Steel and Composite Structures

  • 제18권3호
  • /
  • Pages.565-582
  • /
  • 2015
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic analysis and model test on steel-concrete composite beams under moving loads

  • Hou, Zhongming (School of Civil Engineering, Beijing Jiaotong University) ;
  • Xia, He (School of Civil Engineering, Beijing Jiaotong University) ;
  • Wang, Yuanqing (Department of Civil Engineering, Tsinghua University) ;
  • Zhang, Yanling (School of Civil Engineering, Shijiazhuang Tiedao University) ;
  • Zhang, Tianshen (Department of Civil Engineering, Tsinghua University)
  • 투고 : 2014.01.27
  • 심사 : 2014.08.21
  • 발행 : 2015.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper is concerned with the dynamic analysis of simply-supported steel-concrete composite beams under moving loads. Considering the interface slip between steel girder and concrete slab, the governing motion equations are derived from the direct balanced method. By variable separation approach, the analytical solution of natural frequencies and mode shapes are obtained, as well as the orthogonal conditions. Then the dynamic responses of the composite beam under moving loads are analyzed, and compared with the experimental results. The analysis results show that the governing motion equations become more complicated when interface slip is taken into account, and the dynamic behaviors are significantly influenced by the shear connection stiffness. In the dynamic calculation of composite beams, the global stiffness should not be reduced as the same factor to all orders, but as different ones according to the dynamic stiffness reduction factor (DSRF), to which should be paid more attention in calculation, design and experiment, or else great deviation is inevitable.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation

