DOI QR코드

DOI QR Code

Reliabilities of distances describing bolt placement for high strength steel connections

  • 투고 : 2014.10.02
  • 심사 : 2015.01.23
  • 발행 : 2015.04.10

초록

In the bolted connections, bolt placements are generally described and are generally made in the direction of design effects and in the perpendicular direction to design effects. In these both directions, the reliability of the distance of bolts to the edges of connection plate and the distance of bolts to each other is investigated for high strength steel connections built up with high strength bolts in this study. For this purpose, simple SL (bearing type shear connection) and SLP (bearing type shear connection for body-fit bolts) type steel connections with St 52 grade steel plates with 8 different thicknesses and with 8.8D grade high strength bolts (HV) were constituted and analyzed under H (Dead Loads+Live Loads+Snow Loads+Roof Loads) and HZ (H Loads+Wind Loads+Earthquake Loads) loadings. Geometric properties, material properties and design actions were taken as random variables. Monte Carlo Simulation method was used to compute failure risk and the first order second moment method was used to determine the reliability indexes of those different distances describing the placement of bolts. Results obtained from computations have been presented in graphics and in a Table. Then, they were compared with some values proposed by some structural codes. Finally, new equations were constituted for minimum and maximum values of distances describing bolt placement by regression analyses performed on those results.

키워드

참고문헌

  1. AISC Steel Construction Manual (2005), AISC American Institute of Steel Construction, 13th Edition, Chicago.
  2. As 4100 (1998), Steel Structures, Australian Standard.
  3. Basaga, H.B. and Bayraktar, A. (2006), "Reliability analysis of beams using finite element method", Proceedings of Seventh International Congress on Advances in Civil Engineering, Yildiz Technical University, Istanbul, Turkey.
  4. Basaga, H.B., Bayraktar, A., Kartal, M.E. and Haciefendioglu, K. (2007), "Deprem Etkisindeki Binalarin Guvenilirlik Analizi", 6. Ulusal Deprem Muhendisligi Konferansi, Suleyman Demirel Kultur Merkezi, ITU, Istanbul, 1(34), 391-398.
  5. Bayazit, M. and Oguz, B. (1998), Probability and Statistics for Engineers, 1st Edition, Birsen Yayinevi, Istanbul.
  6. Bayazit, M. (2006), Muhendislikte Guvenilirlik ve Risk Analizi, 1st edition, Birsen Yayinevi, Istanbul. (in Turkish)
  7. Bolandim, E., Beck, A. and Malite, M. (2013). "Bolted Connections in Cold-Formed Steel: Reliability Analysis for Rupture in Net Section", J. Struct. Eng., 139(Special Issue: Cold-Formed Steel Structures), 748-756. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000566
  8. BS 5950-1: (2000), Structural Use of Steelwork in Building. Part 1: Code of Practice for Design Rolled and Welded Sections, 7th edition.
  9. CAN/CSA-S16-01 (2001), National Standard of Canada, Limit States Design of Steel Structures, Canadian Standards Association, Mississauga, Ontario, Canada.
  10. Cardoso, J.B., Almeida, J.R., Dias, J.M., Coelho,P.G., (2008), "Structural reliability analysis using Monte Carlo Simulation and Neural Networks", Adv. Eng. Softw., 39, 505-513. https://doi.org/10.1016/j.advengsoft.2007.03.015
  11. Uzgider, E., Piroglu, F., Deren, H. and Caglayan, O. (2008), Celik Yapilar (Steel Structures), 3rd edition, Istanbul Caglayan Kitabevi.
  12. Eurocode 3 (2005), EN 1993-1-8: Design of steel structures - Part 1-8: Design of joints, Brussels.
  13. Huh, J. (1999), "Dynamic reliability analysis for nonlinear structures using stochastic finite element method", Ph.D. Thesis, The University of Arizona, USA.
  14. Huh, J. and Haldar, A. (2000), "Reliability estimation of buildings subjected to seismic excitation", Proceedings of 8th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, Indianapolis, USA.
  15. IS 800 (2007), Indian Standard, General Construction in Steel Code of Practice, 3rd Revision, Bureau of Indian Standards, New Delhi.
  16. Lee, S.Y. (2000), "Static and dynamic reliability analysis of frame and shear wall structural systems", Ph.D. Thesis, The University of Arizona, USA.
  17. Lee, S.Y. and Haldar, A. (2003), "Reliability of frame and shear wall structural systems. I-static loading", J. Struct. Eng., 129(2), 224-232. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(224)
  18. Omurtag, M.H. (2010), Mukavemet (Mechanics of Solids), 3rd edition, Birsen Yayinevi, Istanbul. (in Turkish)
  19. Nowak, A.S. and Collins, K.R. (2012), Reliability of Structures, 1st edition, McGraww-Hill, Singapore.
  20. Papadrakakis, M., Papadopoulos, V. and Lagaros, N.D. (1996), "Structural reliability analysis of elastic-plastic structures using neural networks and Monte Carlo simulation", Comp. Meth. Appl. Mech. Eng., 136, 145-163. https://doi.org/10.1016/0045-7825(96)01011-0
  21. Papadrakakis, M. and Lagaros, N.D. (2002), "Reliability-based structural optimization using neural networks and Monte Carlo simulation", Comp. Meth. Appl. Mech. Eng., 191, 3491-3507. https://doi.org/10.1016/S0045-7825(02)00287-6
  22. Papadrakakis, M., Tsompanakis, Y., Lagaros, N.D. and Fragiadakis, M. (2004), "Reliability based optimization of steel frames under seismic loading conditions using evolutionary computation", J. Theor. Appl. Mech. Polish Acad. Sci., 42(3), 585-608.
  23. Soong, T.T. and Grigoriu, M. (1993), Random Vibration of Mechanical and Structural Systems, Prentice-Hall, Englewood Cliffs, NY.
  24. Tsompanakis, Y. and Papadrakakis, M. (2000), "Efficient computational methods for large-scale structural optimization", Int. J. Comput. Eng. Sci., 1(2), 331-354. https://doi.org/10.1142/S146587630000015X
  25. TS648 (1980), Building Code for Steel Structures, Turkish Standard, 1st edition, Turk Standartlari Enstitusu Ankara.

피인용 문헌

  1. Seismic behavior of steel column-base-connection equipped by NiTi shape memory alloy vol.64, pp.1, 2015, https://doi.org/10.12989/sem.2017.64.1.109
  2. Comparative study of the resistance of bonded, riveted and hybrid assemblies; Experimental and numerical analyses vol.70, pp.4, 2015, https://doi.org/10.12989/sem.2019.70.4.467