Smart Structures and Systems

  • 제15권2호
  • /
  • Pages.283-297
  • /
  • 2015
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Electromechanical impedance-based long-term SHM for jacket-type tidal current power plant structure

  • Min, Jiyoung (Structural Engineering Research Division, SOC Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Yi, Jin-Hak (Coastal and Environmental Engineering Division, Korea Institute of Ocean Science and Technology) ;
  • Yun, Chung-Bang (School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology)
  • 투고 : 2014.05.01
  • 심사 : 2014.11.18
  • 발행 : 2015.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Jacket-type offshore structures are always exposed to severe environmental conditions such as salt, high speed of current, wave, and wind compared with other onshore structures. In spite of the importance of maintaining the structural integrity for an offshore structure, there are few cases to apply a structural health monitoring (SHM) system in practice. The impedance-based SHM is a kind of local SHM techniques and to date, numerous techniques and algorithms have been proposed for local SHM of real-scale structures. However, it still requires a significant challenge for practical applications to compensate unknown environmental effects and to extract only damage features from impedance signals. In this study, the impedance-based SHM was carried out on a 1/20-scaled model of an Uldolmok current power plant structure in Korea under changes in temperature and transverse loadings. Principal component analysis (PCA)-based approach was applied with a conventional damage index to eliminate environmental changes by removing principal components sensitive to them. Experimental results showed that the proposed approach is an effective tool for long-term SHM under significant environmental changes.

키워드

과제정보

연구 과제번호 : Development of active-controlled tidal stream generation technology

연구 과제 주관 기관 : Ministry of Oceans and Fisheries, KIOST

참고문헌

  1. Abe, M., Park, G. and Inman, D.J. (2000), "Impedance-based monitoring of stress in thin structural members", Proceedings of the 11th International Conference on Adaptive Structures and Technologies, Nagoya, Japan.
  2. Annamdas, V.G.M., Yang, Y. and Soh, C.K. (2007), "Influence of loading on the electromechanical admittance of piezoceramic transducers", Smart Mater. Struct., 16(5), 1888-1897. https://doi.org/10.1088/0964-1726/16/5/045
  3. Bhalla, S., Naidu, A.S.K. and Soh, C.K. (2002), "Influence of structure-actuator interactions and temperature on piezoelectric mechatronic signatures for NDE", Proceedings of the ISSS-SPIE Int'l Conferences on Smart Materials Structures and Systems, Bangalore, India.
  4. Dunteman, G.H. (1989), Principal Components Analysis, Sage Publications, London.
  5. Giurgiutiu, V. (2008), Structural Health Monitoring With Piezoelectric Wafer Active Sensors, Academic Press, USA.
  6. Jlooiffe, I.T. (1986), Principal Component Analysis, Springer, New York.
  7. Kim, M.K., Lim, H.J., Sohn, H. and Park, C.Y. (2010), "Impedance-based bolt loosening detection under varying temperature and loading", Proceedings of the Asian Pacific Workshop on Structural Health Monitoring, Tokyo, Japan.
  8. Koo, K.Y., Park, S., Lee, J.J. and Yun, C.B. (2009), "Automated impedance-based structural health monitoring incorporating effective frequency shift for compensating temperature effects", J. Intel. Mat. Syst. Str., 20, 367-377. https://doi.org/10.1177/1045389X08088664
  9. Krishnamurthy, K., Lalande, F. and Rogers, C.A. (1996), "Effects of temperature on the electrical impedance of piezoelectric sensors", Proceedings of the SPIE Smart Structures and Materials: Smart Structures and Integrated Systems, 2717, 302-310.
  10. Liang, C., Sun, F.P. and Rogers, C.A. (1996), "Electro-mechanical impedance modeling of active material systems", Smart Mater. Struct., 5(2), 171-186. https://doi.org/10.1088/0964-1726/5/2/006
  11. Lim, H.J., Kim, M.K., Sohn, H. and Park, C.Y. (2011), "Impedance based damage detection under varying temperature and loading conditions", NDT & E Int., 44(8), 740-750. https://doi.org/10.1016/j.ndteint.2011.08.003
  12. Min, J., Yun, C.B., Park, S., Lee, C.G. and Lee, C. (2012), "Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity", Eng. Struct., 39, 210-220. https://doi.org/10.1016/j.engstruct.2012.01.012
  13. Min, J., Park, S., Yun, C.B. and Song, B. (2010), "Development of a low-cost multifunctional wireless impedance sensor node", Smart Struct. Syst., 6(5-6), 689-709. https://doi.org/10.12989/sss.2010.6.5_6.689
  14. Ong, C.W., Yang, Y.W., Naidu, A.S.K., Lu, Y. and Soh, C.K. (2002), "Application of the electro-mechanical impedance method for the identification of in situ stress in structures", Proceedings of the SPIE Conference on Smart Structures, Devices, and Systems. 4935, San Diego, CA.
  15. Park, G., Kabeya, K., Cudney, H.H. and Inman, D.J. (1999), "Impedance-based structural health monitoring for temperature varying applications", JSME Int. J. Series A, 42(2), 249-258. https://doi.org/10.1299/jsmea.42.249
  16. Park, G., Sohn, H., Farrar, C.R. and Inman, D.J. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib. Digest, 35(6), 451-463. https://doi.org/10.1177/05831024030356001
  17. Park, G., Farrar, C.R., Rutherford, A.C. and Robertson, A.N. (2006), "Piezoelectric active sensor self-diagnostics using electrical admittance measurements", J. Vib. Acoust., 128(4), 469-476. https://doi.org/10.1115/1.2202157
  18. Peairs, D.M., Tarazaga, P.A. and Inman, D.J. (2006), "A study of the correlation between PZT and MFC resonance peaks and damage detection frequency intervals using the impedance method", Proceedings of the International Conference on Noise and Vibration Engineering, Leuven, Belgium.
  19. Puskar, F.J., Spong, R.E. and Ku, A. (2006), "Assessment of fixed offshore platform performance in hurricane ivan", Proceedings of the Offshore Technology Conference, Houston, Texas, USA.
  20. Spong, R.E. and Puskar, F. (2006), Assessment of fixed offshore platform performance in hurricanes andrew, Liliand Ivan, Report. MMS Project No. 549, Energy Engineering Inc., Houston,Texas.
  21. Wintle, J.B. and Pargeter, R.J. (2005), "Technical failure investigation of welded structures (or how to get the most out of failures)", Eng. Fail. Anal., 12(6), 1027-1037. https://doi.org/10.1016/j.engfailanal.2005.01.005
  22. Yi, J.H., Park, W.S., Park, J.S. and Lee, K.S. (2009), "Structural health monitoring system for 'Uldolmok' tidal current power pilot plant and its applications", Proceedings of the ASME International Conference on Ocean, Offshore and Arctic Engineering, Hawaii, USA.

