Steel and Composite Structures

  • 제18권3호
  • /
  • Pages.673-691
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic prediction fatigue life of composite wind turbine blade

  • Lecheb, Samir (Laboratory of Engines Dynamics and Vibroacoustics, University of Boumerdes) ;
  • Nour, Abdelkader (Laboratory of Engines Dynamics and Vibroacoustics, University of Boumerdes) ;
  • Chellil, Ahmed (Laboratory of Engines Dynamics and Vibroacoustics, University of Boumerdes) ;
  • Mechakra, Hamza (Laboratory of Engines Dynamics and Vibroacoustics, University of Boumerdes) ;
  • Ghanem, Hicham (Laboratory of Engines Dynamics and Vibroacoustics, University of Boumerdes) ;
  • Kebir, Hocine (Laboratory Roberval, University of Technology Compiegne, UTC)
  • 투고 : 2014.03.22
  • 심사 : 2014.11.02
  • 발행 : 2015.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper we are particularly focusing on the dynamic crack fatigue life of a 25 m length wind turbine blade. The blade consists of composite materiel (glass/epoxy). This work consisted initially to make a theoretical study, the turbine blade is modeled as a Timoshenko rotating beam and the analytical formulation is obtained. After applying boundary condition and loads, we have studied the stress, strain and displacement in order to determine the critical zone, also show the six first modes shapes to the wind turbine blade. Secondly was addressed to study the crack initiation in critical zone which based to finite element to give the results, then follow the evolution of the displacement, strain, stress and first six naturals frequencies a function as crack growth. In the experimental part the laminate plate specimen with two layers is tested under cyclic load in fully reversible tensile at ratio test (R = 0), the fast fracture occur phenomenon and the fatigue life are presented, the fatigue testing exerted in INSTRON 8801 machine. Finally which allows the knowledge their effect on the fatigue life, this residual change of dynamic behavior parameters can be used to predicted a crack size and diagnostic of blade.

