DOI QR코드

DOI QR Code

Nonlinear flexural vibration of shear deformable functionally graded spherical shell panel

  • Kar, Vishesh R. (Department of Mechanical Engineering, National Institute of Technology) ;
  • Panda, Subrata K. (Department of Mechanical Engineering, National Institute of Technology)
  • 투고 : 2014.08.08
  • 발행 : 2015.03.25

초록

In this article, nonlinear free vibration behaviour of functionally graded spherical panel is analysed. A nonlinear mathematical model is developed based on higher order shear deformation theory for shallow shell by taking Green-Lagrange type of nonlinear kinematics. The material properties of functionally graded material are assumed to be varying continuously in transverse direction and evaluated using Voigt micromechanical model in conjunction with power-law distribution. The governing equation of the shell panel is obtained using Hamilton's principle and discretised with the help of nonlinear finite element method. The desired responses are evaluated through a direct iterative method. The present model has been validated by comparing the frequency ratio (nonlinear frequency to linear frequency) with those available published literatures. Finally, the effect of geometrical parameters (curvature ratio, thickness ratio, aspect ratio and support condition), power law indices and amplitude of vibration on the frequency ratios of spherical panel have been discussed through numerical experimentations.

키워드

참고문헌

  1. Alijani, F. and Amabili, M. (2014), "Non-linear vibrations of shells: A literature review from 2003 to 2013", Int. J. Nonlinear Mech., 58, 233-257. https://doi.org/10.1016/j.ijnonlinmec.2013.09.012
  2. Alijani, F., Amabili, M., Karagiozis, K. and Bakhtiari-Nejad, F. (2011a), "Nonlinear vibrations of functionally graded doubly curved shallow shells", J. Sound Vib., 330(7), 1432-1454. https://doi.org/10.1016/j.jsv.2010.10.003
  3. Alijani, F., Amabili, M., Karagiozis, K. and Bakhtiari-Nejad, F. (2011b), "Thermal effects on nonlinear vibrations of functionally graded doubly curved", Compos. Struct., 93(10), 2541-2553. https://doi.org/10.1016/j.compstruct.2011.04.016
  4. Bich, D.H. and Nguyen, N.X. (2012), "Nonlinear vibration of functionally graded circular cylindrical shells based on improved Donnell equations", J. Sound Vib., 331(25), 5488-5501. https://doi.org/10.1016/j.jsv.2012.07.024
  5. Birman, V. and Byrd, L.W. (2007), "Modeling and analysis of functionally graded materials and structures", Appl. Mech. Rev., 60(5), 195-216. https://doi.org/10.1115/1.2777164
  6. Chorfi, S.M. and Houmat, A. (2010), "Non-linear free vibration of a functionally graded doubly-curved shallow shell of elliptical plan-form", Compos. Struct., 92(10), 2573-2581. https://doi.org/10.1016/j.compstruct.2010.02.001
  7. Gibson, L.J., Ashby, M.F., Karam, G.N., Wegst, U. and Shercliff, H.R. (1995), "Mechanical properties of natural materials. II. Microstructures for mechanical efficiency", Proc. R. Soc. A, 450(1938), 141-162. https://doi.org/10.1098/rspa.1995.0076
  8. Haddadpour, H., Mahmoudkhani, S. and Navazi, H.M. (2007), "Free vibration analysis of functionally graded cylindrical shells including thermal effects", Thin-Wall. Struct., 45(6), 591-599. https://doi.org/10.1016/j.tws.2007.04.007
  9. Hosseini-Hashemi, Sh., Taher, H.R.D., Akhavan, H. and Omidi, M. (2010), "Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory", Appl. Math. Model., 34(5), 1276-1291. https://doi.org/10.1016/j.apm.2009.08.008
  10. Jha, D.K., Kant, T. and Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. https://doi.org/10.1016/j.compstruct.2012.09.001
