Structural Engineering and Mechanics

  • 제54권1호
  • /
  • Pages.69-85
  • /
  • 2015
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical and finite element solution of a receding contact problem

  • Adiyaman, Gokhan (Department of Civil Engineering, Karadeniz Technical University) ;
  • Yaylaci, Murat (Department of Civil Engineering, Recep Tayyip Erdogan University) ;
  • Birinci, Ahmet (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2014.05.20
  • 심사 : 2014.11.06
  • 발행 : 2015.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a receding contact problem for an elastic layer resting on two quarter planes is considered. The layer is pressed by a stamp and distributed loads. It is assumed that the contact surfaces are frictionless and only compressive traction can be transmitted through the contact surfaces. In addition the effect of body forces are neglected. Firstly, the problem is solved analytically based on theory of elasticity. In this solution, the problem is reduced into a system of singular integral equations in which contact areas and contact stresses are unknowns using boundary conditions and integral transform techniques. This system is solved numerically using Gauss-Jacobi integral formulation. Secondly, two dimensional finite element analysis of the problem is carried out using ANSYS. The dimensionless quantities for the contact areas and the contact pressures are calculated under various distributed load conditions using both solutions. It is concluded that the position and the magnitude of the distributed load have an important role on the contact area and contact pressure distribution between layer and quarter plane contact surface. The analytic results are verified by comparison with finite element results.

키워드

참고문헌

  1. Aksogan, O., Akavci, S.S. and Becker, A.A. (1996), "A comparative study of the contact problem for an elastic layer supported by two elastic quarter planes", J. Facul. Eng. Arch. Cukurova Univ., 11, 25-31.
  2. Aksogan, O., Akavci, S.S. and Becker, A.A. (1997), "A comparative study of the contact problem for an elastic layer supported by two elastic quarter planes", J. Facul. Eng. Arch. Cukurova Univ., 12, 1-13.
  3. Anderson, T. (1982), The Boundary Element Method Applied to Two-Dimensional Contact Problems with Friction, Boundary Element Methods, (C.A. Edition Brebbia), Springer, Berlin, Germany.
  4. Cakiroglu, E. (2011), "The solution of an elastic layer resting on two quarter planes and loaded by means of rigid stamp and application of the artificial neural network method", PhD Thesis, Civil Engineering Department, Karadeniz Technical University, Trabzon, Turkey.
  5. Civelek, M.B. and Erdogan, E. (1974), "The axisymmetric double contact problem for a frictionless elastic layer", Int. J. Solid. Struct., 10(6), 639-659. https://doi.org/10.1016/0020-7683(74)90048-1
  6. Chan, S.K. and Tuba, I.S. (1971), "A finite element method for contact problems of solid bodies-1: theory and validation", Int. J. Mech. Sci., 13, 615-625. https://doi.org/10.1016/0020-7403(71)90032-4
  7. Chen, P. and Chen, S. (2012), "Contact behaviours of a rigid punch and a homogeneous half-space coated with a graded layer", Acta Mech., 223, 563-577. https://doi.org/10.1007/s00707-011-0581-0
  8. Comez, I., Birinci, A. and Erdol, R. (2004), "Double receding contact problem for a rigid stamp and two elastic layers", Euro. J. Mech.-A/Solid., 23, 301-309. https://doi.org/10.1016/j.euromechsol.2003.09.006
  9. Comez, I. (2013), "Contact problem of a functionally graded layer resting on a winkler foundation", Acta Mech., 224, 2833-2843 https://doi.org/10.1007/s00707-013-0903-5
  10. Delpero, T., Lepoittevin, G. and Sanchez, A. (2010), Finite Element Modeling with ANSYS, Centre of Structure Technologies, Swiss Federal Institute of Technology, Zurich, Swiss.
  11. El-Borgi, S., Abdelmoula, R. and Keer, L. (2006), "A receding contact plane problem between a functionally graded layer and a homogeneous substrate", Int. J. Solid. Struct., 46, 658-674.
  12. Erdogan, F. and Ratwani, F. (1974), "The contact problem for an elastic layer supported by two elastic quarter planes", J. Appl. Mech., 41(3), 673-678. https://doi.org/10.1115/1.3423369
  13. Erdogan, F., Gupta, G.D. and Cook, T.S. (1973), Numerical Solution of Singular Integral Equations in Methods of Analysis and Solution of Crack Problems, Noordhoff International, Leyden, Illinous, USA.
  14. Francavilla, A. and Zienkiewicz, O.C. (1975), "A note on numerical computation of elastic contact problems", Int. J. Numer. Meth. Eng., 17, 913-924.
  15. Garrido, J.A., Foces, A. and Paris, F. (1991), "B.E.M. applied to receding contact problems with friction", Math. Comput. Model., 15, 143-154. https://doi.org/10.1016/0895-7177(91)90060-K
  16. Garrido, J.A. and Lorenzana, A. (1998), "Receding contact problem involving large displacements using the BEM", Eng. Anal. Bound. Elem., 21, 295-303. https://doi.org/10.1016/S0955-7997(98)00018-6
  17. Gecit, M.R. (1986), "Axisymmetric contact problem for a semi-infinite cylinder and a half-space", Int. J. Eng. Sci., 24(8), 1245-1256. https://doi.org/10.1016/0020-7225(86)90054-6
  18. Gladwell, G.M.L. (1976), "On some unbounded contact problems in plane elasticity theory", J. Appl. Mech., 43, 263-267. https://doi.org/10.1115/1.3423821
  19. Johnson, K.L. (1987), Contact Mechanics, Cambridge University Press, Cambridge, England.
  20. Jing, H.S. and Liao, M.L. (1990), "An improved finite element scheme for elastic contact problems with friction", Comput. Struct., 35(5), 571-578. https://doi.org/10.1016/0045-7949(90)90385-F
  21. Kahya, V., Ozsahin, T.S., Birinci, A. and Erdol, R. (2007), "A receding contact problem for an anisotropic elastic medium consisting of a layer and a half plane", Int. J. Solid. Struct., 44, 5695-5710. https://doi.org/10.1016/j.ijsolstr.2007.01.020
  22. Keer, L.M., Dundurs, J. and Tasi, K.C. (1972), "Problems involving a receding contact between a layer and a half-space", J. Appl. Mech., 39, 1115-1120. https://doi.org/10.1115/1.3422839
  23. Oner, E. and Birinci, A. (2014), "Continuous contact problem for two elastic layers resting on elastic half infinite plane", J. Mech. Mater. Struct., 9(1), 105-119. https://doi.org/10.2140/jomms.2014.9.105
  24. Paris, F., Blazquez, A. and Canas, J. (1995), "Contact problems with nonconforming discretization using boundary element method", Comput. Struct., 57(5), 829-839. https://doi.org/10.1016/0045-7949(95)92007-5
  25. Paris, F., Foces, A. and Garrido, J.A. (1992), "Application of boundary element method to solve three-dimensional elastic contact problems without friction", Comput. Struct., 43(1), 19-30. https://doi.org/10.1016/0045-7949(92)90076-C
  26. Rhimi, M., El-Borgi, S. and Lajnef, N. (2011), "A double receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate", Mech. Mater., 43, 787-798. https://doi.org/10.1016/j.mechmat.2011.08.013
  27. Rhimi, M., El-Borgi, S., Ben Said, W. and Ben Jemaa, F. (2009), "A receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate", Int. J. Solid. Struct., 46(20), 3633-3642. https://doi.org/10.1016/j.ijsolstr.2009.06.008
  28. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Strut. Eng. Mech., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241
  29. Yaylaci, M., Oner, E. and Birinci, A. (2014), "Comparison between analytical and ANSYS calculations for a receding contact problem", J. Eng. Mech., 140(9), 04014070. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000781

