Advances in aircraft and spacecraft science

  • 제2권2호
  • /
  • Pages.183-198
  • /
  • 2015
  • /
  • 2287-528X(pISSN)
  • /
  • 2287-5271(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Thrust augmentation through after-burning in scramjet nozzles

  • Candon, Michael J. (School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University) ;
  • Ogawa, Hideaki (School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University) ;
  • Dorrington, Graham E. (School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University)
  • 투고 : 2014.09.24
  • 심사 : 2014.11.22
  • 발행 : 2015.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Scramjets are a class of hypersonic airbreathing engine that are associated with realizing the technology required for economical, reliable access-to-space and high-speed atmospheric transport. After-burning augments the thrust produced by the scramjet nozzle and creates a more robust nozzle design. This paper presents a numerical study of three parameters and the effect that they have on thrust augmentation. These parameters include the injection pressure, injection angle and streamwise injection position. It is shown that significant levels of thrust augmentation are produced based upon contributions from increased pressure, mass flow and energy in the nozzle. Further understanding of the phenomenon by which thrust augmentation is being produced is provided in the form of a force contribution breakdown, analysis of the nozzle flowfields and finally the analysis of the surface pressure and shear stress distributions acting upon the nozzle wall.

키워드

참고문헌

  1. Boyce, R.R., Tirtey, S.C., Brown, L., Creagh, M. and Ogawa, H. (2011), "SCRAMSPACE: scramjet-based access-to space systems", AIAA Paper 2011-2297, 17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, California, USA, April.
  2. Bulman, M. (2006), "Thrust Augmented Nozzle (TAN): the new paradigm for booster rockets", AIAA Paper 2006-4371, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Sacramento, USA, July.
  3. Chan, W.Y.K., Jacobs, P.A. and Mee, D.J. (2012), "Suitability of the k-$\omega$ turbulence model for scramjet flowfield simulations", Int. J. Numer. Meth. Fluid, 70(4), 493-514. https://doi.org/10.1002/fld.2699
  4. Cutler, A.D., Harding, G.C. and Diskin, G.S. (2001), "High frequency supersonic pulsed injection", AIAA Paper 2001-0517, 39th AIAA Aerospace Sciences Meeting and Exhibit, Nevada, USA, January.
  5. Davies, M. (2003), The Standard Handbook for Aeronautical and Astronautical Engineers, McGraw-Hill, New York, NY, USA
  6. Davis, R.L., Bulman, M.J. and Yam, C. (2006), "Numerical simulation of a thrust augmented rocket nozzle", AIAA Paper 2006-5205, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Sacramento, USA, July.
  7. Dorrington, G.E. (2002), "Rationale for supersonic afterburning rocket engines", J. Spacecraft. 40(2), 301-303.
  8. Drummond, J.P., Carpenter, M.H. and Riggins, D.W. (1991), Progress in Astronautics and Aeronautics, Sunset Books, Newark, OH, USA.
  9. Drummond, J.P., Diskin, G.S. and Cutler, A.D. (2006), Technologies for Propelled Hypersonic Flight, Scientific and Technical Aerospace Reports, Hampton, VA, USA.
  10. Evans, J.S. and Schexnayder, Jr., C.J. (1980), "Influence of chemical kinetics and unmiixedness on burning in supersonic hydrogen flames", AIAA J., 18(2), 188-193. https://doi.org/10.2514/3.50747
  11. Ferrante, F.A. and Chen F.F. (2006), "Thermal design and analysis of the Thrust Augmented Nozzle (TAN) injector", AIAA Paper 2006-4541, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Sacramento, USA, July.
  12. Ferri, A., Moretti, G. and Slutsky, S. (1965), "Mixing processes in supersonic combustion", J. Soc. Indus. Appl. Math., 13(1), 229-258. https://doi.org/10.1137/0113015
  13. Forde, S., Bulman, M. and Neill, T. (2006), "Thrust augmentation nozzle (TAN) concept for rocket engine booster applications", Acta Astronautica, 59(1-5),271-277. https://doi.org/10.1016/j.actaastro.2006.02.052
  14. Froning, H.D. (1989), "Investigation of very high energy rockets for future SSTO vehicles", Acta Astronautica, 14(4), 321-320.
  15. Maicke, B.A. and Majdalani, J. (2010), "Evaluation of CFD codes for hypersonic flow modeling", AIAA Paper 2010-7184, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Tennessee, USA, July.
  16. Manoha, E., Redonnet, S., Terracol, M. and Guenanff, G. (2004), "Numerical simulation of aerodynamic noise", 4th European Congress on Computational Methods in Applied Sciences and Engineering, Jyvaskyla, Finland, January.
  17. Mary, I. and Sagaut, P. (2002), "Large eddy simulation of flow around an airfoil near stall", AIAA J., 40(6), 1139-1145. https://doi.org/10.2514/2.1763
  18. McClinton, C.R. (2006), "X-43-Scramjet power breaks the hypersonic barrier dryden lectureship in research for 2006", AIAA Paper 2006-1, 44th AIAA Aerospace Sciences Meeting and Exhibit, Nevada, USA, January.
  19. Mutzman, R. and Murphy, S. (2011), "X-51 development: a chief engineer's perspective", 17t AIAA International Space Planes and Hypersonic Systems and Technologies Conference, San Francisco, USA, April.
  20. Ogawa, H. and Boyce, R.R. (2012), "Nozzle design optimisation for axisymmetric scramjets by using surrogate-assisted evolutionary algorithms", J. Propul. Pow., 28(6), 1324-1338. https://doi.org/10.2514/1.B34482
  21. Pandey, K.M. and Sivasakthivel, T. (2011), "CFD analysis of mixing and combustion of a scramjet combustor with a planer strut injector", Int. J. Environ. Sci. Develop., 2(2),102-108.
  22. Papamoschou, D. and Roshko, A. (1986), "Observation of supersonic free shear layers", AIAA Paper 1986-0162, AIAA 24th Aerospace Sciences Meeting, Nevada, USA, January.

피인용 문헌

  1. Thrust augmentation optimization through supersonic after-burning in scramjet engine nozzles via surrogate-assisted evolutionary algorithms vol.116, 2015, https://doi.org/10.1016/j.actaastro.2015.07.007
  2. Modelling a Hypersonic Single Expansion Ramp Nozzle of a Hypersonic Aircraft through Parametric Studies vol.11, pp.12, 2015, https://doi.org/10.3390/en11123449
  3. Enlarge duct length optimization for suddenly expanded flows vol.7, pp.3, 2020, https://doi.org/10.12989/aas.2020.7.3.203