  11. Liew, K.M., Zhao, X. and Ferreira, A.J.M. (2011), "A review of meshless methods for laminated and functionally graded plates and shells", Compos. Struct., 93(8), 2031-2041. https://doi.org/10.1016/j.compstruct.2011.02.018
  12. Malekzadeh, P. and Heydarpour, Y. (2012), "Free vibration analysis of rotating functionally graded cylindrical shells in thermal environment", Compos. Struct., 94(9), 2971-2981. https://doi.org/10.1016/j.compstruct.2012.04.011
  13. Matsunaga, H. (2008), "Free vibration and stability of functionally graded shallow shells according to a 2D higher-order deformation theory", Compos. Struct., 84(2),132-146. https://doi.org/10.1016/j.compstruct.2007.07.006
  14. Panda, S.K. and Singh, B.N. (2009), "Nonlinear free vibration of spherical shell panel using higher order shear deformation theory - A finite element approach", Int. J. Pres. Ves. Pip., 86(6), 373-383. https://doi.org/10.1016/j.ijpvp.2008.11.023
  15. Patel, B.P., Gupta, S.S., Loknath, M.S. and Kadu, C.P. (2005), "Free vibration analysis of functionally graded elliptical cylindrical shells using higher-order theory", Compos. Struct., 69(3), 259-270. https://doi.org/10.1016/j.compstruct.2004.07.002
  16. Pradyumna, S. and Bandyopadhyay, J.N. (2008), "Free vibration analysis of functionally graded curved panels using a higher-order finite element formulation", J. Sound Vib., 318(1-2), 176-192. https://doi.org/10.1016/j.jsv.2008.03.056
  17. Pradyumna, S., Nanda, N. and Bandyopadhyay, J.N. (2010), "Geometrically nonlinear transient analysis of functionally graded shell panels using a higher-order finite element formulation", J. Mech. Engg. Res., 2(2), 39-51.
  18. Rahimi, G.H., Ansari, R. and Hemmatnezhad, M. (2011), "Vibration of functionally graded cylindrical shells with ring support", Sci. Iran. Trans. B, 18(6), 1313-1320. https://doi.org/10.1016/j.scient.2011.11.026
  19. Reddy, J.N. (2003), Mechanics of Llaminated Composite: Plates and Shells-Theory and Analysis, (2nd Edition), CRC press, Boca Raton, FL, USA.
  20. Santos, H., Soares, C.M.M., Soares, C.A.M. and Reddy, J.N. (2009), "A semi-analytical finite element model for the analysis of cylindrical shells made of functionally graded materials", Compos. Struct., 91(4), 427-432. https://doi.org/10.1016/j.compstruct.2009.04.008
  21. Shen, H.S. (2009), Functionally Graded Material: Nonlinear Analysis of Plates & Shells, CRC press, Boca Raton, FL, USA.
  22. Shen, H.S. and Wang, H. (2014), "Nonlinear vibration of shear deformable FGM cylindrical panels resting on elastic foundations in thermal environments", Compos. Part B-Eng., 60, 167-177. https://doi.org/10.1016/j.compositesb.2013.12.051
  23. Sundararajan, N., Prakash, T. and Ganapathi, M. (2005), "Nonlinear free flexural vibrations of functionally graded rectangular and skew plates under thermal environments", Finite Elem. Anal. Des., 42(2), 152-168. https://doi.org/10.1016/j.finel.2005.06.001
  24. Talha, M. and Singh, B.N. (2011), "Large amplitude free flexural vibration analysis of shear deformable FGM plates using nonlinear finite element method", Finite Elem. Anal. Des., 47(4), 394-401. https://doi.org/10.1016/j.finel.2010.11.006
  25. Tornabene, F. and Viola, E. (2009), "Free vibration analysis of functionally graded panels and shells of revolution", Meccanica, 44(3), 255-281. https://doi.org/10.1007/s11012-008-9167-x
  26. Uymaz, B. and Aydogdu, M. (2007), "Three-dimensional vibration analysis of functionally graded plates under various boundary conditions:", J. Reinf. Plast. Comp., 26(18), 1847-1863. https://doi.org/10.1177/0731684407081351

