Acknowledgement
Supported by : National Research Foundation of Korea
References
-
H. Graber, G. Hofmann, R. Berndt, Correlations of burnup with the
$^{134}/Cs^{137}Cs$ and$^{154}/Eu^{137}Cs$ concentration ratios for irradiated LWR fuel (IAEA-SM-260/84), in: Nuclear Safeguards Technology 1982, Vol. I, IAEA, Vienna, 1983, pp. 443-454. - M.P. Gualandi, P. Peroni, Determination of burnup and plutonium content in irradiated fuels by gammaspectrometry measurements of radioactive fission products (IAEA-SM-201/3), in: Safeguarding Nuclear Materials, Vol. II, IAEA, Vienna, 1976, pp. 613-624.
- W. Smulek, R.K. Al-Dabbagh, K. Goroncek, M. Borkowski, Use of zirconium and ruthenium isotope correlations in the analysis of spent nuclear fuels, J. Radioanal. Nucl. Chem. 121 (1988) 385-393. https://doi.org/10.1007/BF02041425
- L. Koch, A. Cricchio, F. Gerin, Improved post-irradiation analysis for burn (IAEA-SM-149/2), in: Analytical Methods in the Nuclear Fuel Cycle, IAEA, Vienna, 1972, pp. 523-536.
- J. Krtil, F. Sus, V. Bulovic, E. Klosova, J. Rocek, Z. Maksimovic, The use of the isotope correlation for the determination of the components of irradiated fuel; II. Correlations of the radioactive fission products, Radiochem. Radioanal. Lett. 50 (1981) 79-87.
-
W. Smulek, J. Kritil, F. Sus, V. Bulovic, E. Klosova, Correlation between the ratio of
$^{154}Eu^{155}/Eu$ radioactivity and burn-up in fuel samples from the Czechoslovak nuclear power station A1, Radiochem. Radioanal. Lett. 50 (1982) 299-305. - J. Krtil, F. Sus, V. Bulovic, E. Klosova, V. Kuvik, Z. Maksimovic, The use of isotope correlation for the determination of the components of irradiated fuel; I. Heavy-atom isotope correlation for a natural uranium nuclear fuel, Radiochem, Radioanal. Lett. 49 (1981) 49-58.
- C. Foggi, F. Frenquellucci, G. Perdisa, Isotope correlations based on fission-product nuclides in LWR irradiated fuels. A theoretical evaluation (IAEA-SM-201/44), in: Safeguarding Nuclear Materials, Vol. II, IAEA, Vienna, 1976, pp. 425-438.
- C. Foggi, W.I. Zijp, Data treatment for the isotopic correlation technique (IAEA-SM-201/39), in: Safeguarding Nuclear Materials, Vol. II, IAEA, Vienna, 1976, pp. 405-424.
- A. Hermann, H.C. Mehner, Investigation into the possibilities of determining the uranium and plutoniumcontent of VVER-type fuel for safeguards in connection with isotope correlation techniques (IAEA-SM-231/20), in: Nuclear Safeguards Technology 1978, Vol. II, IAEA, Vienna, 1979, pp. 733-745.
- P.D. Regge, R. Boden, Precise isotopic correlations in plutonium recycling of light-water reactor fuel (IAEA-SM-231/25), in: Nuclear Safeguard Technology 1978, Vol. II, IAEA, Vienna, 1979, pp. 747-766.
- J. Krtil, F. Sus, V. Bulovic, E. Klosova, Z. Maksimovic, Correlation of the uranium and plutonium isotope compositions with burn-up for natural uranium fuel, Radiochem. Radioanal. Lett. 36 (1978) 369-374.
- D.E. Christensen, R.A. Schneider, Summary of experience with heavy-element isotopic correlation (IAEA-SM-201/10), in: Safeguarding Nuclear Materials, Vol. II, IAEA, Vienna, 1976, pp. 377-393.
- J.S. Kim, Y.S. Jeon, S.D. Park, B.C. Song, S.H. Han, J.G. Kim, Dissolution and burnup determination of irradiated U-Zr alloy nuclear fuel by chemical methods, Nucl. Eng. Technol. 38 (2006) 301-310.
- J.S. Kim, Analysis of the irradiated nuclear fuel using the heavy atom and neodymium isotope correlations with burnup, Nucl. Eng. Technol. 29 (1997) 327-335.
- J.S. Kim, S.H. Han, M.Y. Suh, K.S. Joe, T.Y. Eom, Burnup measurement of irradiated uranium dioxide fuel by chemical methods, Nucl. Eng. Technol. 21 (1989) 277-286.
