Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on Heat Transfer Performance of Heating Medium Oil Fluidized Bed Heat Exchanger

열매체유 유동층 열교환기의 전열성능에 대한 실험적 연구

  • Park, Sang-Il (Energy Efficiency Research Division, Korea Institute of Energy Research) ;
  • Ko, Chang-Bok (Energy Efficiency Research Division, Korea Institute of Energy Research) ;
  • Lee, Young-Soo (Energy Efficiency Research Division, Korea Institute of Energy Research)
  • 박상일 (한국에너지기술연구원 에너지효율연구본부) ;
  • 고창복 (한국에너지기술연구원 에너지효율연구본부) ;
  • 이영수 (한국에너지기술연구원 에너지효율연구본부)
  • Received : 2014.12.05
  • Accepted : 2015.01.20
  • Published : 2015.03.10
Download PDF
⟨ Previous Next ⟩

Abstract

The heat transfer performance of heating medium oil fluidized bed heat exchanger was measured. The operation variables were air flow rate, air inlet temperature, moisture content, water flow rate and water inlet temperature. The outside heat transfer coefficient was determined from the heat exchanger experiment and its experimental correlation was determined as a function of air velocity and viscosity of heating medium oil. Effect of viscosity was well agreed with the previous studies. Errors of the correlation equation was less than about 10% for outside heat transfer coefficient developed in this study when compared with the measured value. Hot water with the temperature greater than $77^{\circ}C$ could be produced by using the heating medium oil fluidized bed heat exchanger.

Keywords

References

  1. Kim, D. K., Park, S. I., Kim, H. D., and Lee, S. K., 2001, A study on the heat recovery from boiler exhaust gas with multi-stage water-fluidized-bed heat exchanger, Trans. Korean Soc. Mech. Eng. B, Vol. 25, No. 12, pp. 1776-1783. https://doi.org/10.22634/KSME-B.2001.25.12.1776
  2. Kim, S. D. and Kang, Y., 1997, Heat and mass transfer in three-phase fluidized-bed reactors-an overview, Chemical. Engineering. Science, Vol. 52, No. 21-22, pp. 3639-3660. https://doi.org/10.1016/S0009-2509(97)00269-8
  3. Molytherm heat transfer oil product catalog, MolyTech co., LTD.
  4. Holman, J. P., 1972, Heat transfer, International Student Edition.
  5. Baker, C. G. J., Armstrong, E. R., and Bergougnou, M. A., 1978, Heat transfer in three-phase fluidized beds, Powder Technol., Vol. 21, pp. 195-204. https://doi.org/10.1016/0032-5910(78)80089-8
  6. Kim, S. D. and Laurent, A., 1991, The state of knowledge on heat transfer in three-phase fluidized beds, International Chemical Engineering, Vol. 31, No. 2, pp. 284-302.

Cited by

  1. Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2015 vol.28, pp.6, 2016, https://doi.org/10.6110/KJACR.2016.28.6.256