Advances in aircraft and spacecraft science

  • 제2권2호
  • /
  • Pages.169-182
  • /
  • 2015
  • /
  • 2287-528X(pISSN)
  • /
  • 2287-5271(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An innovative approach for the numerical simulation of oil cooling systems

  • Carozza, A. (Fluid Dynamics Department, CIRA, ITALIAN AEROSPACE RESEARCH CENTRE)
  • 투고 : 2014.04.15
  • 심사 : 2014.11.02
  • 발행 : 2015.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Aeronautics engine cooling is one of the biggest problems that engineers have tried to solve since the beginning of human flight. Systems like radiators should solve this purpose and they have been studied extensively and various solutions have been found to aid the heat dissipation in the engine zone. Special interest has been given to air coolers in order to guide the air flow on engine and lower the high temperatures achieved by the engine in flow conditions. The aircraft companies need faster and faster tools to design their solutions so the development of tools that allow to quickly assess the effectiveness of an cooling system is appreciated. This paper tries to develop a methodology capable of providing such support to companies by means of some application examples. In this work the development of a new methodology for the analysis and the design of oil cooling systems for aerospace applications is presented. The aim is to speed up the simulation of the oil cooling devices in different operative conditions in order to establish the effectiveness and the critical aspects of these devices. Steady turbulent flow simulations are carried out considering the air as ideal-gas with a constant-averaged specific heat. The heat exchanger is simulated using porous media models. The numerical model is first tested on Piaggio P180 considering the pressure losses and temperature increases within the heat exchanger in the several operative data available for this device. In particular, thermal power transferred to cooling air is assumed equal to that nominal of real heat exchanger and the pressure losses are reproduced setting the viscous and internal resistance coefficients of the porous media numerical model. To account for turbulence, the k-${\omega}$ SST model is considered with Low- Re correction enabled. Some applications are then shown for this methodology while final results are shown in terms of pressure, temperature contours and streamlines.

키워드

참고문헌

  1. Alshare, A.A., Simon, T.W. and Strykowski, P.J. (2009), "Simulations of flow and heat transfer inca serpentine heat exchanger having dispersed resistance with porous-continuum and continuum models", Int. J. Heat Mass Tran., 53(5), 1088-1099. https://doi.org/10.1016/j.ijheatmasstransfer.2009.11.002
  2. Ansys Fluent 14.5 (2013), Commercially available CFD software package based on the Finite Volume cmethod, User's Guide, A product of Fluent Inc., Centerra Resource Park, 10 Cavendish Court, Lebanon, NH, USA.
  3. Carozza, A. and Mingione, G. (2013), "Preliminary thermal analysis about BE1 tractor engine components", CIRA-CF-13-022
  4. Hayes, A.M., Khan, J.A., Shaaban, A.H. and Spearing, I.G. (2008), "The thermal modeling of a matrix heat exchanger using a porous medium and the thermal non-equilibrium model", Int. J. Therm. Sci., 47(10), 1306-1315. https://doi.org/10.1016/j.ijthermalsci.2007.11.005
  5. Menter, F.R. (1994), "Two-equation Eddy-Viscosity turbulence models for engineering applications", AIAA J., 32(8), 1598-1605. https://doi.org/10.2514/3.12149
  6. Missirlis, D., Yakinthos, K., Palikaras, A., Katheder, K. and Goulas, A. (2005), "Experimental and numerical investigation of the flow field through a heat exchanger for aero-engine applications", Int. J. Heat Fluid Flow, 26(3), 440-458.. https://doi.org/10.1016/j.ijheatfluidflow.2004.10.003
  7. Missirlis, D., Donnerhack, S., Seite, O., Albanakis, C., Sideridis, C., Yakinthos, K. and Goulas, A. (2010), "Numerical development of a heat transfer and pressure drop porosity model for a heat exchanger for aero engine applications", Appl. Therm. Eng., 30(11), 1341-1350. https://doi.org/10.1016/j.applthermaleng.2010.02.021
  8. Narasimhan, A. and Sumuthra Raju, K.S. (2007), "Effect of variable permeability porous medium inter-connectors on the thermo-hydraulics of heat exchanger modeled as porous media", Int. J. Heat Mass Tran., 50(19), 4052-4062. https://doi.org/10.1016/j.ijheatmasstransfer.2007.01.058
  9. Pavel, B.I. and Mohamad, A.A. (2004), "An experimental and numerical study on heat transfer cenhancement for gas heat exchangers fitted with porous media", Int. J. Heat Mass Tran., 47(23), 4939-4952. https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.014
  10. Tomimura, T., Hamano, K., Honda, Y. and Echigo, R. (2004), "Experimental study on multi-layered type of cgas-to-gas heat exchanger using porous media", Int. J. Heat Mass Tran., 47(21), 4615-4623. https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.043

피인용 문헌

  1. Assessment of the performances of a heat exchanger in a light helicopter vol.2, pp.4, 2015, https://doi.org/10.12989/aas.2015.2.4.469