참고문헌

  1. Andrews, E.S. (1912), Elementary Principles of Reinforced Concrete Construction, Scott, Greenwood and Son, London, UK.
  2. Banerjee, J.R. (2001), "Frequency equation and mode shape formulae for composite Timoshenko beams", Compos. Struct., 51(4), 381-388. https://doi.org/10.1016/S0263-8223(00)00153-7
  3. Biscontin, G., Morassi, A. and Wendel, P. (2000), "Vibrations of steel-concrete composite beams", J. Vib. Control, 6(5), 691-714. https://doi.org/10.1177/107754630000600503
  4. Dilena, M. and Morassi, A. (2003), "A damage analysis of steel-concrete composite beams via dynamic methods: Part II. Analytical models and damage detection", J. Vib. Control, 9(5), 529-565. https://doi.org/10.1177/1077546303009005003
  5. Esmailzadeh, E. and Jalili, N. (2003), "Vehicle-passenger-structure interaction of uniform bridges traversed by moving vehicles". J. Sound Vib., 260(4), 611-635. https://doi.org/10.1016/S0022-460X(02)00960-4
  6. European Standard (2007), Design of composite steel and concrete structures, Part 1.1: General rules and rules for buildings-General rules, EN 1994-1-1, Eurocode 4.
  7. Galambos, T.V. (2000), "Recent research and design developments in steel and composite steel-concrete structures in USA", J. Constr. Steel. Res., 55(1/3), 289-303. https://doi.org/10.1016/S0143-974X(99)00090-5
  8. Gattesco, N. (1999), "Analytical modeling of nonlinear behavior of composite beams with deformable connection", J. Constr. Steel. Res., 52(2), 195-218. https://doi.org/10.1016/S0143-974X(99)00026-7
  9. Girhammar, U.A., Pan, D.H. and Gustafsson, A. (2009). "Exact dynamic analysis of composite beams with partial interaction", Int. J. Mech. Sci., 51(8), 565-582. https://doi.org/10.1016/j.ijmecsci.2009.06.004
  10. Hou, Z.M., Xia, H., Li, Y.S. and Dai, Y.L. (2011), "Dynamic response analysis and shear stud damage identification of steel-concrete composite beams", Proceedings of the 14th Asia Pacific Vibration Conference, Hong Kong, December, pp. 1711-1720.
  11. Hou, Z.M., Xia, H. and Zhang, Y.L. (2012), "Dynamic analysis and shear connector damage identification of steel-concrete composite beams", Steel Compos. Struct., Int. J., 13(4), 327-341. https://doi.org/10.12989/scs.2012.13.4.327
  12. Huang, C.W. and Su, Y.H. (2008), "Dynamic characteristics of partial composite beams", Int. J. Struct. Stab. Dy., 8(4), 665-685. https://doi.org/10.1142/S0219455408002946
  13. Jiang, L.Z., Ding, F.X. and Yu, Z.W. (2006), "Experimental study on the integrated dynamic behavior of continuous steel-concrete composite girders of railway bridges", Chinese Railway. Sci., 27(5), 60-65. [In Chinese)
  14. Kim, N. (2009), "Dynamic stiffness matrix of composite box beams", Steel Compos. Struct., Int. J., 9(5), 473-497. https://doi.org/10.12989/scs.2009.9.5.473
  15. Kroflic, A., Planinc, I., Saje, M. and Cas, B. (2010), "Analytical solution of two-layer beam including interlayer slip and uplift", Struct. Eng. Mech., Int. J., 34(6), 667-683. https://doi.org/10.12989/sem.2010.34.6.667
  16. Nie, J.G. and Cai, C.S. (2003), "Steel-concrete composite beams considering shear slip effects", J. Stru. Eng., ASCE, 129(4), 495-506. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(495)
  17. Nie, J.G., Shen, J.M. and Yuan, Y.S. (1994), "A general formula for predicting the deflection of simply supported composite steel concrete beams with the consideration of slip effect", Eng. Mech., 11(1), 21-27.
  18. Nie, J.G., Li, Y., Yu, Z.W. and Chen, Y.Y. (1998), "Study on short and long-term rigidity of composite steel-concrete beams", J. Tsinghua Univ. (Sci & Tech), 38(10), 38-41.
  19. Ranzi, G. and Zonab, A. (2007), "A steel-concrete composite beam model with partial interaction including the shear deformability of the steel component", Eng. Struct., 29(11), 3026-3041. https://doi.org/10.1016/j.engstruct.2007.02.007
  20. Taly, N. (1998), Design of Modern Highway Bridges, McGraw-Hill Companies Inc., New York, NY, USA.
  21. Wang, Y.C. (1998), "Deflection of steel-concrete composite beams with partial shear interaction", J. Struct. Eng., 124(10), 1159-1265. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1159)
  22. Wang, J.Q., Lu, Z.T. and Liu, Z. (2005), "Consistency factor method for calculating deformation of composite steel-concrete girders with partial shear connection", J. Southeast Univ., 35(Sup (I)), 5-10.
  23. Won, S.G., Bae, S.H., Jeong, W.B., Cho, J.R. and Bae, S.R. (2012), "Forced vibration analysis of damped beam structures with composite cross-section using Timoshenko beam element", Struct. Eng. Mech., Int. J., 43(1), 15-30. https://doi.org/10.12989/sem.2012.43.1.015
  24. Xia, H., Zhang, N. and De Roeck, G. (2003), "Dynamic analysis of high speed railway bridge under articulated trains", Comput. Struct., 81(26-27), 2467-2478. https://doi.org/10.1016/S0045-7949(03)00309-2
  25. Xia, H., Xu, Y.L., Chan, T.H.T. and Zakeri, J.A. (2007), "Dynamic responses of railway suspension bridges under moving train", Sci. Iran., 14(5), 385-394.
  26. Xu, R.Q. and Wu, Y.F. (2007), "Static, dynamic, and buckling analysis of partial interaction composite members using Timoshenko's beam theory". Int. J. Mech. Sci., 49(10), 1139-1155. https://doi.org/10.1016/j.ijmecsci.2007.02.006
  27. Zhang, Y.Z. (2002), "Analysis on responses of continuous composite beams in high-speed railways". J. Chin. Railway. Soc., 24(6), 84-88.
  28. Zhang, Y.L. (2009), "Theoretical analysis and experimental research on behavior and crack control of negative moment zone in steel-concrete composite beams", Doctoral Dissertation, Beijing Jiaotong University, China, 20-32. [In Chinese]

피인용 문헌

  1. Flexural stiffness of steel-concrete composite beam under positive moment vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1369
  2. Dynamic response and analysis of cracked beam subjected to transit mass 2017, https://doi.org/10.1007/s40435-017-0361-3
  3. Finite Element Method of Composite Steel-Concrete Beams Considering Interface Slip and Uplift vol.11, pp.None, 2015, https://doi.org/10.2174/1874149501711010531
  4. Free vibrations of precast modular steel-concrete composite railway track slabs vol.24, pp.1, 2015, https://doi.org/10.12989/scs.2017.24.1.113
  5. Vibration characteristic analysis of high-speed railway simply supported beam bridge-track structure system vol.31, pp.6, 2015, https://doi.org/10.12989/scs.2019.31.6.591
  6. Effect of residual stress and geometric imperfection on the strength of steel box girders vol.34, pp.3, 2015, https://doi.org/10.12989/scs.2020.34.3.423
  7. An inclined FGM beam under a moving mass considering Coriolis and centrifugal accelerations vol.35, pp.1, 2020, https://doi.org/10.12989/scs.2020.35.1.061
  8. Numerical investigation of the dynamic responses of steel-concrete girder bridges subjected to moving vehicular loads vol.54, pp.3, 2015, https://doi.org/10.1177/0020294020981406
  9. Numerical Investigation on the Dynamic Performance of Steel-Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles vol.13, pp.24, 2015, https://doi.org/10.3390/su132413666