- J.S. Kim, Y.S. Jeon, S.D. Park, S.H. Han, J.G. Kim, Burnup determination of high burnup and dry processed fuels based on isotope dilution mass spectrometric measurements, J. Nucl. Sci. Technol. 44 (2007) 1015-1023.
- ASTM, Standard test method for atom percent fission in uranium and plutonium fuel (neodymium-148 method), in: Annual Book of ASTM Standards 12.02, E321-96 (reapproved 2012), ASTM International, West Conshohocken, PA, USA, 2012.
- L. Koch, Post-irradiation isotopic analysis of reactor fuels (IAEA STI/PUB/337), in: Analytical Chemistry of Nuclear Fuels, IAEA, Vienna, 1972, pp. 111-118.
- ASTM, Standard test method for atom percent fission in uranium and plutonium fuel (mass spectrometric method), in: Annual Book of ASTM Standards 12.02, E244-80 (reapproved 1995), West Conshohocken, PA, 1996.
- J.E. Rein, C.F. Metz, Advantages and limitations of mass spectrometry for the measurement of the isotopic distributions of uranium and plutonium and application to nuclear fuel burnup (IAEA STI/PUB/337), in: Analytical Chemistry of Nuclear Fuels, IAEA, Vienna, 1978, pp. 135-142.
- J.E. Rein, Status of burnup measurement methodology (IAEA-SM-149/40), in: Analytical Methods in the Nuclear Fuel Cycle, IAEA, Vienna, 1972, pp. 449-472.
- J. Krtil, F. Sus, A. Hermann, Comparison of the burnup values for a VVER fuel by radiometric and mass spectrometric methods, Radiochem. Radioanal. Lett. 48 (1981) 209-219.
-
P. De Regge, R. Boden, Determination of neodymium isotopes as burnup indicator of highly irradiated
$(U,Pu)O_2$ LMFBR fuel, J. Radioanal. Chem. 35 (1977) 173-184. https://doi.org/10.1007/BF02518224 - T.R. England, B.F. Rider, ENDF-349 Evaluation and Compilation of Fission Product Yields 1993 (LA-UR-94-3106), Los Alamos National Laboratory, Los Alamos, NM, 1994.
-
W.J. Maeck, W.A. Emel, L.L. Dickerson, J.E. Delmore, J.H. Keller, F.A. Duce, R.L. Tromp, Discrepancies and Comments Regarding
$^{235}U$ and$^{239}PU$ Thermal Fission Yields and the Use of$^{148}Nd$ as a Burnup Monitor, Idaho Chemical Programs Report ICP-1092, Idaho National Engineering Laboratory, Idaho Falls, ID, 1976. - J.S. Kim, Y.S. Jeon, Y.S. Park, Y.J. Park, K. Song, Simultaneous determination of caesium, neodymium, uranium and plutonium isotopes in pressurized water reactor spent nuclear fuels by isotope dilution mass spectrometry, Asian J. Chem. 25 (2013) 7031-7033.
-
V.D. Heck, H. Borner, J.A. Pinston, R. Roussille, Neutron capture cross section of
$^{147}Nd$ , Atomkernenergie 24 (1974) 141.
Cited by
- Sensitivity and Uncertainty Analysis of Plutonium and Cesium Isotopes in Modeling of BR3 Reactor Spent Fuel vol.197, pp.1, 2015, https://doi.org/10.13182/nt16-88
- Precise U and Pu Isotope Ratio Measurements in Nuclear Samples by Hyphenating Capillary Electrophoresis and MC-ICPMS vol.90, pp.14, 2015, https://doi.org/10.1021/acs.analchem.8b01884
- A novel approach to determine the local burnup in irradiated fuels using Atom Probe Tomography (APT) vol.528, pp.None, 2015, https://doi.org/10.1016/j.jnucmat.2019.151853
- Neutronics analysis for MSR cell with different fuel salt channel geometries vol.32, pp.1, 2021, https://doi.org/10.1007/s41365-020-00844-0
- Simultaneous Isotopic Analysis of U, Pu, and Am in Spent Nuclear Fuel by Resonance Ionization Mass Spectrometry vol.93, pp.27, 2015, https://doi.org/10.1021/acs.analchem.1c01360
- Separation of Light Rare-Earth Elements Using Gas-Pressurized Extraction Chromatography vol.12, pp.4, 2015, https://doi.org/10.5478/msl.2021.12.4.186