Journal of Biosystems Engineering

  • 제40권1호
  • /
  • Pages.35-46
  • /
  • 2015
  • /
  • 1738-1266(pISSN)
  • /
  • 2234-1862(eISSN)
한국농업기계학회 (Korean Society for Agricultural Machinery)
권호 표지
DOI QR코드

DOI QR Code

Virtual Prototyping of Automated System for Adjustable Row Spacing of Hydroponic Gullies in Multilayer Plant Factory

  • Ashtiani-Araghi, Alireza (Department of Biosystems Engineering, Seoul National University) ;
  • Lee, Chungu (Department of Biosystems Engineering, Seoul National University) ;
  • Cho, Seong-In (Department of Biosystems Engineering, Seoul National University) ;
  • Rhee, Joong-Yong (Department of Biosystems Engineering, Seoul National University)
  • 투고 : 2014.10.15
  • 심사 : 2014.12.23
  • 발행 : 2015.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: To present a flexible and accurate autonomous solution for creating any desired row spacing value between the hydroponic gullies in multilayer growing units, and evaluate the capabilities and performance of the relevant automated system through the use of virtual prototyping technique. Methods: To build the virtual prototype of the system, CAD models of its different parts, including an autonomous vehicle and the mechanical mechanisms embedded in the multilayer growing unit, were developed and imported into the RecurDyn simulation software. In order to implement the automated row spacing operation, three spacing modes with different loading cycles and working steps were defined, and the operation of the system was simulated to obtain the target row spacing values specified for each of these modes. Results: Motion profiles related to the horizontal displacement of: 1) the lower and upper sliding bars installed in the cultivation layers, and 2) the hydroponic gullies, during the simulation of the system operation, were generated and analyzed. No deviation from the specified target spacing values was observed at the end of simulations for all spacing modes. Conclusions: The results of the motion analysis obtained by simulating the system operation confirm the effectiveness of the control scheme proposed for automated row spacing of gullies. It was also found that proper sequencing of the loading cycles and the precision of the working strokes of the upper bars are the critical factors for establishing a certain row spacing value. Based on the simulation results, precise control of the back and forth motions of the upper bars is highly necessary for sound operation of the real system.

키워드

참고문헌

  1. Chang, Y. S., H. G. Song and D. E. Kim. 2005. Development of a chain conveyor type row spacing system for plant factory. Journal of Bio-environment Control 14(1): 7-14 (In Korean, with English abstract).
  2. Chang, Y. S., D. E. Kim, H. H. Kim, J. G. Kim and I. H. Yu. 2006. Utilization effect of sliding type crop row spacing system. Journal of Bio-environment Control 15(1): 63-69 (In Korean, with English abstract).
  3. Drury, G. 1984. Apparatus and method for transporting growing plants. U.S. Patent No. 4476651 A.
  4. Edan, Y., S. Han and N. Kondo. 2009. Automation in agriculture. In: Springer handbook of automation, ed. S. Y. Nof, pp. 1095-1128. Berlin, Heidelberg, Germany.
  5. Haub, J. T., J. G. Krassas, S. C. Rustad and N. Davis. 1982. Method and apparatus for increasing the spacing between plants in accordance with their growth rate. U.S. Patent No. 4216618 A.
  6. Horibe, K., K. Mori, K. Matsuo, K. Kondoh and T. Kameoka. 1993. Studies on the development of plant transfer equipment (part 2). Journal of Japanese Society of Agricultural Machinery 55(1):49-57 (In Japanese, with English abstract).
  7. Hydroponic production lines. Available at: http://www.greenautomation.fi/content/en/11501/857/857.html (23 December 2014).
  8. Ikeda, A. K., S. Nakayama, T. Ishii and I. Itakura. 1986. Apparatus for plant cultivation. U.S. Patent No. 4617755 A.
  9. Jansen, W. H. A. 2004. System with plant carriers that can be moved over rails. European Patent (EP) No. 1374666 A1.
  10. Kim, D. O., J. O. Ho, J. B. Yoon and K. L. Choi. 2013a. Automation in the plant factories with natural lighting. In: The plant factory, pp. 173-189. Rural Development Administration (RDA), Republic of Korea (In Korean).
  11. Kim, D. O., J. O. Ho, J. B. Yoon and K. L. Choi. 2013b. Automation in the plant factories with artificial lighting. In: The plant factory, pp. 79-95. Rural Development Administration (RDA), Republic of Korea (In Korean).
  12. Kim, Y. H. 2011. Studies on the automatic system for plant factory. In: Proceedings of 4th Urban-Type Plant Factory Symposium, pp. 125-140, Seoul, Republic of Korea.
  13. Korea Rural Development Administration (RDA). 2005. Development of plant production factory system for fresh leaf vegetables production all the year round. Technical report (In Korean).
  14. McHugh, R and H. H. Zhang. 2011. Virtual prototyping and Mechatronics for 21st century engineering. International Journal of Engineering Research and Innovation 3(2): 69-75.
  15. Mobile gully system (MGS). Available at: http://www.hortiplan.com/site/index.php?menu=3 (23 December 2014).
  16. Mori, K., K. Horibe, Y. Horino, A. Isomura, Y. Yonekawa, Y. Andoh, K. Matsuo and K. Kondoh. 1991. Studies on the development of plant transfer equipment (part 1). Journal of Japanese Society of Agricultural Machinery 55(1):49-57 (In Japanese, with English abstract).
  17. Rasin, B. 1998. Device for moving of growing troughs in a growing plant. European Patent (EP) No. 0663791 B1.
  18. Roberts, D. S. 1990. Method and apparatus for hydroponic gardening. U.S. Patent No. 4932158 A.
  19. Roodbergen, K. J and I. F. A. Vis. 2009. A survey of literature on automated storage and retrieval systems. European Journal of Operational Research 194(2): 343-362. https://doi.org/10.1016/j.ejor.2008.01.038
  20. Space-O-Mat System. Available at: http://www.visser.eu/products/all-products/Space-O-Mat%20System/(23 December 2014).