The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Cavitating Flow Analysis of Multistage Centrifugal Pump

다단 원심펌프의 공동현상 유동해석

  • Received : 2014.09.29
  • Accepted : 2014.11.04
  • Published : 2015.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to investigate cavitating flow of the multistage centrifugal pump. Cavitation is observed in the impeller leading edge and trailing edge of the suction area. Head coefficients are measured under different flow operating conditions. The Rayleigh-Plesset cavitation model is adapted to predict the occurrence of cavitation in the pump. The two-phase gas-liquid homogeneous CFD method is used to analyze the centrifugal pump performances with two equation transport turbulence model. The simulations are carried out with three different flow coefficients such as 0.103, 0.128 and 0.154. The occurrence of cavitation described according to water vapor volume fraction. The head versus NPSH (Net Positive Suction Head) also measured using different flow coefficients. Development of cavitation in the centrifugal pump impellerI is discussed. It is showed that the simulation represents the head drop about 3%.

Keywords

References

  1. Kim, D. H., and Park, W. G. et al., 2012, "Numerical simulation of cavitating flow past axisymmetric body," Int. J. Naval Architect Ocean Engineering, Vol. 4, pp. 256-266. https://doi.org/10.3744/JNAOE.2012.4.3.256
  2. Knapp, R. T., Daily, J. W. and Hammitt, F. G., 1970, Cavitation, McGraw-Hill, New York, pp. 5-8.
  3. Pumping Station Engineering Hand Book, 1991, Japan Association of Agriculture Engineering Enterprises, Tokyo, pp. 50-90.
  4. Shin, B. R. et al., 2004, "Application of preconditioning method to gas-liquid two-phase flow computations," Journal of Fluids Engineering, ASME, Vol. 126, pp. 605-612. https://doi.org/10.1115/1.1777230
  5. Medvitz, R. B., Kunz, R. F., Boger, D. A. et al., 2002, "Performance analysis of cavitating flow in centrifugal pumps using multiphase CFD," J. of Fluids Eng., Vol. 124, pp. 377-383. https://doi.org/10.1115/1.1457453
  6. Pierrat, D., Gros, L. et al., 2008, "Experimental and numerical investigations of leading edge cavitation in a helico-centrifugal pump," 12th Int. Symp. on Transport Phenomena and Dynamic of Rotating Machinery, pp. 1-19.
  7. Pouffary, B., Patella, R. F., Reboud, J. L. et al., 2008, "Numerical simulation of 3D cavitating flows analysis of cavitation head drop in turbomachinery," J. of Fluids Eng,, Vol. 130, pp. 301-310.
  8. Coutier, D. O., Fortes, P. R., Reboud, J. et al., 2003, "Evaluation of the turbulence model influence on the numerical simulations of unsteady cavitation," J. of Fluids Eng,, Vol. 125, pp. 38-45. https://doi.org/10.1115/1.1524584
  9. Katz, J. and Acosta, A., 1982, "Observations of nuclei in cavitating flows," Applied Scientific Reasearch, Vol. 38 pp. 123-132. https://doi.org/10.1007/BF00385943
  10. LIU, H., REN, Y., WANG, K. et al., 2013, "Experimental investigation and numerical analysis of unsteady attached sheet cavitating flows in a centrifugal pump," Journal of Hydrodynamics, Vol. 25, No. 3, pp. 370-378. https://doi.org/10.1016/S1001-6058(11)60375-3
  11. Baradaran, F. and Nikseresht, A. H., 2012, "Numerical simualation of unsteady 3D cavitating flows over axisymmetric cavitators", Journal of Scientia Iranica, Vol. 19, No. 5, pp. 1258-1264. https://doi.org/10.1016/j.scient.2012.07.013
  12. Fard, M. P. and Roohi, E., 2008, "Transient simulations of cavitating flows using a modified volume of fluid(VOF) technique," Int. J. Computational Fluid Dynamics, Vol. 22, No. 1-2, pp. 97-114. https://doi.org/10.1080/10618560701733657
