동력기계공학회지 (Journal of Power System Engineering)

  • 제19권1호
  • /
  • Pages.19-23
  • /
  • 2015
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

5공 압력프로브의 측정에 의한 Gun식 가스버너의 스월유동장 고찰

Investigation of the Swirling Flow Fields of a Gun-Type Gas Burner by the Measurement of a Five-Hole Pressure Probe

  • 김장권 (군산대학교 동력기계시스템공학과) ;
  • 오석형 (군산대학교 기계공학부)
  • Kim, Jang-Kweon (Department of Power System Engineering, Kunsan National University) ;
  • Oh, Seok-Hyung (School of Mechanical Engineering, Kunsan National University)
  • 투고 : 2014.06.09
  • 심사 : 2014.10.27
  • 발행 : 2015.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The swirling flow fields of a gun-type gas burner(GTGB) without a combustion chamber were measured by a straight-type five-hole pressure probe(FHPP) under the cold flow condition. The three kinds of velocity components and the static pressure were calculated by using a non-nulling calibration method covering the velocity reduction performance of the effective flow attack angle of ${\pm}80^{\circ}$. As a result, the velocity and static pressure measured by a FHPP comparatively shows the better performance on the swirling flow of a GTGB than those measured by X-probe.

키워드

참고문헌

  1. J. K. Kim, 2009, "Investigation on the Turbulent Swirling Flow Field within the Combustion Chamber of a Gun-Type Gas Burner", Trans. of the KSME(B), Vol. 33, No. 9, pp. 666-673.
  2. J. K. Kim, 2008, "Investigation of the Turbulence Characteristics in the Swirling Flow of a Gun-Type Gas Burner with Two Different Hot-Wire Probes", J. of Mechanical Science and Technology, Vol. 22, pp. 180-189. https://doi.org/10.1007/s12206-007-1022-9
  3. J. K. Kim and K. J. Jeong, 2006, "Investigation on the Turbulent Flow Field Characteristics of a Gun-Type Gas Burner with and without a Duct", J. of the KSPSE, Vol. 10, No. 4, pp. 17-24.
  4. J. K. Kim and K. J. Jeong, 2006, "Measurement of the Three-Dimensional Flow Fields of a Gun-Type Gas Burner Using Triple Hot-Wire Probe", J. of the KSPSE, Vol. 10, No. 3, pp. 23-31.
  5. J. K. Kim, 2004, "Experimental Investigation on the Turbulence Augmentation of a Gun-Type Gas Burner by Slits and Swirl Vanes", KSME International Journal, Vol. 18, No. 10, pp. 1819-1828. https://doi.org/10.1007/BF02984330
  6. J. K. Kim, S. H. Oh and K. J. Jeong, 2006 "Measurement System Development for Three-Dimensional Flow Velocity Components Using Straight-Type Five-Hole Pressure Probe", J. of the KSPSE, Vol. 10, No. 4, pp. 56-64.
  7. J. K. Kim and S. H. Oh, 2014, "The Performance Assessment of a Straight-Type Five-Hole Pressure Probe Using a Zone Partition and Two-Dimensional Curve-Fitting Functions", J. of the KSPSE, Vol. 18, No. 1, pp. 22-31.
  8. J. K. Kim and S. H. Oh, 2014, "Evaluation of Turbulent Models on the Swirling Flow of a Gun-Type Gas Burner According to the Mesh Size", J. of the KSPSE, Vol. 18, No. 3, pp. 59-65.