Acknowledgement
Supported by : National Natural Science Foundation of China
References
- Bonavetti, V., Donza, H., Menendez, G., Cabrera, O., & Irassar, E. F. (2003). Limestone filler cement in low w/c concrete: A rational use of energy. Cement and Concrete Research, 33(6), 865-871. https://doi.org/10.1016/S0008-8846(02)01087-6
- Bonavetti, V. L., & Irassar, E. F. (1994). The effect of stone dust content in sand. Cement and Concrete Research, 24(3), 580-590. https://doi.org/10.1016/0008-8846(94)90147-3
- Bonavetti, V. L., Rahhal, V. F., & Irassar, E. F. (2001). Studies on the carboaluminate formation in limestone filler-blended cements. Cement and Concrete Research, 31, 853-859. https://doi.org/10.1016/S0008-8846(01)00491-4
- Gutteridge, W. A., & Dalziel, J. A. (1990). Filler cement: The effect of the secondary component on the hydration of Portland cement: Part I. A fine non-hydraulic filler. Cement and Concrete Research, 20(5), 778-782. https://doi.org/10.1016/0008-8846(90)90011-L
-
Kakali, G., Tsivilis, S., Aggeli, E., & Bati, M. (2000). Hydration products of
$C_3A$ ,$C_3S$ and portland cement in the presence of$CaCO_3$ . Cement and Concrete Research, 30, 1073-1077. https://doi.org/10.1016/S0008-8846(00)00292-1 - Kumar, A., Oey, T., Kim, S., Thomas, D., Badran, S., Li, J., et al. (2013a). Simple methods to estimate the influence of limestone fillers on reaction and property evolution in cementitious materials. Cement & Concrete Composites, 42, 20-29. https://doi.org/10.1016/j.cemconcomp.2013.05.002
- Kumar, A., Oey, T., Falla, G. P., Henkensiefken, R., Neithalath, N., & Sant, G. (2013b). A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials. Construction and Building Materials, 43, 428-435. https://doi.org/10.1016/j.conbuildmat.2013.02.032
- Li, B. X., Zhou, M.-K., Tian, J.-P., & Hu, X.-M. (2006). Effect of stone dust and fly ash on properties of C60 high performance concrete containing manufactured sand. Journal of Building Materials, 9(4), 381-387 (in Chinese).
- Oey, T., Kumar, A., Bullard, J. W., & Neithalath, N. (2013). The filler effect: The influence of filler content and surface area on cementitious reaction rates. Journal of the American Ceramic Society, 96(6), 1987-1990.
- Poppe, A.-M., & Schutter, G. D. (2005). Cement hydration in the presence of high filler contents. Cement and Concrete Research, 35(12), 2290-2299. https://doi.org/10.1016/j.cemconres.2005.03.008
- Runzhang, Y. (1996). Bonding materials science (in China). Wuhan, China: Wuhan University of Technology Press.
- Soroka, I., & Stern, N. (1976). Calcareous fillers and the compressive strength of portland cement. Cement and Concrete Research, 6(3), 367-376. https://doi.org/10.1016/0008-8846(76)90099-5
- Zhou, M., Peng, S., Xu, J., & Zhu, C. (1996). Effect of stone powder on stone chippings concrete. Journal of Wuhan University of Technology (Materials Sciences Edition), 11(4), 29-34 (in Chinese).
Cited by
- Fresh and hardened properties of green binder concrete containing marble powder and brick powder vol.20, pp.1, 2015, https://doi.org/10.1080/19648189.2016.1246692
- Comparison of Effects of Sodium Bicarbonate and Sodium Carbonate on the Hydration and Properties of Portland Cement Paste vol.12, pp.7, 2015, https://doi.org/10.3390/ma12071033
- Role of recycling fine materials as filler for improving performance of concrete - a review vol.17, pp.2, 2015, https://doi.org/10.1080/14488353.2019.1626692
- Effect of Magnesium Carbonate on Hydration and Hardened Properties of Portland Cement Paste vol.24, pp.12, 2020, https://doi.org/10.1007/s12205-020-2292-3
- Effect of Li2CO3 on the properties of Portland cement paste vol.54, pp.1, 2015, https://doi.org/10.1617/s11527-020-01609-2