피인용 문헌

  1. The investigation crack problem through numerical analysis vol.57, pp.6, 2016, https://doi.org/10.12989/sem.2016.57.6.1143
  2. A semianalytical and finite-element solution to the unbonded contact between a frictionless layer and an FGM-coated half-plane 2017, https://doi.org/10.1177/1081286517744600
  3. A receding contact problem of a layer resting on a half plane vol.64, pp.4, 2017, https://doi.org/10.12989/sem.2017.64.4.505
  4. On the receding contact between a two-layer inhomogeneous laminate and a half-plane vol.66, pp.3, 2018, https://doi.org/10.12989/sem.2018.66.3.329
  5. Numerical simulation of the constructive steps of a cable-stayed bridge using ANSYS vol.69, pp.3, 2015, https://doi.org/10.12989/sem.2019.69.3.269
  6. Damping and vibration response of viscoelastic smart sandwich plate reinforced with non-uniform Graphene platelet with magnetorheological fluid core vol.33, pp.6, 2015, https://doi.org/10.12989/scs.2019.33.6.891
  7. Finite element modeling of contact between an elastic layer and two elastic quarter planes vol.26, pp.2, 2020, https://doi.org/10.12989/cac.2020.26.2.107
  8. Frictional receding contact problem of a functionally graded layer resting on a homogeneous coated half-plane vol.90, pp.9, 2015, https://doi.org/10.1007/s00419-020-01712-4
  9. Examination of analytical and finite element solutions regarding contact of a functionally graded layer vol.76, pp.3, 2015, https://doi.org/10.12989/sem.2020.76.3.325
  10. Examination of contact problem between functionally graded punch and functionally graded layer resting on elastic plane vol.78, pp.2, 2021, https://doi.org/10.12989/sem.2021.78.2.135
  11. Influence of non-persistent joint sets on the failure behaviour of concrete under uniaxial compression test vol.28, pp.3, 2015, https://doi.org/10.12989/cac.2021.28.3.289