키워드

참고문헌

  1. Baumgart, A. (2002), "A mathematical model for wind turbine blades", J. Sound Vib., 251(1), 1-12. https://doi.org/10.1006/jsvi.2001.3806
  2. Berthelot, J.M. (2006), Materiaux Composites. Comportement mecanique et Analyse des structures, (4th Ed.), Tech and Doc, France.
  3. Chellil, A., Nour, A., Lecheb, S., Kebir, H. and Chevalier, Y. (2013), "Impact of the fuselage damping characteristics and the blade rigidity on the stability of helicopter", J. Aerosp. Sci. Technol., 29(1), 235-252. https://doi.org/10.1016/j.ast.2013.03.007
  4. El Ghazly, N.M. (1993), "Static and dynamic analysis of wind turbine blades using the finite element method", Renew Energy, 36(16), 705-724.
  5. Ferreira, J.A.M., Costa, J.D.M. and Reis, P.N.B. (1999a), "Static and fatigue behavior of glass fiber reinforced polypropylene composites", Theor. Appl. Fract. Mech., 31(1), 67-74. https://doi.org/10.1016/S0167-8442(98)00068-8
  6. Ferreira, J.A.M., Costa, J.D.M., Reis, P.N.B. and Richardson, M.O.W. (1999b), "Analysis of fatigue and damage in glass-fibre-reinforced polypropylene composite materials", Compos. Sci. Technol., 59(10), 1461-1467. https://doi.org/10.1016/S0266-3538(98)00185-7
  7. Ferreira, J.M., Silva, H., Costa, J.D. and Richardson, M. (2005), "Stress analysis of lap joints involving natural fibre reinforced interface layers", Compos.: Part B, 36(1), 1-7.
  8. Isaac, D. and Ori, I. (1996), Engineering Mechanics of Composite Materials, (2nd Edition), Oxford University Press, New York, NY, USA.
  9. Kensche, C.W. (2006), "Fatigue of composites for wind turbines", Int. J. Fatigue, 28(10), 1363-1374. https://doi.org/10.1016/j.ijfatigue.2006.02.040
  10. Kong, C., Kim, T., Han, D. and Sugiyama, Y. (2006), "Investigation of fatigue life for a medium scale composite wind turbine blade", Int. J. Fatigue, 28(10), 1382-1388. https://doi.org/10.1016/j.ijfatigue.2006.02.034
  11. Lecheb, S., Nour, A., Chellil, A., Sam, S., Belmiloud, D. and Kebir, H. (2013), "Prediction life of horizontal rotors by natural frequency evolution", J. Des. Model. Mech. Syst., 105-110.
  12. Lecheb, S., Nour, A., Chellil, A., Mechakra, H., Amarache, A. and Kebir, H. (2014), "An advanced dynamic repair of edge crack aluminum plate with a composite patch", Mater. Sci. Forum, 794-796, 716-721. https://doi.org/10.4028/www.scientific.net/MSF.794-796.716
  13. Lee, S.Y. and Sheu, J. (2007), "Free vibration of an extensible rotating inclined Timoshenko beam", J. Sound Vib., 304(3-6), 606-624. https://doi.org/10.1016/j.jsv.2007.03.005
  14. Leissa, A. (1981), "Vibration aspects of rotating turbo machinery blades", ASME Appl. Mech. Rev., 34(5), 629-635.
  15. Liew, J.Y.R. and Uy, B. (2001), "Advanced analysis of composite frames", Prog Struct Eng Mater, 3(2), 159-169. https://doi.org/10.1002/pse.82
  16. Liew, K.M., Zhao, X. and Ferreira, A.J.M. (2011), "A review of meshless methods for laminated and functionally graded plates and shells", Compos. Struct., 93(8), 2031-2041. https://doi.org/10.1016/j.compstruct.2011.02.018
  17. Lin, S.C. and Hsiao, K.M. (2001), "Vibration analysis of a rotating Timoshenko beam", J. Sound Vib., 240(2), 303-322. https://doi.org/10.1006/jsvi.2000.3234
  18. Maalawi, K.Y. and Negm, H.M. (2002), "Optimal frequency design of wind turbine blades", J. Wind Eng. Ind. Aerodyn., 90(8), 961-986. https://doi.org/10.1016/S0167-6105(02)00214-3
  19. Manwell, J.F. (2009), Wind Energy Explained: Theory, Design and Application, (2nd Ed.), John Wiley & Sons, West Sussex, UK.
  20. Mishnaevsky, J.R. (2012), "Composite materials for wind energy application", Comput. Mech., 50(2), 195-207. https://doi.org/10.1007/s00466-012-0727-5
  21. Murtagh, P.J., Basu, B. and Broderick, B.M. (2005), "Along wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loading", Eng. Struct., 27(8), 1209-1219. https://doi.org/10.1016/j.engstruct.2005.03.004
  22. Rao, S.S. and Gupta, R.S. (2001), "Finite element vibration analysis of rotating Timoshenko beams", J. Sound Vib., 242(1), 103-124. https://doi.org/10.1006/jsvi.2000.3362
  23. Reis, P.N.B., Ferreira, J.A.M., Antunes, F.V. and Costa, J.D.M. (2007), "Flexural behavior of hybrid laminated composites", Compos.: Part A, 38(6), 1612-1620. https://doi.org/10.1016/j.compositesa.2006.11.010
  24. Schubel, J.P and Crossley, R.J. (2012), "Wind turbine blade design", MDPI Energ. J., 5(9), 3425-3449.
  25. Shokrieh, M.M. and Rafiee, R. (2006), "Simulation of fatigue failure in a full composite wind turbine blade", Compos. Struct., 74(3), 332-342. https://doi.org/10.1016/j.compstruct.2005.04.027
  26. Thwe, M.M. and Liao, K. (2003), "Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites", Compos. Sci. Technol., 63(3-4), 375-387. https://doi.org/10.1016/S0266-3538(02)00225-7
  27. Younsi, R., El-Batanony, I., Tritsch, J., Naji, H. and Landjerit, B. (2001), "Dynamic study of wind turbine blade with horizontal axis", Eur. J. Mech. - A/Solids, 20(2), 241-252. https://doi.org/10.1016/S0997-7538(00)01127-X

피인용 문헌

  1. Fatigue life prediction of wind turbine rotor blade composites considering the combined effects of stress amplitude and mean stress 2018, https://doi.org/10.1177/1748006X17751495
  2. Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads vol.9, pp.9, 2017, https://doi.org/10.1177/1687814017724088
  3. Deep neural network-based wind speed forecasting and fatigue analysis of a large composite wind turbine blade pp.2041-2983, 2018, https://doi.org/10.1177/0954406218797972
  4. Localisation of embedded water drop in glass composite using THz spectroscopy vol.21, pp.6, 2018, https://doi.org/10.12989/sss.2018.21.6.751
  5. Effect of Welding Residual Stress on Along-Wind Fatigue Life of Welded Joints in Guyed Mast vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/6467354