피인용 문헌

  1. Experimental investigation for an isolation technique on conducting the electromechanical impedance method in high-temperature pipeline facilities vol.383, 2016, https://doi.org/10.1016/j.jsv.2016.07.036
  2. Laboratory tests on local damage detection for jacket-type offshore structures using optical FBG sensors based on statistical approaches vol.124, 2016, https://doi.org/10.1016/j.oceaneng.2016.07.060
  3. Recent R&D activities on structural health monitoring in Korea vol.3, pp.1, 2016, https://doi.org/10.12989/smm.2016.3.1.091
  4. Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage vol.26, pp.12, 2017, https://doi.org/10.1088/1361-665X/aa931b
  5. Developing a SIM strategy for offshore jacket platforms based on the FE model updating and a novel simplified method vol.145, 2017, https://doi.org/10.1016/j.oceaneng.2017.08.013
  6. RBFN-based temperature compensation method for impedance monitoring in prestressed tendon anchorage vol.25, pp.6, 2018, https://doi.org/10.1002/stc.2173
  7. Crack detection in rectangular plate by electromechanical impedance method: modeling and experiment vol.19, pp.4, 2015, https://doi.org/10.12989/sss.2017.19.4.361
  8. Advances and challenges in impedance-based structural health monitoring vol.4, pp.4, 2015, https://doi.org/10.12989/smm.2017.4.4.301
  9. PCA-based filtering of temperature effect on impedance monitoring in prestressed tendon anchorage vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.057
  10. Modeling, Simulation, Experimentation, and Compensation of Temperature Effect in Impedance-Based SHM Systems Applied to Steel Pipes vol.19, pp.12, 2019, https://doi.org/10.3390/s19122802
  11. A review on deep learning-based structural health monitoring of civil infrastructures vol.24, pp.5, 2015, https://doi.org/10.12989/sss.2019.24.5.567