DOI QR코드

DOI QR Code

Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint

  • Benchiha, Aicha (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes) ;
  • Madani, Kouider (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes)
  • 투고 : 2014.06.03
  • 심사 : 2015.01.12
  • 발행 : 2015.03.10

초록

In this study, the finite element method was used to analyze the distribution of the adhesive shear stresses in the single-lap bonded joint of two plates 2024-T3 aluminum with and without defects. The effects of the adhesive properties (shear modulus, the thickness and the length of the adhesive were highlighted. The results prove that the shear stresses are located on the free edges of the adhesively bonding region, and reach maximum values near the defect, because the concentration of high stress occurs near this area.

키워드

참고문헌

  1. Chen, Z., Adams, R.D. and da Silva, L.F.M. (2011), "Prediction of crack initiation and propagation of adhesive lap joints using an energy failure criterion", Eng. Fract. Mech., 78, 990-1007. https://doi.org/10.1016/j.engfracmech.2010.12.004
  2. Choupani, N. (2009), "Characterization of fracture in adhesively bonded double-lap joints", Int. J. Adhes. Adhes., 29,761-773. https://doi.org/10.1016/j.ijadhadh.2009.05.002
  3. da Silva, L.F.M., das Neves, P.J.C., Adams, R.D., Wang, A. and Spelt, J.K. (2009), "Analytical models of symposia bonded joints - Part II: Comparative study", Int. J. Adhes. Adhes., 29 ,331-341 https://doi.org/10.1016/j.ijadhadh.2008.06.007
  4. Haghani, R., Al-Emrani, M. and Kliger, R.J. (2010), "Stress distribution in adhesive joints with tapered laminates - effect of tapering length and material properties", Compos. Mater., 44(3), 287-302. https://doi.org/10.1177/0021998309345320
  5. Khandoker, N., Ibrahim, R., Yan, W., Hawkins, S.C. and Huynh, C.P. (2014), "Mixed mode peeling of spinnable carbon nanotube webs", Mater. Des., 62,7-13. https://doi.org/10.1016/j.matdes.2014.04.085
  6. Luo, Q. and Tong, L. (2007), "Fully-coupled nonlinear analysis of single lap adhesive joints", Int. J. Solid. Struct., 44 , 2349-2370. https://doi.org/10.1016/j.ijsolstr.2006.07.009
  7. Madani, K., Touzain, S., Feaugas, X., Roy, A. and Cohendoz, S. (2009), "Analyze of the notch effect on the distribution of the stresses in the adhesive layer between two bonded aluminum 2024-T3 plates", J. Mater. Technol., 97, 315-324. https://doi.org/10.1051/mattech/2009043
  8. Madani, K., Touzain, S., Feaugas, X., Benguediab, M. and Ratwani, M. (2008), "Numerical analysis for the determination of the stress intensity factors and crack opening displacements in plates repaired with single and double composite patches", Comput. Mater. Sci., 42, 385-393.
  9. Mokhtari, M., Madani, K., Belhouari, M., Touzain, S., Feaugas, X. and Ratwani, M. (2013), "Effects of composite adherend properties on stresses in double lap bonded joints", Mater. Des., 44, 633-639. https://doi.org/10.1016/j.matdes.2012.08.001
  10. Nisar, J.A. and Hashim, S.A. (2010), "Meso-scale laminate adhesive joints for pultrusions", Int. J. Adhes. Adhes., 30,763-773. https://doi.org/10.1016/j.ijadhadh.2010.08.002
  11. Oudad, W., Madani, K., Bouiadjra, B.B., Belhouari, M., Cohendoz, S., Touzain, S. and Feaugas, X. (2012), "Effect of humidity absorption by the adhesive on the performances of bonded composite repairs in aircraft structures", Compos. Part B., 43, 3419-24. https://doi.org/10.1016/j.compositesb.2012.01.028
  12. Park, J.H., Choi, J.H. and Kweon, J.H. (2010), "Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses", Compos. Struct., 92, 2226-2235. https://doi.org/10.1016/j.compstruct.2009.08.037
  13. Sathiyaseelan, S. and Baskar, K. (2012), "Numerical study on thin plates under the combined action of shear and tensile stresses", Struct. Eng. Mech., 42(6), 867-882. https://doi.org/10.12989/sem.2012.42.6.867
  14. Seong, M.S., Kim, T.H., Nguyen, K.H., Kweon, J.H. and Choi, J.H. (2008), "A parametric study on the failure of bonded single-lap joints of carbon composite and aluminum", Compos. Struct., 86, 135-145. https://doi.org/10.1016/j.compstruct.2008.03.026
  15. Sugiman, S., Crocombe, A.D. and Aschroft, I.A. (2013), "The fatigue response of environmentally degraded adhesively bonded aluminium structures", Int. J. Adhes. Adhes., 41, 80-91. https://doi.org/10.1016/j.ijadhadh.2012.10.003
  16. Swenson, D. and James, M. FRANC2D/L. (2004), "A crack propagation simulator for plane layered Structures", User's Guide.
  17. Xu, W., Yu, H. and Tao, C. (2014), "Influence of randomly distributed adhesive properties on the overall mechanical response of metallic adhesively bonded joints", Int. J. Adhes. Adhes., 52, 48-56. https://doi.org/10.1016/j.ijadhadh.2014.04.001

피인용 문헌

  1. Numerical analysis of the effect of the presence, number and shape of bonding defect on the shear stresses distribution in an adhesive layer for the single-lap bonded joint; Part 1 vol.62, 2017, https://doi.org/10.1016/j.ast.2016.11.024
  2. A new analytical approach for optimization design of adhesively bonded single-lap joint vol.59, pp.2, 2016, https://doi.org/10.12989/sem.2016.59.2.313
  3. Influence of the presence of defects on the adhesive layer for the single-lap bonded joint—Part II: Probabilistic assessment of the critical state vol.63, 2017, https://doi.org/10.1016/j.ast.2016.12.020
  4. Experimental and numerical disbond localization analyses of a notched plate repaired with a CFRP patch vol.63, pp.3, 2015, https://doi.org/10.12989/sem.2017.63.3.361
  5. Impact of composite patch on the J-integral in adhesive layer for repaired aluminum plate vol.4, pp.6, 2015, https://doi.org/10.12989/aas.2017.4.6.679
  6. Thermoelastic effect on inter-laminar embedded delamination characteristics in Spar Wingskin Joints made with laminated FRP composites vol.35, pp.3, 2020, https://doi.org/10.12989/scs.2020.35.3.439
  7. Numerical modeling and prediction of adhesion failure of adhesively bonded composite T-Joint structure vol.74, pp.6, 2020, https://doi.org/10.12989/sem.2020.74.6.723