Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Research and practice of health monitoring for long-span bridges in the mainland of China

  • Li, Hui (Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), The Ministry of Education) ;
  • Ou, Jinping (Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), The Ministry of Education) ;
  • Zhang, Xigang (CCCC Highway Consultants CO., Ltd.) ;
  • Pei, Minshan (CCCC Highway Consultants CO., Ltd.) ;
  • Li, Na (CCCC Highway Consultants CO., Ltd.)
  • Received : 2014.11.27
  • Accepted : 2015.01.25
  • Published : 2015.03.25
⟨ Previous Next ⟩

Abstract

The large number of long-span bridges constructed in China motivates the applications of structural health monitoring (SHM) technology. Many bridges have been equipped with sophisticated SHM systems in the mainland of China and in Hong Kong of China. Recently, SHM technology has been extended to field test systems. In this view, SHM can serve as a tool to develop the methods of life-cycle performance design, evaluation, maintenance and management of bridges; to develop new structural analysis methods through validation and feedback from SHM results; and to understand the behavior of bridges under natural and man-made disasters, rapidly assess the damage and loss of structures over large regions after disasters, e.g., earthquake, typhoon, flood, etc. It is hoped that combining analytical methods, numerical simulation, small-scale tests and accelerated durability tests with SHM could become the main engine driving the development of bridge engineering. This paper demonstrates the above viewpoint.

