Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A statistical framework with stiffness proportional damage sensitive features for structural health monitoring

  • Balsamo, Luciana (Department of Civil Engineering and Engineering Mechanics, Columbia University) ;
  • Mukhopadhyay, Suparno (Department of Civil Engineering and Engineering Mechanics, Columbia University) ;
  • Betti, Raimondo (Department of Civil Engineering and Engineering Mechanics, Columbia University)
  • Received : 2014.11.21
  • Accepted : 2015.02.05
  • Published : 2015.03.25
⟨ Previous Next ⟩

Abstract

A modal parameter based damage sensitive feature (DSF) is defined to mimic the relative change in any diagonal element of the stiffness matrix of a model of a structure. The damage assessment is performed in a statistical pattern recognition framework using empirical complementary cumulative distribution functions (ECCDFs) of the DSFs extracted from measured operational vibration response data. Methods are discussed to perform probabilistic structural health assessment with respect to the following questions: (a) "Is there a change in the current state of the structure compared to the baseline state?", (b) "Does the change indicate a localized stiffness reduction or increase?", with the latter representing a situation of retrofitting operations, and (c) "What is the severity of the change in a probabilistic sense?". To identify a range of normal structural variations due to environmental and operational conditions, lower and upper bound ECCDFs are used to define the baseline structural state. Such an approach attempts to decouple "non-damage" related variations from damage induced changes, and account for the unknown environmental/operational conditions of the current state. The damage assessment procedure is discussed using numerical simulations of ambient vibration testing of a bridge deck system, as well as shake table experimental data from a 4-story steel frame.

Keywords

References

  1. Balsamo, L., Mukhopadhyay, S., Betti, R. and Lus, H. (2013a), "Damage detection using flexibility proportional coordinate modal assurance criterion", Proceedings of the 31stIMAC, Garden Grove, USA, February.
  2. Balsamo, L., Mukhopadhyay, S., Betti, R. and Lus, H. (2013b), "Modal parameter based damage detection in operational modal analysis: A statistical pattern recognition approach", Proceedings of the 11th International Conference on Structural Safety and Reliability, New York, USA, June.
  3. Balsamo, L., Betti, R. and Beigi, H.(2014), "A structural health monitoring strategy using cepstral features", J. Sound Vib., 333(19), 4526-4542. https://doi.org/10.1016/j.jsv.2014.04.062
  4. Duan, Z., Yan, G., Ou, J. and Spencer, B.F. (2007), "Damage detection in ambient vibration using proportional flexibility matrix with incomplete measured DOFs", Struct. Control. Health Monit., 14(2), 186-196. https://doi.org/10.1002/stc.149
  5. Farrar, C.R., Doebling, S. and Nix, D.A. (2001), "Vibration-based structural damage identification", Philos. T. R. Soc. A, 359(1778), 131-149. https://doi.org/10.1098/rsta.2000.0717
  6. Farrar, C.R. and Worden, K. (2013), Structural Health Monitoring: A Machine Learning Perspective, John Wiley & Sons, Ltd., Chichester, UK.
  7. Fraraccio, G., Brugger, A. and Betti, R. (2008), "Identification and damage detection in structures subjected to base excitation", Exp. Mech., 48(4), 521-528. https://doi.org/10.1007/s11340-008-9124-6
  8. Friswell, M.I. (2007), "Damage identification using inverse methods", Philos. T. R. Soc. A, 365, 393-410. https://doi.org/10.1098/rsta.2006.1930
  9. Hanselmann, A., Schrempf, O.C. and Hanebeck, U.D. (2007), "Optimal parametric density estimation by minimizing an analytic distance measure", Proceedings of the 10th International Conference on Information Fusion.
  10. Hong, A.L., Ubertini, F. and Betti, R. (2013), "New stochastic subspace approach for system identification and its application to long-span bridges", J. Eng. Mech. - ASCE, 139(6), 724-736. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000524
  11. Huang, Q., Gardoni, P. and Hurlebaus, S. (2012), "A probabilistic damage detection approach using vibration-based nondestructive testing", Struct. Saf., 38(2012), 11-21. https://doi.org/10.1016/j.strusafe.2012.01.004
  12. Katafygiotis, L.S. and Beck, J.L. (1998), "Updating models and their uncertainties. II: Model identifiability", J. Eng. Mech. - ASCE, 124(4), 463-467. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:4(463)
  13. Kim, J. and Stubbs, N. (2003), "Nondestructive crack detection algorithm for full-scale bridges", J. Struct. Eng. - ASCE, 129(10), 1358-1366. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1358)
  14. Lukaszyk, S. (2004), "A new concept of probability metric and its applications in approximation of scattered data sets", Comput. Mech., 33(4), 299-304. https://doi.org/10.1007/s00466-003-0532-2
  15. Lus, H., Betti, R. and Longman, R.W. (1999), "Identification of linear structural systems using earthquake-induced vibration data", Earthq. Eng. Struct. D., 28, 1449-1467. https://doi.org/10.1002/(SICI)1096-9845(199911)28:11<1449::AID-EQE881>3.0.CO;2-5
  16. Mukhopadhyay, S., Lus, H., Hong, A.L. and Betti, R. (2012), "Propagation of mode shape errors in structural identification", J. Sound Vib., 331, 3961-3975. https://doi.org/10.1016/j.jsv.2012.04.012
  17. Mukhopadhyay, S., Lus, H. and Betti, R. (2014a), "Modal parameter based structural identification using input-output data: Minimal instrumentation and global identifiability issues", Mech. Syst. Signal Pr., 45(2), 283-301. https://doi.org/10.1016/j.ymssp.2013.11.005
  18. Mukhopadhyay, S., Lus, H. and Betti, R. (2014b), "Structural identification with incomplete instrumentation and global identifiability requirements under base excitation", Struct. Control. Health Monit., DOI: 10.1002/stc.1732.
  19. Nayeri, R.D., Masri, S.F. and Chassiakos, A.G. (2007), "Application of structural health monitoring techniques to track structural changes in a retrofitted building based on ambient vibration", J. Eng. Mech. - ASCE, 133(12), 1311-1325. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:12(1311)
  20. Sohn, H. (2007), "Effects of environmental and operational variability on structural health monitoring", Philos. T. R. Soc. A, 365(1851), 539-560. https://doi.org/10.1098/rsta.2006.1935
  21. Soyoz, S. and Feng, M.Q. (2009), "Long-term monitoring and identification of bridge structural parameters", Comput-Aided Civ. Inf., 24(2), 82-92. https://doi.org/10.1111/j.1467-8667.2008.00572.x
  22. Yuen, K.V., Beck, J.L. and Katafygiotis, L.S. (2006), "Efficient model updating and health monitoring methodology using incomplete modal data without mode matching", Struct. Control. Health Monit., 13(1), 91-107. https://doi.org/10.1002/stc.144

Cited by

  1. Structural identification with incomplete instrumentation and global identifiability requirements under base excitation vol.22, pp.7, 2015, https://doi.org/10.1002/stc.1732
  2. Probabilistic Structural Health Assessment with Identified Physical Parameters from Incomplete Measurements vol.2, pp.3, 2016, https://doi.org/10.1061/AJRUA6.0000838
  3. Data-based structural health monitoring using small training data sets vol.22, pp.10, 2015, https://doi.org/10.1002/stc.1744
  4. Structural identification with incomplete output-only data and independence of measured information for shear-type systems vol.45, pp.2, 2016, https://doi.org/10.1002/eqe.2627
  5. Anomaly detection of bridge health monitoring data based on KNN algorithm vol.39, pp.4, 2015, https://doi.org/10.3233/jifs-189009