DOI QR코드

DOI QR Code

Operational characteristics analysis of a 8 mH class HTS DC reactor for an LCC type HVDC system

  • Kim, S.K. (Changwon National University) ;
  • Go, B.S. (Changwon National University) ;
  • Dinh, M.C. (Changwon National University) ;
  • Kim, J.H. (Daejeon University) ;
  • Park, M. (Changwon National University) ;
  • Yu, I.K. (Changwon National University)
  • Received : 2015.01.20
  • Accepted : 2015.03.17
  • Published : 2015.03.31

Abstract

Many kinds of high temperature superconducting (HTS) devices are being developed due to its several advantages. In particular, the advantages of HTS devices are maximized under the DC condition. A line commutated converter (LCC) type high voltage direct current (HVDC) transmission system requires large capacity of DC reactors to protect the converters from faults. However, conventional DC reactor made of copper causes a lot of electrical losses. Thus, it is being attempted to apply the HTS DC reactor to an HVDC transmission system. The authors have developed a 8 mH class HTS DC reactor and a model-sized LCC type HVDC system. The HTS DC reactor was operated to analyze its operational characteristics in connection with the HVDC system. The voltage at both ends of the HTS DC reactor was measured to investigate the stability of the reactor. The voltages and currents at the AC and DC side of the system were measured to confirm the influence of the HTS DC reactor on the system. Two 5 mH copper DC reactors were connected to the HVDC system and investigated to compare the operational characteristics. In this paper, the operational characteristics of the HVDC system with the HTS DC reactor according to firing angle are described. The voltage and current characteristics of the system according to the types of DC reactors and harmonic characteristics are analyzed. Through the results, the applicability of an HTS DC reactor in an HVDC system is confirmed.

Keywords

References

  1. T. Hamajima, N. Hu, H. Ozcivan, S. Soeda, T. Yagai, and M. Tsuda, "Balanced three-phase distributions of tri-axial cable for transmission line," IEEE Trans. Appl. Supercond., vol. 19, pp. 1748-1751, 2009. https://doi.org/10.1109/TASC.2009.2018452
  2. J. Cho, K. D. Sim, J. H. Bae, H. J. Kim, J. H. Kim, K. C. Seong, H. M. Jang, C. Y. Lee, and D. Y. Koh, "Design and experimental results of a 3 phase 30 m HTS power cable," IEEE Trans. Appl. Supercond., vol. 16, pp. 1602-1605, 2006. https://doi.org/10.1109/TASC.2005.864321
  3. C. K. Kim, V. K. Sood, G. S. Jang, S. J. Lim, and S. J. Lee, HVDC transmission(power conversion applications in power systems), Wiley-IEEE Press, 2009.
  4. Y.J. Won, J.G. Kim, A.R. Kim, G.H. Kim, M. Park, I.K. Yu, K.D. Sim, J. Cho, S. Lee, K.W. Jeong, K. Watanabe, "Power system analysis of Hanlim superconducting HVDC system using real time digital simulator," Physica C, vol. 471, pp. 1290-1294, 2011. https://doi.org/10.1016/j.physc.2011.05.180
  5. H. Zhao, J. Jin, and X. Lu, "Advantage of HTS DC power transmission," IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, pp. 403-406, Sept, 2009.
  6. G. Venkataramanan, B. K. Johnson, "A superconducting DC transmission system based on VSC transmission technologies," IEEE Trans. Appl. Supercond., vol. 13, 2003.
  7. B.W. McConnell, "Applications of high temperature superconductors to direct current electric power transmission and distribution," IEEE Trans. Appl. Supercond., vol. 15, 2005.