References
- 박주석, 김일수, 정영재, 손준식, 안영호 (1997) 유압유의 동점도와 부하변화에 따른 압력의 영향. In: 1997년 한국정밀공학회 추계학술대회논문집, pp 573-576 Park J-S, Kim I-S, Jeong Y-J, Son J-S, An Y-H (1997) The effects of dynamic viscosity and load of hydraulic oil on pressures. In: Proceedings of the Korean society for precision engineering conference 1997, pp 573-576
- 이승국, 오상우, 최혁진, 이승훈 (2011) 영상처리기법을 이용한 내압시험체의 변형도 추정에 관한 연구. 한국해양환경공학회지 14(4):287-292 Lee S-G, Oh S-W, Choi H-J, Lee S-H (2011) A study on the estimation of the deformation of object under hydrostatic pressure test using image processing. J Korean Soc Mar Environ Eng 14(4):287-292
- 이일영, 손단단 (2004) 차량용 유압감쇠기 내 기름의 유효 체적탄성계수에 미치는 실린더 벽 탄성의 영향. 한국자동차공학회논문집 12(5):187-197 Lee I-Y, Sun D (2004) Effects of cylinder shell elasticity on effective bulk modulus of oil in automotive hydraulic dampers. Trans KSAE 12(5):187-197
- 이재천, 정용승 (2003) 압력변동에 따른 유압유의 유효체적 탄성계수 측정에 대한 연구. 한국자동차공학회논문집 11(1):179-184 Lee J-C, Cheong Y-S (2003) A study on the estimation of effective bulk modulus hydraulic oil with pressure variation. Trans KSAE 11(1):179-184
- 전정식 (2004) 유압유의 종류와 선정방법. 유공학시스템학회논문집 1(2):1-8 Chun JS (2004) Selection procedure and classification of hydraulic oils. J Korea Fluid Power Sys Soc 1(2):1-8
- 최종수, 여태경, 김형우, 성기영, 박성재, 김성순, 홍섭 (2012) 심해저 망간단괴 파일럿 집광로봇 유압시스템. In: 2012년 한국해양과학기술협의회 공동학술대회, pp 1570-1573 Choi J-S, Yeu T-K, Kim H-W, Sung K-Y, Park S-J, Kim S-S, Hong S (2012) Hydraulic system of a pilot mining robot for deep-seabed manganese nodules. In: KAOSTS 2012, Daegu, pp 1570-1573
- 홍섭, 김형우, 여태경, 최종수, 민천홍, 윤석민, 김진호, 이민욱, 성기영, 이창호, 오재원, 김성순 (2013) 파일럿 채광로봇 미내로 개발 및 성능 실증실험. In: 2009년 한국해양공학회 추계학술대회, pp 60-63 Hong S, Kim H-W, Yeu T-K, Choi J-S, Min C-H, Yoon S-M, Kim J-H, Lee M-U, Sung K-Y, Lee C-H, Oh J-W, Kim S-S (2013) The development of pilot mining robot, MineRo, and sea performance tests. In: Proceedings of the Korea society of ocean engineers conference, pp 60-63
- 환경부 (2009) 국내 PCBs 함유(액상) 폐기물 규제기준 검토에 관한 연구, 환경부, pp 43-44 Ministry of environment of Korea (2009) A study on reviewing regulation standards of domestic PCB-bearing wastes, pp 43-44
- Hopkins V, Wilson DR, Bolze C (1964) Isothermal bulk modulus of selected fluids to 700F and 10,000 psig. ASME J Basic Eng 86(3):463-467 https://doi.org/10.1115/1.3653142
- Watton J (1989) Fluid power system (Modeling, simulation, analog and microcomputer control). Prentice Hall, 490 p
- Yu J, Chen Z, Lu Y (1994) The variation of oil effective bulk modulus with pressure in hydraulic system. ASME J Dyn Sys Meas Control 116(1):146-150 https://doi.org/10.1115/1.2900669