피인용 문헌

  1. Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory vol.22, pp.4, 2016, https://doi.org/10.12989/was.2016.22.4.429
  2. On thermal stability of plates with functionally graded coefficient of thermal expansion vol.60, pp.2, 2016, https://doi.org/10.12989/sem.2016.60.2.313
  3. Free vibration analysis of a hard-coating cantilever cylindrical shell with elastic constraints vol.63, 2017, https://doi.org/10.1016/j.ast.2017.01.002
  4. An efficient and simple shear deformation theory for free vibration of functionally graded rectangular plates on Winkler-Pasternak elastic foundations vol.22, pp.3, 2016, https://doi.org/10.12989/was.2016.22.3.329
  5. A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates vol.22, pp.3, 2016, https://doi.org/10.12989/scs.2016.22.3.473
  6. A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates vol.184, 2018, https://doi.org/10.1016/j.compstruct.2017.10.047
  7. A simple hyperbolic shear deformation theory for vibration analysis of thick functionally graded rectangular plates resting on elastic foundations vol.11, pp.2, 2016, https://doi.org/10.12989/gae.2016.11.2.289
  8. Thermal post-buckling behavior of imperfect temperature-dependent sandwich FGM plates resting on Pasternak elastic foundation vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.091
  9. Free vibration analysis of composite cylindrical shells with non-uniform thickness walls vol.20, pp.5, 2016, https://doi.org/10.12989/scs.2016.20.5.1087
  10. Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept vol.20, pp.5, 2016, https://doi.org/10.12989/scs.2016.20.5.963
  11. Frequency analysis of nanoporous mass sensors based on a vibrating heterogeneous nanoplate and nonlocal strain gradient theory 2017, https://doi.org/10.1007/s00542-017-3531-5
  12. An efficient shear deformation theory for wave propagation of functionally graded material plates vol.57, pp.5, 2016, https://doi.org/10.12989/sem.2016.57.5.837
  13. Thermal stability of functionally graded sandwich plates using a simple shear deformation theory vol.58, pp.3, 2016, https://doi.org/10.12989/sem.2016.58.3.397
  14. Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory vol.18, pp.4, 2016, https://doi.org/10.12989/sss.2016.18.4.755
  15. Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory vol.57, pp.4, 2016, https://doi.org/10.12989/sem.2016.57.4.617
  16. A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.257
  17. Thermal stability analysis of solar functionally graded plates on elastic foundation using an efficient hyperbolic shear deformation theory vol.10, pp.3, 2016, https://doi.org/10.12989/gae.2016.10.3.357
  18. Buckling behaviours of functionally graded polymeric thin-walled hemispherical shells vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.849
  19. A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate vol.60, pp.4, 2016, https://doi.org/10.12989/sem.2016.60.4.547
  20. Buckling Analysis of Orthotropic Nanoscale Plates Resting on Elastic Foundations vol.55, pp.1661-9897, 2018, https://doi.org/10.4028/www.scientific.net/JNanoR.55.42
  21. Geometrically nonlinear analysis of elastoplastic behavior of functionally graded shells pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0633-3
  22. fiber by steam explosion pp.1544-046X, 2018, https://doi.org/10.1080/15440478.2018.1477085
  23. A new five unknown quasi-3D type HSDT for thermomechanical bending analysis of FGM sandwich plates vol.22, pp.5, 2015, https://doi.org/10.12989/scs.2016.22.5.975
  24. A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation vol.12, pp.1, 2015, https://doi.org/10.12989/gae.2017.12.1.009
  25. Free vibrations of precast modular steel-concrete composite railway track slabs vol.24, pp.1, 2015, https://doi.org/10.12989/scs.2017.24.1.113
  26. A new shear deformation plate theory with stretching effect for buckling analysis of functionally graded sandwich plates vol.24, pp.5, 2017, https://doi.org/10.12989/scs.2017.24.5.569
