Earthquakes and Structures

  • 제8권3호
  • /
  • Pages.541-553
  • /
  • 2015
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An Ideal strain gage placement plan for structural health monitoring under seismic loadings

  • Vafaei, Mohammadreza (Faculty of Civil Engineering, Universiti Teknologi Malaysia) ;
  • Alih, Sophia C. (Faculty of Civil Engineering, Universiti Teknologi Malaysia)
  • 투고 : 2013.12.27
  • 심사 : 2014.06.26
  • 발행 : 2015.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Structural Health Monitoring (SHM) systems can provide valuable information regarding the safety of structures during and after ground motions which can be used by authorities to reduce post-earthquake hazards. Strain gages as a key element play an important role in the success of SHM systems. Reducing the number of required strain gages while keeping the efficiency of SHM system not only can reduce the cost of structural health monitoring but also avoids storage and process of uninformative data. In this study, a method based on performance based seismic design of structures is proposed for ideal placement of stain gages in structures. The robustness and efficiency of the proposed method is demonstrated through installation of strain gages on an Airport Traffic Control (ATC) Tower. The obtained results show that the number of required strain gages decrease significantly.

키워드

참고문헌

  1. Chen, X., Li, J. and Cheang, J. (2010), "Seismic performance analysis of Wenchuan hospital structure with viscous dampers", Struct. Des. Tall Spec. Build., 19(4), 397-419. https://doi.org/10.1002/tal.603
  2. Computers and Structures, Inc. (2006), Perform 3D-Version 4: Nonlinear analysis and performance assessment for 3d structures, User Guide, Berkeley.
  3. FEMA (2000), Pre-standard and commentary for the seismic rehabilitation of buildings, FEMA 356, Washington D.C., Federal Emergency Management Agency.
  4. Flynn, E.B. and Todd, M.D. (2010), "A Bayesian approach to optimal sensor placement for structural health monitoring with application to active sensing", Mech. Syst. Sig. Pr., 24(4), 891-903. https://doi.org/10.1016/j.ymssp.2009.09.003
  5. Li, Z.N., Tang, J. and Li, Q.S. (2004), "Optimal sensor locations for structural vibration measurements", Appl. Acoust., 65(8), 807-818. https://doi.org/10.1016/j.apacoust.2003.12.007
  6. Liu, W., Gao, W.C., Sun, Y. and Xu, M.J. (2008), "Optimal sensor placement for spatial structure based on genetic algorithms", J. Sound Vib., 317(1), 175-189. https://doi.org/10.1016/j.jsv.2008.03.026
  7. Papadimitriou, C. (2004), "Optimal sensor placement methodology for parametric identification of structural systems", J. Sound Vib., 278(4), 923-947. https://doi.org/10.1016/j.jsv.2003.10.063
  8. Skjaerbaek, P.S. and Nielsen, S.R.K. (1996), "Identification of damage in reinforced concrete structures from earthquake records-optimal location of sensors", Soil Dyn. Earthq. Eng., 15(6), 347-358. https://doi.org/10.1016/0267-7261(96)00018-8
  9. Udwadia, F.E. (1994), "Methodology for optimum sensor locations for parameter identification in dynamic systems", J. Eng. Mech., 120(2), 368-390. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:2(368)
  10. Vafaei, M., Adnan, A.B. and Rahman, A.B.A. (2014), "Seismic performance evaluation of an airport traffic control tower through linear and nonlinear analysis", Struct. Infrastr. Eng., 10(8), 963-975. https://doi.org/10.1080/15732479.2013.774030
  11. Xie, Q. and Xue, S.T. (2006), "An optimal sensor placement algorithm for structural health monitoring", Proceeding of the Second International Conference on Structural Health Monitoring of Intelligent Infrastructure, Shenzhen, China
  12. Zekioglu, A., Willford, M., Jin, L. and Melek, M. (2007), "Case study using the Los Angeles tall buildings structural design council guidlines: 40-story concrete core wall building", Struct. Des. Tall Spec. Build., 16(5), 583-597. https://doi.org/10.1002/tal.434
  13. Zhou, X.Q., Xia, Y. and Hao, H. (2013), "Sensor placement for structural damage detection considering measurement uncertainties", Adv. Struct. Eng., 16(5), 899-908. https://doi.org/10.1260/1369-4332.16.5.899

피인용 문헌

  1. 3D sensor placement strategy using the full-range pheromone ant colony system vol.25, pp.7, 2016, https://doi.org/10.1088/0964-1726/25/7/075003
  2. Identification of Static Loading Conditions Using Piezoelectric Sensor Arrays vol.85, pp.1, 2015, https://doi.org/10.1115/1.4038426
  3. Comparison between cyclic response of RC columns transversely reinforced with FRP strips and carbon steel vol.513, pp.None, 2015, https://doi.org/10.1088/1757-899x/513/1/012021