Keywords

References

  1. Ansari, F. (2008), "Practical implementation of optical fiber sensors in civil structural health monitoring", J. Intel. Mat. Syst. Str., 19(10), 1163-1172. https://doi.org/10.1177/1045389X07083653
  2. Bao, X.,Webb, D.J. and Jackson, D.A. (1993), "32-km distributed temperature sensor based on Brillouin loss in an optical fiber", Opt. Lett., 18(18), 1561-1563. https://doi.org/10.1364/OL.18.001561
  3. Bao, Y., Beck, J.L. and Li, H. (2011), "Compressive sampling for accelerometer signals in structural health monitoring", Struct. Health Monit., 10(3), 235-246. https://doi.org/10.1177/1475921710373287
  4. Bao, Y., Li, H., An, Y. and Ou, J. (2012), "Dempster-Shafer evidence theory approach to structural damage detection", Struct. Health Monit., 11(1), 13-26. https://doi.org/10.1177/1475921710395813
  5. Bao, Y., Wu, F., Zhu, X., Zhang, X. and Li, H. (2012), "A mobile wireless sensor-based structural health monitoring technique", Workshop on Civil Structural Health Monitoring (CSHM-4), Berlin, Germany.
  6. Bao, Y., Li, H., Sun, X., Yan, Y. and Ou, J.P. (2013), "Compressive sampling-based data loss recovery for wireless sensor networks used in civil structural health monitoring", Struct. Health Monit., 12(1), 78-95. https://doi.org/10.1177/1475921712462936
  7. Bao, Y., Li, H., Zhang, F. and Ou, J. (2013), "Compressive sampling based approach for identification of moving loads distribution on cable-stayed bridges", Proceedings of the SPIE Smart Structures/NDE, 11-15 March, San Diego, California USA.
  8. Chen, W.L., Li, H., Ou, J.P and Li, F.C. (2013), "Numerical simulation of vortex-induced vibrations of inclined cables under different wind profiles", J. Bridge Eng. -ASCE, 18(1), 42-53. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000323
  9. Chen, Z.C., Li, H. and Bao, Y. (2014), "Computer vision based approach for identification of moving loads distribution on long-span bridges", Proceedings of the 5th Asia-Pacific Workshop on Structural Health Monitoring, Shenzhen, China, December 4-5, 2014 (CD-ROM).
  10. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1996), Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review, LA--13070-MS, Los Alamos National Laboratory, New Mexico, USA.
  11. Dong, Y.K., Ba, D.X., Jiang, T.F., Zhou, D.W., Zhang, H.Y., Zhu, C.Y., Lu, Z.W, Li, H., Chen, L. and Bao, X.Y. (2013), "High-spatial-resolution fast BOTDA for dynamic strain measurement based on differential double-pulse and second-order sideband of Modulation", IEEE Photonics J., 5(3), 2600407. https://doi.org/10.1109/JPHOT.2013.2267532
  12. Faber, M.H., Engelund, S. and Rachwits, R. (2003), "Aspects of parallel wire cable reliability", Struct. Saf., 25(2), 201-225. https://doi.org/10.1016/S0167-4730(02)00057-7
  13. Gu, Y.M., Li, S.L, Li, H. and Guo, Z.M. (2014), "A novel Bayesian extreme value distribution model of vehicle loads incorporating de-correlated tail fitting: Theory and application to the Nanjing 3rd Yangtze River Bridge", Eng. Struct., 59, 386-392. https://doi.org/10.1016/j.engstruct.2013.10.029
  14. Ko, J.M., Ni, Y.Q., Zhou, H.F. et al. (2009), "Investigation concerning structural health monitoring of an instrumented cable-stayed bridge", Struct. Infrastruct. E., 5(6), 497-513. https://doi.org/10.1080/15732470701627893
  15. Koh, H.M., Lee, H.S., Kim, S.K. and Choo, J.F. (2009), Monitoring of bridges in Korea, Chapter 124 in Encyclopedia of Structural Health Monitoring, (Eds., C. Boller, F.K. Chang and Y. Fujino), John Wiley & Sons, Ltd.
  16. Laima, S.J., Li, H., Chen, W.L and Li, F.C. (2013), "Investigation and control of vortex-induced vibration of twin box girders", J. Fluid. Struct., 39, 205-221. https://doi.org/10.1016/j.jfluidstructs.2012.10.009
  17. Lan, C.M., Li, H. and Ou, J.P. (2011), "Traffic load modeling based on structural health monitoring data", Struct. Infrastruct. E., 7(5), 379-386. https://doi.org/10.1080/15732470902726809
  18. Li, H., Bao, Y. and Ou, J. (2008), "Structural damage identification based on integration of information fusion and Shannon entropy", Mech. Syst. Signal Pr., 22, 1427-1440. https://doi.org/10.1016/j.ymssp.2007.11.025
  19. Li, H., Laima, S.J., Zhang, Q.Q., Li, N. and Liu, Z.Q. (2014), "Field monitoring and validation of vortex-induced vibrations of a long-span suspension bridge", J. Wind Eng. Ind. Aerod., 124, 54-67. https://doi.org/10.1016/j.jweia.2013.11.006
  20. Li, H., Ou, J.P. and Zhou, Z. (2009). "Application of optical fibre Bragg gatings sensing technology-based smart stay cables", Opt. Laser. Eng., 47(10), 1077-1084. https://doi.org/10.1016/j.optlaseng.2009.04.016
  21. Li, H., Huang, Y., Ou, J. and Bao, Y. (2011), "Fractal dimension-based damage detection method for beams with a uniform cross-section", Comput. -.Aided Civil Infrastruct. Eng., 26(3), 190-206. https://doi.org/10.1111/j.1467-8667.2010.00686.x
  22. Li, H., Laima, S.J., Ou, J., Zhao, X.F., Zhou, W.S., Yu, Y., Li, N. and Liu, Z.Q. (2011), "Investigation of vortex-induced vibration of a suspension bridge with two separated steelbox girders based on field measurements", Eng. Struct., 33(6),1894-1907. https://doi.org/10.1016/j.engstruct.2011.02.017
  23. Li, H., Lan, C.M., Ju, Y. and Li, D.S. (2012), "Experimental and numerical study of the fatigue properties of corroded parallel wire cables", J. Bridge Eng. -ASCE, 17(2), 211-220. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000235
  24. Li, H., Zhang, F.J. and Jin, Y.Z. (2014), "Real-time identification of the time-varying tension of stay cables with monitored cable transversal acceleration", Struct. Control Health Monit., 21(7), 1100-1117. https://doi.org/10.1002/stc.1634
  25. Lynch, J. and Loh, K.J. (2005), "A summary review of wireless sensors and sensor networks for structuralhealth monitoring", Shock Vib. Digest, 38(2), 91-128. https://doi.org/10.1177/0583102406061499
  26. Ou, J.P. and Li, H. (2010), "Structural health monitoring in mainland China: review and future trends", Struct. Health Monit., 9(3), 219-231. https://doi.org/10.1177/1475921710365269
  27. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003), A review of structural health monitoring literature: 1996-2001, Laboratory Report, LA-13976-MS, Los Alamos National Laboratory, New Mexico, USA.
  28. Spencer Jr., B.F., Ruiz-Sandoval, M. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Control Health Monit., 11, 349-368. https://doi.org/10.1002/stc.48
  29. Yang. Y.C., Li, S.L., Nagarajaiah, S., Li, H. and Zhou, P. (2015), "Real-time output-only identification of time-varying cable tension via complexity pursuit", J. Struct. Eng. -ASCE, (accepted).
  30. Yu, Y., Ou, J., Zhang, J, Zhang, C. and Li, L. (2009), "Development of wireless MEMS inclination sensor system for swing monitoring of large scale hook structures", IEEE T. Ind. Electron., 56(4), 1072-1078. https://doi.org/10.1109/TIE.2009.2012469
  31. Zhang, F.J. (2013), Identification and modeling approaches of tension in stay cables and vehicles on cable-stayed bridges, Ph.D. Thesis of Harbin Institute of Technology.
  32. Zhou, Z. and Ou, J. (2009), "R&D of optical fiber based sensors and their applications", Proceedings of the SEM 2009 Annual Conference, Albuquerque, New Mexico, June 1 -4, 2009, USA.

