참고문헌
- Won Kyeong Park, Su Jin Lee, Yong Su Park, and Han Jung Song, "Design of a Low Drop-out Regulator with a UVLO Protection Function", IEEK, vol. 50, no. 10, pp. 2691-2696, October 2013. https://doi.org/10.5573/ieek.2013.50.10.239
- Jin-Woo Kim and Shin-Il Lim, "A Design of High PSRR LDO over Wide Frequency Range without External Capacitor", IEEK, vol. 50, no. 12, pp. 3001-3008, December 2013.
- Kujik, "A Precision reference voltage source", IEEE J. Solid State Circuits, vol. 8, no. 3, pp. 222-226, June 1973. https://doi.org/10.1109/JSSC.1973.1050378
- Da-In Han, Hyeong-Soon Kim, Yeong-Seuk Kim, "Design of A 0.5V CMOS Bandgap Voltage Reference:" IEEK Fall Conference, 2012.
- Yoon-Jae Shin, Jun-Youn Lim, Kae-Dal Kwack, "A CMOS Bandgap Reference Voltage Generator Circuit with Sub-1.1-V Operation", IEEK CEIC, 20144.
- Banba, H., Shiga, H., Umezawa, A., Miyaba, T., Tanzawa, T., Atsumi, S., and Sakui, K.: "A CMOS bandgap reference circuit with sub-1-V operation", IEEE J. Solid State Circuits, 1999, vol. 34, no. 5, pp. 670-674, May 1999. https://doi.org/10.1109/4.760378
- Ka Nang Leung, Philip K. T. Mok, "A Sub-1-V 15-ppm/ C CMOS Bandgap Voltage Reference Without Requiring Low Threshold Voltage Device", IEEE J. Solid State Circuits, vol. 37, no. 4, pp. 526-530, April 2002. https://doi.org/10.1109/4.991391
- Lee, S., Lee, H., Woo, J.-K., Kim, S. "Low-voltage bandgap reference with output-regulated current mirror in 90 nm CMOS", IET Electron. Lett., vol. 46, no. 14, pp. 976-977, July 2010. https://doi.org/10.1049/el.2010.1546
- Malcovati, P., Maloberti, F., Fiocchi, C., and Pruzzi, M. "Curvature-compensated BiCMOS bandgap with 1-V supply voltage", IEEE J. Solid State Circuits, vol. 36, no. 7, pp. 1076-1081, July 2001. https://doi.org/10.1109/4.933463
- Boni, A. "Op-amps and startup circuits for CMOS bandgap references with near 1-V supply", IEEE J. Solid State Circuits, vol. 37, no. 10, pp. 1339-1343, Oct. 2002. https://doi.org/10.1109/JSSC.2002.803055
- Dehghani, R., Atarodi, S. M., "A new low voltage precision CMOS current reference with no external components", IEEE Tran. Circuits and Systems-II, vol. 50, no. 12, pp. 928-932, Dec. 2003. https://doi.org/10.1109/TCSII.2003.820239
- Behzad Razavi, "Design of Analog CMOS Integrated Circuits", McGraw-Hill, 2001.
-
Annema, A.J. 'A
$0.0025mm^2$ bandgap voltage reference for 1.1 V supply in standard 0.16${\mu}m$ CMOS'. IEEE Int. Solid-State Circuits Conf. (ISSCC), San Francisco, USA, 19-23 February 2012, pp. 364-366 - D.F. Bowers, E.J. Modica, "Curvature-corrected low-noise sub-bandgap reference in 28 nm CMOS technology", IET Electronics letter, Vol. 50, No. 5, pp. 396-398, Feb. 2014. https://doi.org/10.1049/el.2013.3952