Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Hybrid Composite Die for the Production of the Supercapacitor

슈퍼커패시터 양산화를 위한 하이브리드 복합금형 개발

  • Kwon, Hyuk Hong (Dept. of Computer Aided Mechanical Design Engineering, DAEJIN UNIV.)
  • 권혁홍 (대진대학교 컴퓨터응용기계설계공학과)
  • Received : 2015.02.04
  • Accepted : 2015.02.09
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a high-speed procedure to be used in composite molding technology is developed for the production of a hybrid supercapacitor in a progressive and revolutionary current in a production system, as are the related operating conditions. Mold parts with solid modeling, the ease of programming of future mold product designs, tolerance management, and pre-explode tests by the building of a progressive die design system using Cimatron_E10 Die Design Software for the strip layout are done. The capacity of the super-hybrid composite mold design will save time and money through its verification of the manufacture of molds. We plan to apply this to future related products for production cost savings of more than 30% achieved by considering the components of the production costs, labor, and material costs of production as compared to conventional production methods.

Keywords

References

  1. Bae, Y. H, Ban, G. S, "Development of Adjust Plate Progressive Die," Journal of the KIIS, Vol. 17, No. 4, pp. 1-4, 2002.
  2. Choi, K. K, Jo, Y. H, Lee, D. C, "A Study on the Die Design and Manufacturing in the plunger parts of diesel vehicles," Proceedings of the KAIS Autumn Conference, pp. 958-961, 2011.
  3. Choi, K. K, Jo, Y. H, "A Study on the strip layout design in the plunger parts of diesel vehicles," Proceedings of the KAIS Fall Conference, pp. 929-932, 2010.
  4. Cimatron Co., Cimatron E Die Design Guide, 2008.
  5. Kwon, H. H, Lee, Y. M,"Development of Hybrid Composite Die for the Production of the Supercapacity,"Proceedings of the KSMTE Autumn Conference, p. 45, 2013.
  6. Balakrishnan Manoj, Issac Jason Cherian, "Design of the Multi-Stage Progressive Tool for Blanking a Sheet Metal Component,"Int. Journal of Precision Engineering and Manufacturing Vol. 15, No. 5, pp. 875-881, 2014. https://doi.org/10.1007/s12541-014-0411-0
  7. Guo G.Y., "Drawing Progressive Die Design for Shell Parts,"Metallic Materials and Manufacturing Technology 2013, p. 190, 2013.
  8. Zhao Z.F., Yang L.X., "Research on Progressive Die Design for Asymmetric U-Shaped Contactor,"Engineering materials; Engineering materials and application 2013, p. 701, 2013.
  9. Gao X.H., Wu M.Q., "Profiled Hole Stamping Progressive Die Design,"Linear drives for industry applications; LDIA 2013, p. 1889, 2013.
  10. Liu J., Ji C.D., "Research on NX-Based Progressive Die Design,"Advanced materials research : AMR Vol. 602/604, No. 3, pp. 1818-1821, 2013.
  11. Miguel V. ; Naranjo J. ; Manjabacas M.C., "Teaching-Learning Methodology of Progressive Die Design Based on Solidworks$^{(R)}$,"Materials science forum Vol. 759, pp. 91-100, 2013. https://doi.org/10.4028/www.scientific.net/MSF.759.91
  12. Sang-Pill Lee, Byung-Hyun Min, Kwan-young Lee, "Progressive Process planning and die design to improve the formability in fine blanking of the lock plate in car seatbelt," Journal of the Korean Society of Manufacturing Technology Vol. 12, No. 6, pp. 84-92, 2013.

Cited by

  1. An Experimental Study on Cooling Characteristic according to Fin Array of Aluminum Heat Sink vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.138