Cited by

  1. Structural health monitoring system for Sutong Cable-stayed Bridge vol.18, pp.2, 2016, https://doi.org/10.12989/sss.2016.18.2.317
  2. Fatigue characteristics of distributed sensing cables under low cycle elongation vol.18, pp.6, 2016, https://doi.org/10.12989/sss.2016.18.6.1203
  3. Field monitoring of the train-induced hanger vibration in a high-speed railway steel arch bridge vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.1107
  4. A hybrid self-adaptive Firefly-Nelder-Mead algorithm for structural damage detection vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.957
  5. Structural Risk Assessment and Mitigation for Low- to Mid-Rise Residential Buildings in China vol.3, 2017, https://doi.org/10.3389/fbuil.2017.00037
  6. Computer vision and deep learning–based data anomaly detection method for structural health monitoring pp.1741-3168, 2018, https://doi.org/10.1177/1475921718757405
  7. Vibration Characteristics of Underground Structure and Surrounding Soil Underneath High Speed Railway Based on Field Vibration Tests vol.2018, pp.1875-9203, 2018, https://doi.org/10.1155/2018/3526952
  8. Wind characteristics and responses of Xihoumen Bridge during typhoons based on field monitoring vol.9, pp.1, 2019, https://doi.org/10.1007/s13349-019-00325-y
  9. Technical Specifications of Structural Health Monitoring for Highway Bridges: New Chinese Structural Health Monitoring Code vol.4, pp.None, 2015, https://doi.org/10.3389/fbuil.2018.00010
  10. An integrated structural health monitoring system for the Xijiang high-speed railway arch bridge vol.21, pp.5, 2015, https://doi.org/10.12989/sss.2018.21.5.611
  11. Localisation of embedded water drop in glass composite using THz spectroscopy vol.21, pp.6, 2018, https://doi.org/10.12989/sss.2018.21.6.751
  12. Compressive-sensing data reconstruction for structural health monitoring: a machine-learning approach vol.19, pp.1, 2020, https://doi.org/10.1177/1475921719844039
  13. Deep learning for data anomaly detection and data compression of a long‐span suspension bridge vol.35, pp.7, 2015, https://doi.org/10.1111/mice.12528
  14. Smart properties of carbon nanotube-epoxy composites vol.234, pp.11, 2020, https://doi.org/10.1177/1464420720942934
  15. Design of a new low-cost unmanned aerial vehicle and vision-based concrete crack inspection method vol.19, pp.6, 2015, https://doi.org/10.1177/1475921719898862