DOI QR코드

DOI QR Code

Performance monitoring of timber structures in underground construction using wireless SmartPlank

  • Received : 2014.11.08
  • Accepted : 2015.02.21
  • Published : 2015.03.25

Abstract

Although timber structures have been extensively used in underground temporary supporting system, their actual performance is poorly understood, resulting in potentially conservative and over-engineered design. In this paper, a novel wireless sensor technology, SmartPlank, is introduced to monitor the field performance of timber structures during underground construction. It consists of a wooden beam equipped with a streamlined wireless sensor node, two thin foil strain gauges and two temperature sensors, which enables to measure the strain and temperature at two sides of the beam, and to transmit this information in real-time over an IPv6 (6LowPan) multi-hop wireless mesh network and Internet. Four SmartPlanks were deployed at the London Underground's Tottenham Court Road (TCR) station redevelopment site during the Stair 14 excavation, together with seven relay nodes and a gateway. The monitoring started from August 2013, and will last for one and a half years until the Central Line possession in 2015. This paper reports both the short-term and long-term performances of the monitored timber structures. The grouting effect on the short-term performance of timber structures is highlighted; the grout injection process creates a large downward pressure on the top surface of the SmartPlank. The short and long term earth pressures applied to the monitored structures are estimated from the measured strains, and the estimated values are compared to the design loads.

Keywords

References

  1. Akyildiz, I.F. and Stuntebeck, E.P. (2006), "Wireless underground sensor networks: research challenges", Ad Hoc Networks, 4, 669-686. https://doi.org/10.1016/j.adhoc.2006.04.003
  2. Bennnet, P.J., Kobayashi, Y., Soga, K. and Wright, P. (2010a), "Wireless sensor network for monitoring of underground tunnel", Proceedings of the ICE, Geotechnical Engineering GE3, 163, 147-156.
  3. Bennnet, P.J, Soga, K., Wassell, I.J., Fidler, P., Abe, K., Kobayashi, Y. and Vanicek, M. (2010b), "Wireless sensor networks for underground railway applications: case studies in Prague and London", Smart Struct. Syst., 6(5-6), 619-639. https://doi.org/10.12989/sss.2010.6.5_6.619
  4. Bhalla, S, Yang, Y.W., Zhao, J. and Soh, C.K. (2005), "Structural health monitoring of underground facilities - Technological issues and challenges", Tunn. Undergr. Sp. Tech., 20, 487-500. https://doi.org/10.1016/j.tust.2005.03.003
  5. Bierman, R., Piper, P., Carstens, R. and Priest, G. (2013), "A revised timber elongate de-rating factor for platinum mines", Proceedings of the South African National Institute of Rock Engineering Symposium.
  6. Buchanan, A.H. (1990), "Bending strength of lumber", J. Struct. Eng. - ASCE, 116(5), 1213-1229. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1213)
  7. Daehnke, A., Watson, B.P., Roberts, D., Acheampong, E. and van Zyl, M. (2000), The impact of soft loading conditions on the performance of elongate support elements, Safety in Mines Research Advisory Committee, Final Project Report.
  8. Fiorelli, J. and Dias, A.A. (2003), "Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber", Mater. Rese., 6(2), 193-202. https://doi.org/10.1590/S1516-14392003000200014
  9. Hoult, N.A., Bennnet, P.J., Stoianov, I., Maksimovic, C., Middleton, C.R., Graham, N.J.G. and Soga, K. (2009), "Wireless sensor networks: creating 'Smart Infrastructure'", Proceedings of ICE, Civil Engineering, 162, 136-143. https://doi.org/10.1680/cien.2009.162.3.136
  10. Kavvadas, M.J. (2003), "Monitoring and modelling ground deformations during tunneling", Proceedings of the 11th FIG Symposium on Deformation Measurements, Santorini, Greece.
  11. Kennedy, G.A. and Bedford, M.D. (2014), "Underground wireless networking: A performance evaluation of communication standards for tunneling and mining", Tunn. Undergr. Sp. Tech., 43, 157-170. https://doi.org/10.1016/j.tust.2014.05.005
  12. Mackenzie ,C.N.P. (2014), "Traditional timbering in soft ground tunneling", The British Tunnelling Society.
  13. Mark, C. and Barczak, T.M. (2000), "Fundamentals of coal mine roof support", Proceedings of the New technology for coal mine roof support, Pittsburgh, USA.
  14. Piper, P.S. and Malan, D.F. (2008), "The in-situ performance of elongate support - myths and realities", Proceedings of the 6th International Symposium on Ground Support in Ming and Civil Engineering Construction, Cape town, South Africa.
  15. Robert, M.K.R., Riemann, K. and Jager, A.J. (1987), The performance characteristics of timber props, Chamber of Mines Research Organisation, Research Report.
  16. Stajano, F., Hoult, N.A., Wassell, I.J., Bennett, P.J., Middleton, C.R. and Soga, K. (2010), "Smart bridges, smart tunnels: transforming wireless sensor networks from research prototypes into robust engineering infrastructure", Ad Hoc Networks, 8, 872-888. https://doi.org/10.1016/j.adhoc.2010.04.002
  17. Szwedzicki, T. (1989), "Geotechnical assessment deficiencies in underground mining", Mining Sci. Technol., 9, 23-37. https://doi.org/10.1016/S0167-9031(89)90722-6
  18. Terzaghi, K. (1946), An introduction to tunnel geology, in Rock Tunnelling with Steel Supports, (Eds., Proctor R.V. and White T.L.), The Commercial Shearing and Stamping Co, Youngstown, Ohio, USA.
  19. Yeow, H.C., Nicholson, D. and Man, C.L. (2014), "Application of observational method at Crossrail Tottenham Court Road station, UK", Geotech. Eng., 167(2), 182-193. https://doi.org/10.1680/geng.13.00035

Cited by

  1. Infrastructure sensing vol.6, pp.4, 2016, https://doi.org/10.1098/rsfs.2016.0023
  2. Power-efficient piezoelectric fatigue measurement using long-range wireless sensor networks vol.28, pp.9, 2015, https://doi.org/10.1088/1361-665x/ab2c46
  3. Vision-based full-field panorama generation by UAV using GPS data and feature points filtering vol.25, pp.5, 2015, https://doi.org/10.12989/sss.2020.25.5.631