참고문헌
- Z. Zhao, M. Ramesh, D. Raabe, A. M. Cuitino and R. Radovitzky, Int. J. Plasticity, 24, 2278 (2008). https://doi.org/10.1016/j.ijplas.2008.01.002
- E. Heripre, M. Dexet, J. Crepin, L. Gelebart, A. Roos, M. Bornert and D. Caldemaison, Int. J. Plasticity, 23, 1512 (2007). https://doi.org/10.1016/j.ijplas.2007.01.009
- A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan and G. Cailetaud, Acta Mater., 55, 4121 (2007). https://doi.org/10.1016/j.actamat.2007.01.053
- S. R. Kalidindi, A. Bhattacharyya and R. D. Doherty, Proc. R. Soc. Lond. A, 460, 1935 (2004).
- C. Rehrl, B. Volker, S. Kleber, T. Antretter and R. Pippan, Acta Mater., 60, 2379 (2012). https://doi.org/10.1016/j.actamat.2011.12.052
- Y. Yang, L. Wang, T. R. Bieler, P. Eisenlohr and M. A. Crimp, Metall. Mater. Trans. A, 42, 636 (2011). https://doi.org/10.1007/s11661-010-0475-0
- D. Raabe, M. Sachtleber, Z. Zhao, F. Roters and S. Zaefferer, Acta Mater., 49, 3433 (2001)1. https://doi.org/10.1016/S1359-6454(01)00242-7
- D. Pyle, J. Lu, D. Littlewood and A. Maniatty, Comp. Mechanics, 52, 135 (2012).
- H. Lim, M. G. Lee, J. K. Kim, B. L. Adams and R. H. Wagoner, Int. J. Plasticity, 27, 1328 (2011). https://doi.org/10.1016/j.ijplas.2011.03.001
- F. Roters, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T. R. Bieler and D. Raabe, Acta Mater., 58, 1152 (2011).
- A. C. Lewis, M. A. Siddiq Qidwai and A. B. Geltmacher, Metall. Mater. Trans. A, 41, 2522 (2010). https://doi.org/10.1007/s11661-010-0284-5
- M. A. Siddiq Qidwai, A. C. Lewis and A. B. Geltmacher, Acta Mater., 57, 4233 (2009). https://doi.org/10.1016/j.actamat.2009.05.021
- T. R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D. E. Mason, M. A. Crimp and D. Raabe, Int. J. Plasticity, 25, 1655 (2009). https://doi.org/10.1016/j.ijplas.2008.09.002
- W. Ludwig, A. King, P. Reischig, M. Herbiga, E. M. Lauridsend, S. Schmidt, H. Proudhon, S. Forest, P. Cloetens, S. Rolland du Roscoat, J. Y. Buffière, T. J. Marrow and H. F. Poulsen, Mat. Sci. Eng. A, 524, 69 (2009). https://doi.org/10.1016/j.msea.2009.04.009
- A. Zeghadi, S. Forest, A. -F. Gourgues and O. Bouaziz, Phil. Mag., 87, 1425 (2007). https://doi.org/10.1080/14786430601009517
- O. Diard, S. Leclercq, G. Rousselier and G. Cailletaud, Int. J. Plasticity, 21, 691 (2005). https://doi.org/10.1016/j.ijplas.2004.05.017
- D. Chandrasekaran and M. Nygards, Mat. Sci. Eng. A, 365, 191 (2004). https://doi.org/10.1016/j.msea.2003.09.027
- O. Diard, S. Leclercq, G. Rousselier and G. Cailletaud, Comp. Mat. Sci., 25, 73 (2002). https://doi.org/10.1016/S0927-0256(02)00251-3
- F. Barbe, L. Decker, D. Jeulin and G. Cailletaud, Int. J. Plasticity, 17, 513 (2001). https://doi.org/10.1016/S0749-6419(00)00061-9
- J. Harder: Int. J. Plasticity, 15, 605 (1999). https://doi.org/10.1016/S0749-6419(99)00002-9
- R. Becker and O. Richmond, Modelling Simul. Mat. Sci. Eng., 2, 439 (1994). https://doi.org/10.1088/0965-0393/2/3A/002
- E. Marin and P. R. Dawson, Appl. Mech. Eng., 165, 1 (1998). https://doi.org/10.1016/S0045-7825(98)00034-6
- A. Acharya and J. L. Bassani, J. Mech. Phys. Solids, 48, 1565 (2000). https://doi.org/10.1016/S0022-5096(99)00075-7
- A. Acharya and A. J. Beaudoin, J. Mech. Phys. Solids, 48, 2213 (2000). https://doi.org/10.1016/S0022-5096(00)00013-2
- A. J. Beaudoin, A. Acharya, S. R. Chen, D. A. Korzekwa and M. G. Stout, Acta Mater., 48, 3409 (2000). https://doi.org/10.1016/S1359-6454(00)00136-1
- A. J. Beaudoin and A. Acharya, Mat. Sci. Eng. A, 309- 310, 411 (2001). https://doi.org/10.1016/S0921-5093(00)01620-8
- A. Ma, F. Roters and D. Raabe, Acta Mater., 54, 2169 (2006). https://doi.org/10.1016/j.actamat.2006.01.005
- M. Kuroda and V. Tvergaard, J. Mech. Phys. Solids, 54, 1789 (2006). https://doi.org/10.1016/j.jmps.2006.04.002
- F. T. Meissonnier, E. P. Busso and N. P. O'Dowd, Int. J. Plasticity, 17, 601 (2001). https://doi.org/10.1016/S0749-6419(00)00064-4
- A. Arsenlis, D. M. Parks, R. Becker and V. V. Bulatov, J. Mech. Phys. Solids, 52, 1213 (2004). https://doi.org/10.1016/j.jmps.2003.12.007
- U. Borg, Euro. J. Mech. A/Sol., 26, 313 (2006).
