Kwok, K.C.S. (2011), "Occupant comfort evaluation and wind-induced serviceability design optimization of tall buildings", Wind Struct., 14 (6), 559-582. https://doi.org/10.12989/was.2011.14.6.559
  10. Jahanshahia, R. and Rahgozar, M.R. (2012), "Free vibration analysis of combined system with variable cross section in tall buildings", Struct. Eng. Mech., 42(5), 715-728. https://doi.org/10.12989/sem.2012.42.5.715
  11. Kameshki, E.S. and Saka, M.P. (2001), "Genetic algorithm based optimum bracing design of non-swaying tall plane frames", J. Constr. Steel Res., 57(10), 1081-1097. https://doi.org/10.1016/S0143-974X(01)00017-7
  12. Lee, D.K., Kim, J.H., Starossek, U. and Shin, S.M. (2012), "Evaluation of structural outrigger belt truss layouts for tall buildings by using topology optimization", Struct. Eng. Mech., 43(6), 711-724. https://doi.org/10.12989/sem.2012.43.6.711
  13. Lee, J.H., Bang, M.S. and Kim, J.Y.(2008), "An analytical model for high-rise wall-frame structures with outriggers", Struct. Design Tall Spec., 17(4), 839-851. https://doi.org/10.1002/tal.406
  14. McKenna, F., Fenves, G.L., Scott, M.H. and Jeremic, B. (2014), Open System for Earthquake Engineering Simulation (OpenSees), Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
  15. McNabb, J.W. and Muvdi, B.B. (1975), "Drift reduction factors for belt high-rise structures", Engineering Journal 3rd Quarter, 88-91.
  16. Nanduri, P.M.B.R.K, Suresh, B. and Hussain, M.D.I. (2013), "Optimum position of outrigger system for high-rise reinforced concrete buildings under wind and earthquake loadings", Am. J. Eng. Res.(AJER), 2(8), 76-89.
  17. Rahgozar, R., Ahmadi, A.R., Hosseini, O. and Malekinejad, M. (2011), "A simple mathematical model for static analysis of tall buildings with two outrigger-belt truss systems." , Struct. Eng. Mech., 40(1), 65-84. https://doi.org/10.12989/sem.2011.40.1.065
  18. Safari, D., Maheri, Mahmoud R. and Maheri, A. (2011), "Optimum design of steel frames using a multiple-deme GA with improved reproduction operators", J. Constr. Steel Res., 67(8), 1232-1243. https://doi.org/10.1016/j.jcsr.2011.03.003
  19. Smith, B. S. and Coull, A. (1991), Tall Building Structures, Wiley, New York, USA.
  20. Taranath, B.S. (1975), "Optimum belt truss locations for high rise structures", Struct. Eng., 53(8), 345-348.
  21. Taranath, B.S. (1998), Steel, Concrete, and Composite Design of Tall Buildings, (2nd Ed.), McGraw-Hill, New York, USA.
  22. Wu, J.R. and Li, Q. (2003), "Structural performance of multi-outrigger braced tall buildings", Struct. Des. Tall Spec., 12(2), 155-176. https://doi.org/10.1002/tal.219
  23. Zeidabadi, N.A., Mirtalae, K. and Mobasher, B. (2004), "Optimized use of the outrigger system to stiffen the couple shear walls in tall buildings", Struct. Des. Tall Spec., 13(1), 9-27. https://doi.org/10.1002/tal.228

피인용 문헌

  1. Topology optimization of bracing systems using a truss-like material model vol.58, pp.2, 2016, https://doi.org/10.12989/sem.2016.58.2.231
  2. The Optimal Number of Outriggers in a Structure Under Different Lateral Loadings vol.100, pp.4, 2019, https://doi.org/10.1007/s40030-019-00379-7
  3. Outrigger and Belt-Truss System Design for High-Rise Buildings: A Comprehensive Review Part II-Guideline for Optimum Topology and Size Design vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/2589735
  4. Emerging trends in the growth of structural systems for tall buildings vol.5, pp.3, 2020, https://doi.org/10.1080/24705314.2020.1765270
  5. Optimum design method for simplified model of outrigger and ladder systems in tall buildings using genetic algorithm vol.28, pp.None, 2015, https://doi.org/10.1016/j.istruc.2020.09.066
  6. Topology Optimisation in Structural Steel Design for Additive Manufacturing vol.11, pp.5, 2015, https://doi.org/10.3390/app11052112
  7. An analytical optimization study on the core-outrigger system for efficient design of tall buildings under static lateral loads vol.46, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103762