References
- N. Cho, "Development Status of Direct Injection Gasoline Engines," Auto Journal, KSAE, Vol.25, No.6, pp.7-12, 2003.
- Y. Kim, S. Jun, Y. Kim, S. Rew, D. Lee, K. Choi and S. Park, "Study of PN Reduction to Comply with EURO IV Particle Emission Legislation for 1.6L Gasoline Direct Injection Vehicle," KSAE Annual Conference Proceedings, pp.440-446, 2011.
- C. Bae and Y. Jung, "Fuel Economy Improvement of Automotive Engines," Auto Journal, KSAE, Vol.34, No.1, pp.39-46, 2012.
- C. Arcoumanis, Z. Hu, C. Vafidis and J. Whitelaw, "Tumbling Motion: A Mechanism for Turbulence Enhancement in Spark-ignition Engines," SAE 900060, 1990.
- O. Hadded, H. Newber and R. Wurms, "Influence of Swirl and Tumble on Economy and Emissions of Multi Valve SI Engines," SAE 920516, 1992.
- A. ElsaBer, W. Samenfink, M. Hallmann and S. Wittig, "Mixing Phenomena of Fuel Spray in Intake Manifolds," Proceedings of ICLASS-94, pp.758-765, 1994.
- F.-Q. Zhao, M.-C. Lai and D. L. Harrington, "The Spray Characteristics of Automotive Port Fuel Injection - A Critical Review, SAE 950506, 1995.
- S. Lee, J. Chung, Y. Park, C. Yu and W. Kim, "Characteristics of the In-cylinder Flow and Fuel Behavior with Respect to Engine Temperature Condition in the MPI Dual Injection Engine," Transactions of KSAE, Vol.22, No.3, pp.210-219, 2014. https://doi.org/10.7467/KSAE.2014.22.3.210
- V. Yakhot, S. Tangam, T. B. Gatski, S. A. Orzag and C. G. Speziale, "Development of Turbulence Models for Shear Flows by a Double Expansion Technique," Physics of Fluids, Vol.4, Issue 7, pp.1510-1520, 1992. https://doi.org/10.1063/1.858424
- R. I. Issa, "Solution of the Implicitly Discrestised Fluid Flow Equations by Operator-Splitting," Journal of Computational Physics, Vol.62, Issue 1, pp.40-65, 1985. https://doi.org/10.1016/0021-9991(86)90099-9
- P. Asproulis, High Resolution Numerical Predictions of Hypersonic Flows on Unstructured Meshes, Ph. D. Dissertation, University of London, London, 1994.
- R. D. Reitz and R. Diwakar, "Effect of Drop Breakup on Fuel Sprays," SAE 860469, 1986.
- C. Bai and A. D. Gosman, "Mathematical Modelling of Wall Films Formed by Impinging Sprays," SAE 960626, 1996.
- S. Lee, J. Chung, Y. Park, C. Yu and W. Kim, "Characteristics of the In-cylinder Flow and Fuel Behavior with Respect to Fuel Injection Angle and Cone Angle in the PFI Dual Injection Engine," KSAE Annual Conference Proceedings, pp.81-82, 2014.