  27. An original single variable shear deformation theory for buckling analysis of thick isotropic plates vol.63, pp.4, 2017, https://doi.org/10.12989/sem.2017.63.4.439
  28. A simple analytical approach for thermal buckling of thick functionally graded sandwich plates vol.63, pp.5, 2015, https://doi.org/10.12989/sem.2017.63.5.585
  29. Vibration analysis of nonlocal advanced nanobeams in hygro-thermal environment using a new two-unknown trigonometric shear deformation beam theory vol.20, pp.3, 2015, https://doi.org/10.12989/sss.2017.20.3.369
  30. A new and simple HSDT for thermal stability analysis of FG sandwich plates vol.25, pp.2, 2015, https://doi.org/10.12989/scs.2017.25.2.157
  31. A novel simple two-unknown hyperbolic shear deformation theory for functionally graded beams vol.64, pp.2, 2015, https://doi.org/10.12989/sem.2017.64.2.145
  32. An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates vol.25, pp.3, 2015, https://doi.org/10.12989/scs.2017.25.3.257
  33. A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate vol.25, pp.4, 2017, https://doi.org/10.12989/scs.2017.25.4.389
  34. A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates vol.64, pp.4, 2015, https://doi.org/10.12989/sem.2017.64.4.391
  35. An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions vol.25, pp.6, 2015, https://doi.org/10.12989/scs.2017.25.6.693
  36. An original HSDT for free vibration analysis of functionally graded plates vol.25, pp.6, 2015, https://doi.org/10.12989/scs.2017.25.6.735
  37. Post-buckling analysis of shear-deformable composite beams using a novel simple two-unknown beam theory vol.65, pp.5, 2015, https://doi.org/10.12989/sem.2018.65.5.621
  38. Improved HSDT accounting for effect of thickness stretching in advanced composite plates vol.66, pp.1, 2015, https://doi.org/10.12989/sem.2018.66.1.061
  39. A novel shear deformation theory for buckling analysis of single layer graphene sheet based on nonlocal elasticity theory vol.21, pp.4, 2015, https://doi.org/10.12989/sss.2018.21.4.397
  40. Free vibration of FGM plates with porosity by a shear deformation theory with four variables vol.66, pp.3, 2015, https://doi.org/10.12989/sem.2018.66.3.353
  41. A novel four-unknown quasi-3D shear deformation theory for functionally graded plates vol.27, pp.5, 2015, https://doi.org/10.12989/scs.2018.27.5.599
  42. Thermal buckling of FGM beams having parabolic thickness variation and temperature dependent materials vol.27, pp.6, 2015, https://doi.org/10.12989/scs.2018.27.6.777
  43. Buckling analysis of new quasi-3D FG nanobeams based on nonlocal strain gradient elasticity theory and variable length scale parameter vol.28, pp.1, 2015, https://doi.org/10.12989/scs.2018.28.1.013
  44. Eigenfrequencies of advanced composite plates using an efficient hybrid quasi-3D shear deformation theory vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.121
  45. Eigenfrequencies of advanced composite plates using an efficient hybrid quasi-3D shear deformation theory vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.121
  46. A new plate model for vibration response of advanced composite plates in thermal environment vol.67, pp.4, 2015, https://doi.org/10.12989/sem.2018.67.4.369
  47. Effect of homogenization models on stress analysis of functionally graded plates vol.67, pp.5, 2018, https://doi.org/10.12989/sem.2018.67.5.527
  48. Nonlinear thermoelastic analysis of FGM thick plates vol.8, pp.5, 2015, https://doi.org/10.12989/csm.2019.8.5.439
  49. A novel hyperbolic shear deformation theory for the mechanical buckling analysis of advanced composite plates resting on elastic foundations vol.30, pp.1, 2015, https://doi.org/10.12989/scs.2019.30.1.013
  50. Buckling analysis of nanoplate-type temperature-dependent heterogeneous materials vol.7, pp.1, 2015, https://doi.org/10.12989/anr.2019.7.1.051