- C. J. Bayley, W. A. Brekelmans and M. G. D. Geers, Phil. Mag., 87, 1361 (2007). https://doi.org/10.1080/14786430600965107
- H. Wang, K. C. Hwang, Y. Huang, P. D. Wu, B. Liu, G. Ravichandran, C. -S. Han, H. Gao, Int. J. Plasticity, 23, 1540 (2007). https://doi.org/10.1016/j.ijplas.2007.01.004
- A. G. Evans and J. W. Hutchinson, Acta Mater., 57, 1675 (2007).
- J. M. Gerken and P. R. Dawson, J. Mech. Phys. Solids, 56, 1651 (2008). https://doi.org/10.1016/j.jmps.2007.07.012
- Y. Aoyagi and K. Shizawa, Int. J. Plasticity, 23, 1022 (2007). https://doi.org/10.1016/j.ijplas.2006.10.009
- K. S. Cheong, E. P. Busso and A. Arsenlis, Int. J. Plasticity, 21, 1797 (2005). https://doi.org/10.1016/j.ijplas.2004.11.001
- Y. Wang, J. W. Kysar, S. Vukelic and Y. L. Yao, J. Manuf. Sci. Eng., 131, 041014-1 (2009). https://doi.org/10.1115/1.3160370
- J. F. Nye, Acta Metall., 1, 153 (1953). https://doi.org/10.1016/0001-6160(53)90054-6
- U. F. Kocks, A. S. Argon and M. F. Ashby, Prog. Mater. Sci., 19, 1 (1975). https://doi.org/10.1016/0079-6425(75)90005-5
- P. Franciosi, M. Berveiller and A. Zaoui, Acta Metall., 28, 273 (1980). https://doi.org/10.1016/0001-6160(80)90162-5
- P. Franciosi and A. Zaoui, Acta Metall., 30, 2141 (1982). https://doi.org/10.1016/0001-6160(82)90135-3
- P. Franciosi and A. Zaoui, Acta Metall., 30, 1627 (1982). https://doi.org/10.1016/0001-6160(82)90184-5
- Y. Zhou, K. W. Neale and L. S. Toth, Int. J. Plasticity, 9, 961 (1993). https://doi.org/10.1016/0749-6419(93)90061-T
- D. Peirce, R. J. Asaro and A. Needleman, Acta Metall., 31, 1951 (1983). https://doi.org/10.1016/0001-6160(83)90014-7
- D. Peirce, C. F. Shih and A. Needleman, Computers Structures, 18, 875 (1984). https://doi.org/10.1016/0045-7949(84)90033-6
- P. M. Anderson and J. R. Rice, Acta Metall., 33, 409 (1985). https://doi.org/10.1016/0001-6160(85)90083-5
- Wigner, E., Seitz, F., 1933. On the constitution of metallic sodium. Physical Review 43, 804-810. https://doi.org/10.1103/PhysRev.43.804
- J. Harder, Int. J. Plasticity, 15, 605 (1999). https://doi.org/10.1016/S0749-6419(99)00002-9
- A. Arsenlis and D. M. Parks, Acta Mater., 47, 1597 (1999). https://doi.org/10.1016/S1359-6454(99)00020-8
- T. Hoc, C. Rey and M. L. Giorgi, J. Phys. IV France, 11, Pr5-243 (2001).
- L. Tabourot, M. Fivel and E. Rauch, Mater. Sci. Eng. A, 234-236, 639 (1997) https://doi.org/10.1016/S0921-5093(97)00353-5
- L. Tabourot, S. Dumoulin and P. Balland, J. Phys. IV France, 11, Pr5-111 (2001).
- R. Madec, B. Devincre, L. Kubin, T. Hoc and D. Rodney, Science, 301, 1879 (2003). https://doi.org/10.1126/science.1085477
- M. Fivel, L. Tabourot, E. Rauch and G. Canova, J. Phys. IV France, 8, Pr8-151 (1998).
- S. I. Rao, T. A. Parthasarathy, D. M. Dimiduk and P. M. Hazzledine, Phil. Mag., 84, 3195 (2004). https://doi.org/10.1080/14786430412331284432
- W. Mangen and E. Nembach, Acta Metall., 37, 1451 (1989). https://doi.org/10.1016/0001-6160(89)90177-6
- N. Hansen, Acta Metall., 25, 863 (1977). https://doi.org/10.1016/0001-6160(77)90171-7
- N. Hansen and B. Ralph, Acta Metall., 30, 411 (1982). https://doi.org/10.1016/0001-6160(82)90221-8
- Z. Jiang, J. Lian and B. Baudelet, Acta Metall. Mater., 43, 3349 (1995). https://doi.org/10.1016/0956-7151(95)00031-P
- X. Feaugas, Acta Mater., 47, 3617 (1999). https://doi.org/10.1016/S1359-6454(99)00222-0