  13. Senocak, I. and Shyy, W., 2001, "Numerical simulation of turbulent flows with sheet cavitation," Int. Symp. on Cavitation, Vol. A7, pp. 2-8.
  14. Funada, T. and Joseph, D. D., 2001, "Viscous potential flow analysis of Kelvin-Helmholtz instability in a channel," Journal of Fluid Mechanics, Vol. 445, pp. 263-283.
  15. Saito, Y., Nakamori, I. et al., 2003, "Numerical analysis of unsteady vaporous cavitating flow around a hydrofoil," 5th Int. Symp. on Cavitation, pp. 1-06.
  16. Huang, B., Wang, G. Y. et al., 2010, "A cavitation model for cavitating flow simulations," J. of Hydrodynamics, Vol. 22, No. 5 pp. 798-804. https://doi.org/10.1016/S1001-6058(10)60033-9
  17. Peng, Y. C. and Chen, X. Y., 2010, "Numerical study of cavitation on the surface of the guide vane in three gorges hydropower unit," J. of Hydrodynamics, Vol. 22, No. 5 pp. 703-708. https://doi.org/10.1016/S1001-6058(09)60106-2
  18. Lijun, L., Jun, L., et al., 2006, "A numerical method for simulation of attached cavitation flows," Int. J. for Numerical Methods in Fluids, Vol. 52, pp. 639-658. https://doi.org/10.1002/fld.1192
  19. Delgosha, O. C., Petella, R. F. et al., 2005, "Stability of preconditioned Navier-Stokes equations associated with a cavitation model," J. of Computers and Fluids, Vol. 34, No. 3, pp. 319-349. https://doi.org/10.1016/j.compfluid.2004.05.007
  20. Sinnghal, A. K., Atavale, M. M., LI, H. et al., 2002, "Mathematical basis and validation of the full cavitation model," Journal of Fluids Engineering, Vol. 124, No. 3, pp. 617-624. https://doi.org/10.1115/1.1486223
  21. Kunz, R. F., Boger, D. A., Stinebring, D. R. et al., 2000, "A preconditioned Navier-Stokes method for two phase flows with application to cavitation prediction," J. of Computers and Fluids, Vol. 29, No. 8, pp. 849-875. https://doi.org/10.1016/S0045-7930(99)00039-0
  22. Senocak, I. and Shyy, W., 2002, "A pressure based method for turbulent cavitating flow components," J. of Computational Physics, Vol. 179, pp. 363-383.
  23. Coutier, D. O., Stutz, B., Vabre, A. et al., 2007, "Analysis of cavitating flow structure by experimental and numerical investigations," J. of Fluid Mechanics, Vol. 578, pp. 171-222. https://doi.org/10.1017/S0022112007004934
  24. Coutier, D. O., Fortes, P. R., Reboud, J. et al., 2003, "Experimental and numerical studies in a centrifugal pump with two-dimensional curved blades in cavitating condition," J. of Fluids Eng., Vol. 125, pp. 970-978. https://doi.org/10.1115/1.1596238
  25. Ansys Inc. 2013, ANSYS-CFX (CFX Introduction, CFX Reference guide, CFX Tutorials, CFX-Pre User's Guide, CFX-Solver Manager User's Guide, Theory Guide), release 14.5, USA.
  26. Menter, F. R., 1994, "Two-equation eddy-viscosity turbulence models for engineering applications," AIAA J., Vol. 32, No. 8, pp. 1598-1605. https://doi.org/10.2514/3.12149
  27. Nicholas, J. G., and Dennis, A. Y,. 2006, "Evaluation of modified two-equation turbulence models for jet flow predictions," 44th AIAA J., pp. 1-12. https://doi.org/10.2514/1.21840
  28. Bruno, S., and Frank, C. V., 2009, "Pump cavitation-various NPSHR criteria, NPSHA margins, and impeller expectancy," Proceedings of the twenty fifth international pump users symposium, pp. 113-144.
  29. Fox, R. et al., 2012, Fluid Mechanics, John Wiley and Sons Inc., pp. 494-588.

Cited by

  1. Relationship between Cavitation Incipient and NPSH Characteristic for Inverter Drive Centrifugal Pumps vol.18, pp.6, 2015, https://doi.org/10.5293/kfma.2015.18.6.076