  51. Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory vol.28, pp.1, 2015, https://doi.org/10.12989/was.2019.28.1.019
  52. Dynamic and wave propagation investigation of FGM plates with porosities using a four variable plate theory vol.28, pp.1, 2015, https://doi.org/10.12989/was.2019.28.1.049
  53. Nonlocal strain gradient model for thermal stability of FG nanoplates integrated with piezoelectric layers vol.23, pp.3, 2015, https://doi.org/10.12989/sss.2019.23.3.215
  54. The effect of parameters of visco-Pasternak foundation on the bending and vibration properties of a thick FG plate vol.18, pp.2, 2015, https://doi.org/10.12989/gae.2019.18.2.161
  55. A simple quasi-3D HSDT for the dynamics analysis of FG thick plate on elastic foundation vol.31, pp.5, 2015, https://doi.org/10.12989/scs.2019.31.5.503
  56. Vibration analysis of nonlocal porous nanobeams made of functionally graded material vol.7, pp.5, 2019, https://doi.org/10.12989/anr.2019.7.5.351
  57. Galerkin’s approach for buckling analysis of functionally graded anisotropic nanoplates/different boundary conditions vol.35, pp.4, 2015, https://doi.org/10.1007/s00366-018-0664-9
  58. Free vibration analysis of uniform and stepped functionally graded circular cylindrical shells vol.33, pp.2, 2015, https://doi.org/10.12989/scs.2019.33.2.163
  59. Free vibration analysis of angle-ply laminated composite and soft core sandwich plates vol.33, pp.5, 2019, https://doi.org/10.12989/scs.2019.33.5.663
  60. A new higher-order shear and normal deformation theory for the buckling analysis of new type of FGM sandwich plates vol.72, pp.5, 2019, https://doi.org/10.12989/sem.2019.72.5.653
  61. Nonlinear Vibrations of Laminated Cross-Ply Composite Cantilever Plate in Subsonic Air Flow vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/4601672
  62. A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: Bending and free vibration analysis vol.25, pp.1, 2020, https://doi.org/10.12989/cac.2020.25.1.037
  63. An existence and uniqueness theorem for the dynamics of flexural shells vol.25, pp.2, 2020, https://doi.org/10.1177/1081286519876322
  64. Influence of boundary conditions on the bending and free vibration behavior of FGM sandwich plates using a four-unknown refined integral plate theory vol.25, pp.3, 2020, https://doi.org/10.12989/cac.2020.25.3.225
  65. Numerical simulations for the dynamics of flexural shells vol.25, pp.4, 2020, https://doi.org/10.1177/1081286519891230
  66. An inclined FGM beam under a moving mass considering Coriolis and centrifugal accelerations vol.35, pp.1, 2020, https://doi.org/10.12989/scs.2020.35.1.061
  67. Influence of material composition on buckling response of FG plates using a simple plate integral model vol.25, pp.4, 2015, https://doi.org/10.12989/sss.2020.25.4.447
  68. Bending behaviour of FGM plates via a simple quasi-3D and 2D shear deformation theories vol.9, pp.3, 2020, https://doi.org/10.12989/csm.2020.9.3.237
  69. A new innovative 3-unknowns HSDT for buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions vol.22, pp.2, 2015, https://doi.org/10.12989/gae.2020.22.2.119
  70. A novel hyperbolic plate theory including stretching effect for free vibration analysis of advanced composite plates in thermal environments vol.75, pp.2, 2020, https://doi.org/10.12989/sem.2020.75.2.193
  71. Free vibration of FG-GPLRC spherical shell on two parameter elastic foundation vol.36, pp.6, 2015, https://doi.org/10.12989/scs.2020.36.6.711
  72. Nonlinear Dynamic Behavior of Porous and Imperfect Bernoulli-Euler Functionally Graded Nanobeams Resting on Winkler Elastic Foundation vol.8, pp.4, 2020, https://doi.org/10.3390/technologies8040056
  73. Nonlinear buckling analysis of FGP shallow spherical shells under thermomechanical condition vol.40, pp.4, 2015, https://doi.org/10.12989/scs.2021.40.4.555
  74. Mechanical and thermal buckling analysis of laminated composite plates vol.40, pp.5, 2015, https://doi.org/10.12989/scs.2021.40.5.697